“This site contains affiliate links for which OEMDTC may be compensated” |
August 4, 2021 NHTSA CAMPAIGN NUMBER: 21V607000
Incorrect Seat Belt Assemblies Installed/FMVSS 208
An unsecured child restraint system can increase the risk of injury during a crash.
NHTSA Campaign Number: 21V607
Manufacturer Volkswagen Group of America, Inc.
Components SEAT BELTS
Potential Number of Units Affected 12,060
Summary
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2021 ID4 vehicles. Incorrect rear outboard seat belt assemblies without an automatic locking retractor (ALR) function may have been installed, which can prevent the child restraint system from securing properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, “Occupant Crash Protection.”
Remedy
Dealers will inspect, and replace as necessary, the rear outboard seat belt assemblies, free of charge. Owner notification letters were mailed August 27, 2021. Owners may contact Volkswagen customer service at 1-800-893-5298. Volkswagen’s number for this recall is 69CQ.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Volkswagen has a Recall
Problem Description
Vehicles may have received an incorrect seat belt assembly not released for the U.S. market. Only the outer rear seats are potentially affected. The potentially incorrect seat belt assemblies do not have the automatic locking retractor (ALR) function required by FMVSS 208 implemented.
The ALR function is required in the US market by FMVSS 208 S7.1.1.5. This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. With child restraint seats for which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable so that the seat belt assembly can be used to tightly secure the child restraint seat, there is an increased risk of injury in a crash to the occupant of the child restraint seat.
Corrective Action
Inspect and, if necessary, replace any incorrect seat belt assembly.
Owner Notification
Owner notification will take place in August 2021. Owner letter examples are included in this bulletin for your reference.
Repair:
REPAIR AVAILABLE – August 13, 2021 / Inspect and, if necessary, replace any incorrect seat belt assembly.
Quantity | Part Description | Part Number |
Up to 1 | SEAT BELT (Left) | 11A-857-805-C RAA |
Up to 1 | SEAT BELT (Right) | 11A-857-806-C RAA |
2 | GROMMET | 4L0-886-373 |
Repair Overview
Inspect both rear outboard seat belts and replace if necessary.
Seat Belt Inspection
Inspect left and right outboard seat belt buckles:
- Check the part number stamped on the buckle.
- The CORRECT part numbers are as follows:
-
- Left side:
-
-
- 11A-857-805-A
-
-
-
- 11A-857-805-C
-
-
- Right side:
-
-
- 11A-857-806-A
-
-
-
- 11A-857-806-C
-
NOTE
The part number may be followed by a three letter color code (RAA, for example).
- If the part numbers are CORRECT:
-
- No further work is required.
- If the part numbers do not match the part numbers listed above:
-
- The affected seat belt must be replaced.
Seat Belt Replacement
Replace affected seat belt according to the ELSA Repair Manual:
- See ELSA Repair Manual: Repair manual > Body > Body Interior > 69 Passenger Protection, Airbags, Seat Belts > Seat Belts > Outer Rear Three-Point Seat Belt, Removing and Installing
Note the following during the repair:
- Torque bolt <1> to 40 Nm.
- Torque nut <2> to 40 Nm.
- The rear bench seat grommets must be replaced.
Part Description | Part Number |
Seat Grommet (x2) | 4L0-886-373 |
- Adhere to all warnings outlined in the repair manual.
- Reference ELSA Repair Manual for special tools.
SEOCONTENT-START
VOLKSWAGEN DEALER COMMUNICATION – USA Ensure all dealership personnel are aware of this notice so they are able to address customer questions. Contact Warranty if you require additional assistance. Direct press inquiries to Volkswagen Public Relations. Volkswagen Customer Protection 69CQ_DLR_LAUNCH Repair Available – Compliance Recall 69CQ / Rear Outboard Seat Belts This notice is for: Dealer Principal General Manager Sales Managers Service Manager Parts Manager Service Consultant Warranty Administrator Technicians Date: August 12, 2021 Issue: Vehicles may have received an incorrect seat belt assembly not released for the U.S. market. Only the outer rear seats are potentially affected. The potentially incorrect seat belt assemblies do not have the automatic locking retractor (ALR) function required by FMVSS 208 implemented. This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. With child restraint seats for which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable so that the seat belt assembly can be used to tightly secure the child restraint seat, there is an increased risk of injury in a crash to the occupant of the child restraint seat. Repair: REPAIR AVAILABLE – August 13, 2021 / Inspect and, if necessary, replace any incorrect seat belt assembly. See ELSA/ServiceNet for complete repair & claiming instructions Check both the daily Campaign Open Inventory report and OMD for affected vehicles in inventory. Verify OPEN status in ELSA on the day of repair. Repair every affected inventory vehicle before delivery to consumers. Parts Department: There will be no parts allocation. Please reference the Repair Projection Tool (below) to view your potential VIN population. Do not order parts unless they are absolutely needed! The expected need for parts is less than 1%. Ordering parts unnecessarily will cause delays. Affected Vehicles Country Beginning Model Year Ending Model Year Vehicle Vehicle Count USA 2021 2021 ID4 12,060 *Counts reflect overall population; some vehicles may have already been repaired. Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign inquiry & verification source. Notes: Schedule owner repairs immediately Owner mailing – August 2021 U.S.A.: Loaner/rental coverage cannot be claimed under this action. However, loaner/rental may be covered under the Alternate Transportation Program. Please refer to the Volkswagen Warranty Policy and Procedures Manual for loaner claims information and reimbursement details. IMPORTANT REMINDER: VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. -END OF MESSAGE
*********************************************************************************************************
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021Form No. F_3.4_AHQ-GQO-CP-C_045 Rev. 6.0 69CQ Page 1 of 10 Compliance Recall Code: 69CQ Subject Rear Outboard Seat Belts Release Date August 13, 2021 Affected Vehicles Country Beginning Model Year Ending Model Year Vehicle Vehicle Count USA 2021 2021 ID4 12,060 Check Campaigns/Actions screen in ELSA on the day of repair to verify that a VIN qualifies for repair under this action. ELSA is the only valid campaign inquiry & verification source. Campaign status must show “open.” If ELSA shows other open action(s), inform your customer so that the work can also be completed at the same time the vehicle is in the workshop for this campaign. Problem Description Vehicles may have received an incorrect seat belt assembly not released for the U.S. market. Only the outer rear seats are potentially affected. The potentially incorrect seat belt assemblies do not have the automatic locking retractor (ALR) function required by FMVSS 208 implemented. The ALR function is required in the US market by FMVSS 208 S7.1.1.5. This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. With child restraint seats for which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable so that the seat belt assembly can be used to tightly secure the child restraint seat, there is an increased risk of injury in a crash to the occupant of the child restraint seat. Corrective Action Inspect and, if necessary, replace any incorrect seat belt assembly. Code Visibility On or about August 13, 2021, the campaign code will be applied to affected vehicles. Owner Notification Owner notification will take place in August 2021. Owner letter examples are included in this bulletin for your reference. Additional Information Please alert everyone in your dealership about this action, including Sales, Service, Parts and Accounting personnel. Contact Warranty if you have any questions. IMPORTANT REMINDER ON VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. Dealers must ensure that every affected inventory vehicle has this campaign completed before delivery to consumers. Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete. Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com. The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 69CQ Page 2 of 10 Parts Information (if required) CRITICAL PARTS INFORMATION STOP! Do not order the following parts unless they are absolutely needed! The expected need for the following parts is less than 1%. Ordering parts unnecessarily will cause delays. Parts Control Type: VIN to Order If parts are needed to support a vehicle repair: • US Dealers – use AVA Parts Control Type: Free Order Parts will be managed by Free Order Initial Allocation: NO There will be no parts allocation. Please reference the Repair Projection Tool (below) to view your potential VIN population. Repair Projection Tool: (right click to open) Criteria Quantity Part Number P.O.C. Part Description Ordering Method (see description above) 01 Up to 1 11A-857-805-C RAA SEAT BELT (Left) VIN to Order Up to 1 11A-857-806-C RAA SEAT BELT (Right) VIN to Order 2 4L0-886-373 GROMMET Free Order NOTE The specified part numbers reflect the status at the start of this action. Interim updates made in ETKA can cause a listed part number to become unavailable. In this case, the new part number specified in ETKA should be used. The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 3 of 10 Claim Entry Instructions The labor times listed here may differ from the labor operations and labor times listed in ELSA. After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated elsewhere. Attach the ELSA screen print showing action open on the day of repair to the repair order. If customer refused campaign work: U.S. dealers: Submit request via WISE under the Campaigns/Update/Recall Closure option. Service Number 69CQ Damage Code 0099 Parts Vendor Code WWO Claim Type Sold vehicle: 7 10 Unsold vehicle: 7 90 Causal Indicator Mark labor as causal Vehicle Wash/Loaner Do not claim wash/loaner under this action U.S.A.: Loaner/rental coverage cannot be claimed under this action. However, loaner/rental may be covered under the Alternate Transportation Program. Please refer to the Volkswagen Warranty Policy and Procedures Manual for loaner claims information and reimbursement details. Criteria I.D. 01 Inspect left rear and right rear outboard seat belts. Seat belts are correct. No further work is required. LABOR Labor Op Time Units Description 0183 00 99 20 Inspect rear seat belts, no further work required Continued on next page The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 4 of 10 OR Inspect left rear and right rear outboard seat belts. One seat belt is incorrect. Replace affected seat belt. LABOR Labor Op Time Units Description 6912 55 99 80 Replace one rear outboard seat belt 0150 00 00 Time stated on diagnostic protocol Clear repair related faults (if necessary) PARTS Quantity Part Number Description 1.00 11A857805C RAA or 11A857806C RAA SEAT BELT 2.00 4L0886373 GROMMET OR Inspect left rear and right rear outboard seat belts. Both seat belts are incorrect. Replace affected seat belts. LABOR Labor Op Time Units Description 6912 56 99 110 Replace both rear outboard seat belts 0150 00 00 Time stated on diagnostic protocol Clear repair related faults (if necessary) PARTS Quantity Part Number Description 1.00 11A857805C RAA SEAT BELT 1.00 11A857806C RAA SEAT BELT 2.00 4L0886373 GROMMET The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 5 of 10 Customer Letter Example (USA) This notice applies to your vehicle: , NHTSA: 21V607 Subject: Compliance Recall 69CQ – Rear Outboard Seat Belts Dear Volkswagen Owner, This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Volkswagen has decided that certain 2021 model year Volkswagen I.D.4 vehicles fail to conform to Federal Motor Vehicle Safety Standard No. 208 Occupant crash protection. Our records show that you are the owner of a vehicle affected by this action. What is the issue? Vehicles may have received an incorrect seat belt assembly not released for the U.S. market. Only the outer rear seats are potentially affected. The potentially incorrect seat belt assemblies do not have the automatic locking retractor (ALR) function required by FMVSS 208 implemented. This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. With child restraint seats for which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable so that the seat belt assembly can be used to tightly secure the child restraint seat, there is an increased risk of injury in a crash to the occupant of the child restraint seat. What will we do? To correct this noncompliance, your authorized Volkswagen dealer will inspect and, if necessary, replace one or both rear outboard seat belts. This work will take up to an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule. What should you do? Please contact your authorized Volkswagen dealer without delay to schedule this recall repair. To set up an appointment online, please visit www.vw.com/find-a-dealer. Lease vehicles and address changes If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card and mail it to us so we can update our records. Can we assist you further? If your authorized Volkswagen dealer fails or is unable to complete this work free of charge within a reasonable time, or if you should have any questions about this communication, please reach out to us using your preferred method of communication at www.vw.com/contact or by calling us at 800-893-5298. Checking your vehicle for open Recalls and Service Campaigns To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit www.vw.com/owners/recalls and enter your Vehicle Identification Number (VIN) into the Recall/Service Campaign Lookup tool. If you still cannot obtain satisfaction, you may file a complaint with: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov. We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle. Sincerely, Volkswagen Customer Protection The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 6 of 10 Repair Overview • Inspect both rear outboard seat belts and replace if necessary. NOTE • These repair instructions may differ from the labor operations and labor times listed in ELSA. • Damages resulting from improper repair or failure to follow these work instructions are the dealer’s responsibility and are not eligible for reimbursement under this action. • This procedure must be read in its entirety prior to performing the repair. • Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not identically match all affected vehicles. • Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action. • When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate inside the shop to avoid temperature-related component damage/breakage. The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 7 of 10 Repair Instruction Section A – Check for Previous Repair TIP If Campaign Completion label is present, no further work is required. • Enter the VIN in Elsa and proceed to the “Campaign/Action” screen. TIP On the date of repair, print this screen and keep a copy with the repair order. • Confirm the Campaign/Action is open . If the status is closed, no further work is required. • Note the Applicable Criteria ID for use in determining the correct work to be done and corresponding parts associated. CRITICAL REPAIR STEP STOP! If multiple software update Campaign/Actions are open, they must be performed in order of the Start date . The oldest should be performed first. • All Safety Recalls must be completed prior to completing this campaign. • Proceed to Section B. The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 8 of 10 Section B – Seat Belt Inspection Inspect left and right outboard seat belt buckles: • Check the part number stamped on the buckle. • The CORRECT part numbers are as follows: o Left side: 11A-857-805-A 11A-857-805-C o Right side: 11A-857-806-A 11A-857-806-C NOTE The part number may be followed by a three letter color code (RAA, for example). • If the part numbers are CORRECT: o No further work is required. o Proceed to Section D. • If the part numbers do not match the part numbers listed above: o The affected seat belt must be replaced. o Proceed to Section C. The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 9 of 10 Section C – Seat Belt Replacement Replace affected seat belt according to the ELSA Repair Manual: • See ELSA Repair Manual: Repair manual > Body > Body Interior > 69 Passenger Protection, Airbags, Seat Belts > Seat Belts > Outer Rear Three-Point Seat Belt, Removing and Installing Note the following during the repair: • Torque bolt <1> to 40 Nm. • Torque nut <2> to 40 Nm. • The rear bench seat grommets must be replaced. Part Number Part Description 4L0-886-373 Seat Grommet (x2) • Adhere to all warnings outlined in the repair manual. • Reference ELSA Repair Manual for special tools. • After repairs are complete: o Proceed to Section D. The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Volkswagen dealer. 2021 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved. August 2021 60CQ Page 10 of 10 Section D – Campaign Completion Label Install Campaign Completion Label • Fill out and affix Campaign Completion Label, part number CAMP 010 000, next to the vehicle emission control information label. TIP Ensure Campaign Completion Label does not cover any existing label(s). Proceed to Section E Section E – Parts Return/Disposal Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S.**************************************************************************************************************Form No. F_3.4_AHQ-GQO-CP-C_060 Rev.3.0 69CQ USA IMPORTANT SAFETY RECALL Volkswagen of America, Inc. 3800 Hamlin Road Auburn Hills, MI 48326 This notice applies to your vehicle: , NHTSA: 21V607 Subject: Compliance Recall 69CQ – Rear Outboard Seat Belts Dear Volkswagen Owner, This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Volkswagen has decided that certain 2021 model year Volkswagen I.D.4 vehicles fail to conform to Federal Motor Vehicle Safety Standard No. 208 Occupant crash protection. Our records show that you are the owner of a vehicle affected by this action. What is the issue? Vehicles may have received an incorrect seat belt assembly not released for the U.S. market. Only the outer rear seats are potentially affected. The potentially incorrect seat belt assemblies do not have the automatic locking retractor (ALR) function required by FMVSS 208 implemented. This noncompliance does not impact the compliance or functionality of the seat belt assemblies with respect to their normal use by adult passengers or use of the LATCH system to secure child restraint seats. With child restraint seats for which the vehicle owner elects to use the seat belt to secure the child restraint seat instead of the LATCH system, if the seat belt is not lockable so that the seat belt assembly can be used to tightly secure the child restraint seat, there is an increased risk of injury in a crash to the occupant of the child restraint seat. What will we do? To correct this noncompliance, your authorized Volkswagen dealer will inspect and, if necessary, replace one or both rear outboard seat belts. This work will take up to an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule. What should you do? Please contact your authorized Volkswagen dealer without delay to schedule this recall repair. To set up an appointment online, please visit www.vw.com/find-a-dealer. Lease vehicles and address changes If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card and mail it to us so we can update our records. Form No. F_3.4_AHQ-GQO-CP-C_060 Rev.3.0 69CQ USA IMPORTANT SAFETY RECALL Can we assist you further? If your authorized Volkswagen dealer fails or is unable to complete this work free of charge within a reasonable time, or if you should have any questions about this communication, please reach out to us using your preferred method of communication at www.vw.com/contact or by calling us at 800- 893-5298. Checking your vehicle for open Recalls and Service Campaigns To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit www.vw.com/owners/recalls and enter your Vehicle Identification Number (VIN) into the Recall/Service Campaign Lookup tool. If you still cannot obtain satisfaction, you may file a complaint with: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov. We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle. Sincerely, Volkswagen Customer Protection Formulario número F_3.4_AHQ-GQO-CP-C_060 Rev.3.0 69CQ USA IMPORTANTE LLAMADO A REVISIÓN POR SEGURIDAD Volkswagen of America, Inc. 3800 Hamlin Road Auburn Hills, MI 48326 <DIRECCIÓN DEL CLIENTE> <CIUDAD, ESTADO Y CÓDIGO POSTAL DEL CLIENTE> Este aviso se aplica a su vehículo: <LÍNEA>, Administración Nacional de Seguridad del Tráfico en las Carreteras (NHTSA): 21V607 Asunto: Llamado a revisión por cumplimiento 69CQ – Cinturones de seguridad de los asientos al lado de las ventanillas de atrás Estimado propietario de un Volkswagen: Le enviamos este aviso de conformidad con la Ley Nacional de Seguridad del Tráfico y Vehículos Motorizados. Volkswagen decidió que algunos vehículos Volkswagen I.D.4 modelo 2021 no cumplen con la Norma federal de seguridad de los vehículos de motor (FMVSS) número 208, Protección contra choques para los pasajeros. Nuestros registros muestran que usted es propietario de un vehículo afectado por esta acción. ¿Cuál es el problema? Es posible que los vehículos tengan un ensamblaje del cinturón de seguridad incorrecto que no se lanzó para el mercado de Estados Unidos. Solo los asientos traseros al lado de las ventanillas tienen este posible defecto. Los ensamblajes de cinturones de seguridad posiblemente defectuosos no tienen implementada la función de retractor de bloqueo automático (ALR) requerida por la FMVSS 208. Este incumplimiento no afecta el cumplimiento o la funcionalidad de los conjuntos de cinturones de seguridad con respecto a su uso normal por parte de pasajeros adultos o el uso del sistema LATCH para asegurar los asientos de seguridad para niños. Con los asientos de seguridad para niños con los cuales el propietario del vehículo decide usar el cinturón de seguridad en lugar del sistema LATCH para asegurar el asiento de seguridad para niños, si el cinturón de seguridad no se puede bloquear para que el ensamblaje del cinturón de seguridad se pueda usar para asegurar firmemente el asiento de seguridad para niños, existe un mayor riesgo de lesiones en un choque para el pasajero que va en el asiento de seguridad para niños. ¿Qué vamos a hacer? Para corregir este incumplimiento, su concesionaria autorizada Volkswagen inspeccionará y, en caso necesario, remplazará uno o los dos cinturones de seguridad de los asientos traseros que están al lado de las ventanillas. Este trabajo tardará hasta una hora y se realizará de forma gratuita. Tenga en cuenta que su concesionaria puede necesitar más tiempo para preparar la reparación, así como para adaptar el cronograma diario del taller. Formulario número F_3.4_AHQ-GQO-CP-C_060 Rev.3.0 69CQ USA IMPORTANTE LLAMADO A REVISIÓN POR SEGURIDAD ¿Qué debe hacer usted? Comuníquese de inmediato con su concesionaria autorizada Volkswagen para programar esta reparación por llamado a revisión. Para programar una cita en línea, visite www.vw.com/find-a-dealer. Vehículos en arrendamiento y cambios de dirección Si usted es el arrendador y propietario registrado del vehículo que se identifica en esta acción, la ley requiere que le reenvíe esta carta inmediatamente por first-class mail al arrendatario en un plazo de diez (10) días a partir de que la reciba. Si cambió de dirección o vendió el vehículo, llene la tarjeta prepagada de respuesta del propietario que se adjunta a esta carta y envíenosla por correo para poder actualizar nuestros registros. ¿Hay algo más en lo que le podamos ayudar? Si su concesionaria autorizada Volkswagen no logra o no puede completar este trabajo de forma gratuita en un plazo razonable, o si usted tiene alguna pregunta acerca de este comunicado, comuníquese con nosotros por el medio de comunicación de su preferencia en www.vw.com/contact o llamándonos al 800-893-5298. Verificar si hay alguna campaña de servicio y llamado a revisión vigente relacionada con su vehículo Para verificar la elegibilidad de su vehículo para reparación de conformidad con esta o cualquier otra campaña de servicio o llamado a revisión, visite www.vw.com/owners/recalls e ingrese su Número de identificación del vehículo (VIN) en la herramienta de búsqueda de campañas de servicio o llamado a revisión. Si aún no queda satisfecho, puede presentar una queja ante: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; o puede llamar a la línea directa sin costo sobre seguridad de los vehículos al 1-888-327-4236 (TTY: 1-800-424-9153); o puede visitar la página https://www.safercar.gov. Lamentamos cualquier inconveniente que este asunto le pueda ocasionar; sin embargo, tomamos esta medida para ayudar a garantizar su seguridad y satisfacción continua con el vehículo. Atentamente, Protección al cliente de Volkswagen
SEOCONTENT-END
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
VOLKSWAGEN | ID.4 | 2021 |
8 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-21V607-5654.PDF 215.749KB
Recall Acknowledgement
RCAK-21V607-1687.pdf 645.297KB
Remedy Instructions and TSB
RCRIT-21V607-2522.pdf 588.362KB
Manufacturer Notices(to Dealers,etc) – VOLKSWAGEN Date: August 12, 2021 Repair Available Compliance Recall 69CQ / Rear Outboard Seat Belts
RCMN-21V607-0765.pdf 760.933KB
ISSUED Owner Notification Letter(Part 577) – 69CQ_ VW Customer PRI
RCONL-21V607-2471.pdf 554.733KB
ISSUED Owner Notification Letter(Part 577) – 69CQ_ VW Customer
RCONL-21V607-4468.pdf 280.78KB
Recall Quarterly Report #1, 2021-3
RCLQRT-21V607-3934.PDF 211.159KB
Recall Quarterly Report #2, 2021-4
RCLQRT-21V607-2380.PDF 211.262KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V607&docType=RCL
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset and EPB service functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- 🚌【ABS OBD2 SCANNER】:The FX2000 diagnostic scanner for all vehicles can read and clear the Diagnostic Trouble Codes (DTC) data stream transmitted from the ABS. By retrieving the ABS code data, the obd scanner can check the various brake components and accurately diagnose problems.
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- SIMPLIFYING CAR REPAIR - Our goal is to simplify your car repair process. Our device turns your smartphone into a powerful OBD2 scanner diagnostic tool, allowing you to quickly understand your vehicle's problem, view recommended fixes, and purchase the necessary parts for repair.
- EXPERIENCE PROFESSIONAL DIAGNOSTICS - BLCKTEC's enhanced vehicle diagnostics gives you access to advanced features typically found only on high-end scanners. With our car code reader you can read and clear engine codes, ABS (brakes), SRS (airbags), TPMS codes, and many more.
- RELIABLE AND ACCURATE RESULTS - Our car scanner utilizes the latest OBD2 technology to provide accurate and reliable diagnostic information, ensuring that you can trust the results you receive.
- COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Our bluetooth OBD2 scanner works with most vehicles made after 1996, including cars, trucks, and SUVs, making it a versatile tool for any DIYer.
- USER-FRIENDLY APP - Our accompanying app is easy to use and navigate, with clear and concise information displayed in an easy-to-understand format. Available on IOS and Android.
- ABS/SRS OBD2 Scanner > Enjoy this ABS OBD2 code reader to reveal exact issues underlying in your brake, airbag, and engine systems, test individual ABS/SRS sensors, valves, or solenoids to quickly locate malfunctions (compatible with GM, Nissan, Fiat, Benz, Volvo, Land Rover, BMW, USA Ford, please reach us for details.), making sure critical safety systems work in perfect harmony together against accidents to be safe than sorry. NOTE: Only support upgrade on windows.
- 3 Most Needed Service Functions > This OBD2 scanner guides you through step by step procedures to reset oil service light and programmed mileage intervals for engine efficiency (Oil Reset); to calibrate steering wheel position for vehicle’s traveling in a straight line (SAS Reset); to clear the original low battery fault information against coming battery failures or damage (BMS Reset); saving your needless visits to mechanics. NOTE: Not suitable for all models, please reach us for compatibility.
- Full OBD2 Diagnostics > Say goodbye to the hassle of manual check-ups via this srs code reader. Quickly correct Check Engine Light warning on most OBD2/CAN compatible vehicles. Easily access to your smog status with one simple click I/M Readiness; and being filled with features for live data readings, freeze frame data, plus EVAP system, onboard monitor test means this scan tool checks all daily car care boxes.
- Work Easier > Red-Yellow-Green LEDs in this OBD2 scanner quickly show the overall DTC status without toggling through menu selections. HELP hotkey takes you directly to detailed descriptions/tips. Read/Erase DTC, I/M readiness shortcuts are added for optimized operation, along with DTC Lookup library for interpreting codes, designing the SRS OBD2 code reader a pleasure to use right out of the package even for beginners.
- Helpful Service > Get instant, free lifetime access to the most recent updates to add new car models and troubleshooting bugs making the OBD2 scanner a long-term investment for any home mechanics. The extended 1 years of quality assurance sweetens the worry-free deal even further. Multilingual Menu: EN, FR, ES, DE, IT, RU, PT, and JP. NOTE: Only support upgrade on windows.
- 【Multi-Function OBD2 Scanner】GODIAG GD203 code reader is a cost-effective products for your vehicle maintenance. This obd2 scanner does not only professional in checking the ABS/SRS systems, but also do a lot of special reset functions like Anti-lock Brake Reset, Electronic Park Brake Reset, Diesel Particulate Filter Reset, Oil Service Light Reset, TPMS, TPS/TBA, etc.
- 【ABS Bleeding Scan Tool】When the vehicle has replaced the ABS computer/ABS pump, replacing the brake master cylinder, brake cylinder, brake pipeline, and brake fluid, there may be air in the Car's ABS system. Our car diagnostic scanner can help you check for ABS bleeding, which you should perform the ABS bleeding to bleed the brake system to restore ABS braking sensitivity.
- 【ABS SRS Scan Tool】The function of airbags is to reduce the degree of injury to the people in the event of a vehicle collision. You need to check frequently whether the ABS SRS is functioning properly. Our code reader can help you find common airbag problems easily include: malfunctioning airbags, disconnected airbag wiring, and damaged airbag sensors.
- 【Oil Light Reset, EPA, SAS】If the brake pads are damaged, the brake pads should be replaced, and the brake pads need to be reset at the same time. When your car replaces the steering angle position sensor, the steering angle needs to be reset to find the relative zero where the car keeps driving straight. The oil light reset is required when the car oil or the mechanical parts that monitor oil life are replaced. Our obd2 scanner can do these jobs very well!
- 【Support 17 Languages and Multiple Car Models】Supported languages include English, Spanish, German, French, Portuguese, Swedish, Italian, Simplified Chinese, Traditional Chinese, Russian, Japanese, Korean, Hungarian, Thai, Slovak, Dutch and Polish. This is a car scanner tool for ABS and SRS systems that supports most types of cars on the market. (Please Note: 28 special functions are excluded!)
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
Last update on 2024-03-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.