| “This site contains affiliate links for which OEMDTC may be compensated” |
June 5, 2019 NHTSA CAMPAIGN NUMBER: 19V415000
Passenger Seat Improperly Manufactured
A failure of the seat track rivet increases the risk of injury during a crash.
NHTSA Campaign Number: 19V415
Manufacturer Volkswagen Group of America, Inc.
Components
Potential Number of Units Affected 66
Summary
Volkswagen Group of America, Inc. (Audi) is recalling certain 2019 Audi A8 vehicles equipped with rear relaxation seats. The front passenger seat track rivet may fail and cause the spindle bracket to separate.
Remedy
Audi will notify owners, and dealers will replace the passenger seat tracks, free of charge. The recall began July 25, 2019. Owners may contact Volkswagen customer service at 1-800-253-2834. Audi’s number for this recall is 72J3.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Audi has a Recall
Safety Recall
Code: 72J3
| Subject | Front Passenger Seat Tracks | |||||||||||||||||
| Release Date | July 18, 2019 | |||||||||||||||||
| Affected Vehicles | U.S.A.: Certain 2019 MY Audi A8
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign inquiry & verification source.
|
|||||||||||||||||
| Problem Description | The rivet connection on the front passenger seat track may fail in a frontal crash due to a spindle bracket separating from the rivet joint. In the event of a crash, the occupant in the passenger seat has an increased risk of injury. | |||||||||||||||||
| Corrective Action | Replace the front passenger seat tracks. | |||||||||||||||||
| Parts Information |
VIN Lookup Tool (right click to open): |
|||||||||||||||||
| Code Visibility | On or about July 18, 2019, affected vehicles will be listed on the Inventory Vehicle Open Campaign Action report under My Dealership Reports (found on www.accessaudi.com & OMD Web). A list will not be posted for dealers who do not have any affected vehicles.
On or about July 18, 2019, this campaign code will show open on affected vehicles in Elsa. On or about July 18, 2019, affected vehicles will be identified with this campaign code in the VIN Lookup tool at www.audiusa.com and on the NHTSA VIN lookup tool at www.safercar.gov. |
|||||||||||||||||
| Owner Notification | Owner notification will take place in July 2019. Owner letter examples are included in this bulletin for your reference. | |||||||||||||||||
| Additional Information | Please alert everyone in your dealership about this action, including Sales, Service, Parts and Accounting personnel. Contact Warranty if you have any questions.
IMPORTANT REMINDER ON VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. Dealers must ensure that every affected inventory vehicle has this campaign completed before delivery to consumers. |
|||||||||||||||||
| Claim Entry Instructions
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order. If customer refused campaign work:
|
||||||||||||||||||
| Service Number | 72J3 | |||||||||||||||||
| Damage Code | 0099 | |||||||||||||||||
| Parts Vendor Code | 002 | |||||||||||||||||
| Claim Type | Sold vehicle: 7 10
Unsold vehicle: 7 90 |
|||||||||||||||||
| Causal Indicator | Mark lower seat frame tracks as causal part* | |||||||||||||||||
| Vehicle Wash/Loaner | Do not claim wash/loaner under this action | |||||||||||||||||
| Criteria I.D. | 01 | |||||||||||||||||
| Replace the front passenger seat tracks.
Labor operation: 7273 55 99 125 T.U.
|
||||||||||||||||||
Customer Letter Example (USA)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <VIN>
NHTSA: 19V415
Subject: Safety Recall 72J3 – Front Passenger Seat Tracks
Certain 2019 Model Year Audi A8
Dear Audi Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Audi has decided that a defect, which relates to motor vehicle safety, exists in certain 2019 model year Audi A8 vehicles. Our records show that you are the owner of a vehicle affected by this action.
| What is the issue? | The rivet connection on the front passenger seat track may fail in a frontal crash due to a spindle bracket separating from the rivet joint. In the event of a crash, the occupant in the passenger seat has an increased risk of injury. |
| What will we do? | To correct this defect, your authorized Audi dealer will replace the front passenger seat tracks. This work will take about two hours to complete and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule. |
| What should you do? | Please contact your authorized Audi dealer without delay to schedule this recall repair. For your convenience, you can also visit www.audiusa.com and click on the “Find a Dealer” link to locate a dealer near you and schedule this service. |
| Lease vehicles and address changes | If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card and mail it to us so we can update our records. |
| Can we assist you further? | If your authorized Audi dealer fails or is unable to complete this work free of charge within a reasonable time, please contact Audi Customer Experience at 1-800-253-2834 or via our “Contact Us” page at www.audiusa.com. |
| Checking your vehicle for open Recalls and Service Campaigns | To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit the Recall/Service Campaign Lookup tool at www.audiusa.com and enter your Vehicle Identification Number (VIN). |
If you still cannot obtain satisfaction, you may file a complaint with: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Audi Customer Protection
SEOCONTENT-START
Campaign Work Procedure 72J3 Safety Recall
NOTE
• These repair instructions may differ from the labor operations and labor times listed in ELSA.
• Damages resulting from improper repair or failure to follow these work instructions are the dealer’s responsibility and are not eligible for reimbursement under this action.
• This procedure must be read in its entirety prior to performing the repair.
• Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not identically match all affected vehicles.
• Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
• When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate inside the shop to avoid temperature-related component damage/breakage.
Repair Overview
• Replace passenger front seat frame tracks <1>.
Required Parts
Criteria
Quantity
Part Number
Part Description
01
1
4N1.881.184
Lower seat frame tracks
1
4N0.898.028
Repair kit
NOTE
The specified part numbers reflect the status at the start of this recall. Interim updates made in ETKA can cause a listed part number to become unavailable. In this case, the new part number specified in ETKA should be used.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 6 of 19
Required Tools
Trim Removal Wedge
-3409-
(or equivalent)
Universal Vehicle Protector
-VAS871001-
(or equivalent)
Torque Wrench 1783 2-10Nm
-VAG1783-
(or equivalent)
Torque Wrench 5-50Nm
-VAG1331-
(or equivalent)
Torque Wrench 40-200 Nm
-VAG1332-
(or equivalent)
Scraper Set
-VAS6845-
(or equivalent)
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 7 of 19
Repair Instruction
Section A – Check for Previous Repair
• Enter the VIN in Elsa and proceed to the “Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a copy with the repair order.
• Confirm the Campaign/Action is open <arrow 1>. If the status is closed, no further work is required.
• Note the Applicable Criteria ID <arrow 2> for use in determining the correct work to be done and corresponding parts associated.
Proceed to Section B
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 8 of 19
Section B – Repair Procedure
WARNING
Risk of injury. Refer to “Warning and Safety Precautions”, found in Appendix A at the end of this document.
Remove belt end fitting:
• Move the passenger front seat all the way forward and up.
• Unclip the seat belt outlet trim <1> in direction of <arrow> by hand or using the scraper from the -VAS6845-.
CAUTION
Risk of damaging the spring on the belt end fitting due to improper handling.
• Move the spring just far enough until it is possible to release the tab on the spring.
• DO NOT bend the spring.
• Release the spring catches <2> by inserting a small flat-head screwdriver in the opening in the spring.
• Push the belt end fitting <1> downward in direction of <arrow> and disengage from the pin <3>.
• Guide out the belt end fitting upward through the seat belt guide under the seat side trim.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 9 of 19
Remove spindle covers and seat rail bolts:
• Remove the left and right rear spindle covers <A> using the -3409- or a small flat-head screwdriver in direction of <arrow>.
• Remove seat bolts <3 and 4>.
• Move the seat all the way to the rear and then into its lowest position.
• Remove the left and right front spindle covers <B> using the -3409- or a small flat-head screwdriver in direction of <arrow>.
• Remove seat bolts <1 and 2>.
Disengage crash hook:
• Disengage the crash hook <1> from the adapter rail <2> by sliding the reclining seat back <arrow> and raising it.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 10 of 19
Remove front passenger seat:
CAUTION
Risk of Injury
• Pyrotechnical components can deploy unintentionally.
• Discharge static electricity by briefly touching the door striker.
• Before disconnecting the power supply to the seat, move the seat to the center position and as high as it will go, ensuring that both the seat and the head restraint are vertical. Check whether the seat position sensor is accessible and can be removed later.
• Disconnect the connectors on the connector station in the floor.
• To protect the sill panel before removing the front seat, attach the -VAS871001-.
• Remove the front seat from the vehicle with a second technician.
Remove front and rear seat rail covers (tunnel side):
• Insert a flat-head screwdriver between the cover <1> and the seat rail.
• Release the tabs from the seat rail by raising the cover <1> slightly at the side using the flat-head screwdriver <arrows A> and remove it from the seat rail <arrow B>.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 11 of 19
Remove front and rear seat rail covers (sill side):
• Insert a flat-head screwdriver between the cover <1> and the seat rail.
• Release the tabs from the seat rail by raising the cover <1> slightly at the side using the flat-head screwdriver <arrows A> and remove it from the seat rail <arrow B>.
• Release the retainer <2> and remove the cover from the seat rail.
Remove upper center seat rail cover:
• The seat must be in its highest position.
• Remove the expanding clip <arrow A> on the upper center seat rail cover.
• Release the rear hook <2> on the inside of the seat rail and lift the rear cover slightly <arrow B>.
• Disengage the upper center seat rail cover <1> at the hook <3> by sliding it in the direction of travel <arrow C> and remove.
Remove lower center seat rail cover:
• Disengage the seat rail cover <1> at the upper edge of the outer side of the seat rail <arrows>.
• Detach and remove the seat rail cover.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 12 of 19
Remove seat position sensor:
• Remove the bolt <1>.
• Unclip the seat position sensor <2> from the seat pan lower frame and disengage it.
Unclip wiring from lower seat frame:
TIP
Take photos of the wire positioning and routing to reference during reinstallation.
• Unclip the wire bracket <arrows A> for routing the wires using a flat-head screwdriver.
• Disconnect the connector <arrow B> from the seat forward/back adjustment motor.
• Support the seat pan upper frame with the backrest, so that it does not fall or get damaged when disconnecting it from the lower frame.
Remove crash catch bolt:
• Remove the crash catch bolt <arrow> on the sill side and remove with the sleeve <1>.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 13 of 19
Remove sill side bolts:
• Remove the front and rear bolts <arrows>.
Remove tunnel side bolt:
• Loosen the bolt <arrow> on the tunnel side and remove.
Remove tunnel side bolts:
• Remove the front and rear bolts <arrows> on the tunnel side.
• Remove the lower frame from the seat pan upper frame.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 14 of 19
Install new lower frame in reverse order of removal:
• The new seat frame comes with transportation bolts installed in the locations indicated in the chart below. Remove these bolts and use new bolts from the repair kit.
• Start all bolts by hand first.
• Install new bolts from repair kit and torque bolts according to the following chart:
Pos.
Torque
Bolt Image
1, 2, 3
24 Nm
4
60 Nm
5
24 Nm
6
24 Nm
NOTE
Seat cushion and backrest shown removed for clarity. The seat cushion and backrest do not require removal.
• Torque bolt <arrow> on tunnel side of seat frame to 24 Nm + 4 Nm.
NOTE
This bolt comes pre-installed on the seat frame.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 15 of 19
Reinstall wiring:
• Installation is the reverse order of removal.
Seat installation:
CAUTION
Risk of Injury
• Pyrotechnical components can deploy unintentionally.
• Discharge static electricity by briefly touching the door striker.
• Install seat frame rail covers in the reverse order of removal.
• To protect the sill panel before installing seat, attach the -VAS871001-.
• Install seat in the vehicle with the help of a second technician.
Install seat position sensor:
• When delivered, the new seat rail for the reclining seat is not in the correct position to fit the seat position sensor.
• First position the fully assembled seat in the vehicle and plug in electrical connectors.
• Then move seat to correct position and install seat position sensor.
• Erase event memory with vehicle diagnostic tester in Guided Functions mode.
• Installation of the sensor is the reverse order of removal.
• Torque bolt <1> to 1.2 Nm.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 16 of 19
Engage crash hook:
• Align the seat and engage the crash hook <1> into the adapter rail <2>.
Install seat bolts:
• Install bolts <1 and 2> and torque to 40 Nm.
• Install spindle covers in the reverse order of removal.
• Move seat all the way forward.
• Install bolts <3 and 4> and torque to 40 Nm.
• Install spindle covers in the reverse order of removal.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 17 of 19
Install belt end fitting:
• Installation is the reverse order of removal.
Proceed to Section C.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 18 of 19
Section C – Campaign Completion Stamp
Item#: AUD4927ENG
-OR-
Item # AUD4927FRE
• Once the campaign has been completed, the technician should stamp the repair order.
• Stamps are available for ordering through the Compliance Label Ordering Portal.
• Proceed to Section D.
Section D – Parts Return/Disposal
Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S. and the Part Destruction and Core Disposition Report for Canada.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2019 Audi of America, Inc. All Rights Reserved.
July 2019 72J3 Page 19 of 19
Appendix A – Warning and Safety Precautions
WARNING
General Safety Precautions when Working with Pyrotechnic Components:
• Pyrotechnic components always contain propellant that generates a gas during combustion. In some components, there is also a supply of pressurized gas to ensure this gas is generated
• This pressurized gas is stored under high pressure in a compressed gas container. Pyrotechnic components are triggered by electrical/mechanical igniters.
• Only trained personnel should perform testing, assembly and servicing work. Airbags do not have a replacement interval.
• Never check with test lamps, voltmeter or ohmmeters.
• Only check pyrotechnic components when they are installed in the vehicle using vehicle diagnosis, testing and information systems approved by the manufacturer.
• When replacing pyrotechnic components and the airbag control module, disconnect the battery ground strap while the ignition is switched on. Then cover the negative terminal.
• Wait 10 seconds after disconnecting the battery.
• The ignition must be SWITCHED ON when connecting the battery. There should not be anyone inside the vehicle when doing this.
• Exception: vehicles with batteries in the passenger compartment. In this case, stay outside the range of the airbags and seat belts.
• Wash your hands after touching ignited pyrotechnic components from the restraint system.
• Do not open or repair pyrotechnic components. Use only new components to reduce the risk of injury.
• Do not install pyrotechnic components that have fallen onto a hard surface or show signs of damage.
• Discharge static electricity before handling pyrotechnic components, for example before disconnecting the electrical connector. This can be done by touching grounded metal objects such as the door striker pin.
• Install pyrotechnic components immediately after removing them from their transport packaging. If you must stop working, store the pyrotechnic component in its original transport packaging.
• Do not leave pyrotechnic components lying in the open unattended.
• Do not treat pyrotechnic components with grease, cleaning solutions or similar products.
• Do not expose pyrotechnic components to temperatures above 100 ºC, even for brief periods of time.
• People in the immediate vicinity of the workplace must be protected from possible noise and projectiles.
• Pyrotechnic components can trigger unintentionally.
• In the event of deployment:
o Single-stage inflators: allow airbag to cool down completely. Wait at least 10 minutes before handling.
o Two-stage inflators: wait for second airbag ignition. Allow airbag to cool down completely. Wait at least 10 minutes before handling.
SEOCONTENT-END
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| AUDI | A8 | 2019 |
11 Associated Documents
Manufacturer Notices(to Dealers,etc) – Date: June 26, 2019 Advance Notice – Safety Recall 72J3 / Front Passenger Seat Tracks
Loading...
Reload document 
Open in new tab
Recall 573 Report-Amendment 1
RCLRPT-19V415-4195.PDF 215.128KB
Loading...
Defect Notice 573 Report
RCLRPT-19V415-8687.PDF 215.127KB
Loading...
Recall Acknowledgement
RCAK-19V415-3344.pdf 244.094KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-19V415-3012.pdf 41.499KB
Loading...
Manufacturer Notices(to Dealers,etc) – Audi Date: July 17, 2019 Repair Available – Safety Recall 72J3 / Front Passenger Seat Tracks
Loading...
Recall Quarterly Report #1, 2019-3
RCLQRT-19V415-2079.PDF 211.138KB
Loading...
Recall Quarterly Report #2, 2019-4
RCLQRT-19V415-7816.PDF 211.242KB
Loading...
ISSUED Owner Notification Letter(Part 577) – PRI
RCONL-19V415-6132.pdf 56.524KB
Loading...
Remedy Instructions and TSB
RCRIT-19V415-0111.pdf 1302.927KB
Loading...
Miscellaneous Document – Adient Single Purchaser Document
RMISC-19V415-5252.pdf 53.852KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V415&docType=RCL
- Simple & Non-Toxic - Condition & protect in one simple step to maintain any finished leather surface
- Use On - Use regularly on accessories such as leather, purses, shoes, boots, briefcases & handbags
- Protect - UVX - Sunscreen protects all types of leather from sun damage, fading, drying & cracking
- Restore - Safely removes dirt, soil & residue to soften, strengthen & moisturize neglected leather
- Recommended - Finished leather surfaces including car interior shoes boots briefcases handbags & coats
- Non-toxic, Gentle Cleaner: Our proven, rejuvenating formula is a powerful, fragrance-free cleaner ideal for all your leather goods. EPA Safer Choice certified
- Clean All Types of Leather: Quickly and gently removes dirt, oil, tough stains and grime from car seats, truck seats, upholstery, furniture, handbags, purses, shoes, accessories, saddles, and tack. Effectively cleans leather of all colors, including white leather. Safe for exotic leather, faux, vinyl
- Safe for You, Safe for Leather: Made with non-toxic, high-quality ingredients that makes your leather last longer. Safe for people, pets & your leather
- Test & Apply: Apply leather cleaner with a lint-free cloth. No need to scrub or rub — simply wipe down and allow it to dry. Spot test on each leather item first. Not for use on suede
- American Made Since 1968: Our premium leather care formulas have had a cult following among leather experts, retailers and high-end car and furniture makers and enthusiasts for over 50 years.
- KEEP IT CLEAN: Chemical Guys Leather Cleaner Keeps your leather seats and accessories clean with ; the gentle formula removes dirt, grease, body oils, sweat from all types of fine natural leather, durable sealed leather, and synthetic leather materials
- PH BALANCED: Leather Cleaner is pH balanced for the most efficient cleaning and preserves the leather's strength, durability and appearance; penetrates the pores of leather to lift and suspend dirt and oils
- DRY-TO-THE-TOUCH FORMULA: Simply mist Leather Cleaner directly onto the leather piece or into a cleaning towel, then buff dry with a fresh microfiber towel; Water-based surfactants cleans and removes dirt, dust, and body oils, leaving no residue
- IT'S NOT JUST FOR CAR SEATS & INTERIORS: Leather Cleaner works on all things leather, seats, interiors, jackets, shoes, boots, couches, purses, bags and more; Everyone has something leather in their home
- FAST, EASY & FUN: No one "loves to clean", but if you are using products that make it fast and easy, it's certainly more fun; Leather Cleaner is a gentle cleanser that removes dirt, grease, body oils, sweat, food residue, and light stains from fine natural leather, durable sealed leather, and synthetic leather materials like suede
- NOT JUST FOR AUTO CARE - The Leather Cleaner & Conditioner Kit is the perfect one-two punch to restoring leather - interiors, jackets, shoes, purses, furniture and more; everyone has something leather in their home, keep it looking & smelling it’s best.
- THE PERFECT COMBO - Cleaning and conditioning is crucial for leather to look its best: old leather dries out, cracks, and fades; dirty leather shines from body oil; when cleaned & conditioned, leather feels smooth & silky, and smells fresh and luxurious.
- CLEAN, THEN CONDITION - Leather Cleaner is pH balance, colorless and odorless; it penetrates the pores in leather to remove dirt and oils; Leather Conditioner, has a subtle leather scent & Vitamin E nourishes leather and helps reduce daily damage.
- MADE IN AMERICA – Leather Cleaner and Conditioner are proudly produced in the USA. We celebrate the happiness of clean cars each day in our Southern California headquarters as well as our Detail Garage retail store locations throughout the country.
- THE GO TO BRAND IN CAR CARE - Car lovers choose Chemical Guys, not only for the finest car care products, but the world class customer support and vast detailing knowledge Chemical Guys is more than a brand it's a lifestyle with a worldwide following.
- BRING YOUR LEATHER BACK TO LIFE: Safely remove dirt, soil & residue to soften; strengthen & moisturize neglected leather.
- EASY TO USE WIPES: Our multi-action formula conditions & protects in one simple step to maintain and restore any finished leather surface
- MULTIPLE USES: Use regularly on accessories such as leather; purses; shoes; boots; briefcases & handbags; Condition leather sofas; couches and chairs to restore their beauty and suppleness.
- UVX PROTECTION: Weiman Leather Conditioner contains UVX-15 sunscreen which protects all types of leather from sun damage; fading; drying & cracking
- CARE FOR YOUR AUTO INTERIOR: Perfect for cleaning; protecting and restoring your car; SUV; truck; motorcycle or Jeep seats and interior.
- This leather care kit includes one 16.9 oz bottle of Lexol All Leather Cleaner, one 16.9 oz bottle of Lexol All Leather Conditioner, and two application sponges
- The pH-balanced leather cleaner gently lifts away dirt and oil, while the leather conditioner restores a soft, supply feel to a variety of leather surfaces
- The perfect leather cleaner and conditioner for car seats; goes beyond auto care to prolong the life of all your finished leather investments
- Try it as a leather couch cleaner and conditioner or on other leather furniture; can also be used as a leather boot care kit, leather jacket cleaner and conditioner, baseball glove conditoner, and more
- Start with the cleaner, then follow with the conditioner to safely restore and protect your leather goods
- Keep Prized Leather Goods Pristine: Many of our most prized possessions are crafted from quality leather, keeping them in good condition is vital. Whether you want to prolong the life of leather boots, handbags, car seats, saddles/tack, sofas, or other cherished items—count on Leather CPR to provide the deep cleaning & conditioning necessary for a lifetime of beauty & durability. Leather CPR—the ultimate premium treatment for your valuable leather goods.
- Fast & Simple One-Step Process: Saving time is always welcome. Pair it with an excellent end result and it’s truly rewarding. Our premium blend for leather care both cleans and conditions in one easy step to keep your leather products soft & supple for years of enjoyment. No need to waste energy, money, & hours on a multiple-stage process of soaking your leather with a watery-spray, waiting, then applying a sticky conditioner. Leather CPR delivers unparalleled results you’ll see, feel, and love.
- You Deserve A Safe, Tested Leather Formula: There is a vast array of leather care products on the market, most of them made from industrial chemicals. None of them are made with 100% cosmetic ingredients found in top skin care products, or dermatologist tested like Leather CPR. Our unique formulation preserves leather beautifully—with a solution that’s gentle enough for everyone who touches it. Rest assured, both your leather items & your skin are carefully protected.
- Improve Appearance & Longevity Beyond Expectations: Users are amazed by their fast Leather CPR results—especially after being so underwhelmed by other leather cleaners & conditioners on the market. From the first application, they delight in how quickly scratches & scuffs blend away to reveal a supple gorgeously restored surface. Our deeply moisturizing cream dries in minutes without sticky or greasy residue. The effects are lasting, prolonging the life of your leather for years.
- CPR Cleaning Products Outperforms For You: It was a simple mission when our CPR team set out to fill a void in the cleaning product industry...if we can’t make a product that outperforms our competitors, then we won't bother. Nothing mediocre is accepted. That’s why our formulas have been embraced by high-end retailers, car makers, & other leather aficionados worldwide for over two decades. Bring home your own bottle of Leather CPR—and contact us if you ever have questions about CPR products.
- BRING YOUR LEATHER BACK TO LIFE: Safely remove dirt, soil & residue to soften, strengthen & moisturize neglected leather.
- EASY TO USE FORMULA: Our multi-action formula conditions & protects in one simple step to maintain and restore any finished leather surface
- MULTIPLE USES: Use regularly on accessories such as leather, purses, shoes, boots, briefcases & handbags. Condition leather sofas, couches, and chairs to restore their beauty and suppleness.
- UVX PROTECTION: Weiman Leather Conditioner contains UVX-15 sunscreen which protects all types of leather from sun damage, fading, drying & cracking
- CARE FOR YOUR AUTO INTERIOR: Perfect for cleaning, protecting, and restoring your car, SUV, truck, motorcycle or Jeep seats and interior.
- BRING YOUR LEATHER BACK TO LIFE: Safely remove dirt, soil & residue to soften, strengthen & moisturize neglected leather.
- EASY TO USE FORMULA: Our multi-action formula conditions & protects in one simple step to maintain and restore any finished leather surface
- MULTIPLE USES: Use regularly on accessories such as leather, purses, shoes, boots, briefcases & handbags. Condition leather sofas, couches, and chairs to restore their beauty and suppleness.
- UVX PROTECTION: Weiman Leather Conditioner contains UVX-15 sunscreen which protects all types of leather from sun damage, fading, drying & cracking
- CARE FOR YOUR AUTO INTERIOR: Perfect for cleaning, protecting, and restoring your car, SUV, truck, motorcycle or Jeep seats and interior.
- Easily clean and condition leather to renew its appearance and prolong suppleness with this 2-step Lexol Leather Regimen Kit
- Kit contains: (1) 16. 9 oz. bottle of All Leather Deep Cleaner, (1) 16. 9 oz. bottle of All Leather Deep Conditioner, and 2 Premium Applicator Sponges
- Cleaner restores and revives leather by lifting dirt and oils, allowing them to be easily wiped away
- Conditioner contains fine oil droplets that nourish, restore flexibility, and protect leather against cracking without leaving greasy residue
- Easy-to-use cap dispenses the right amount of product for car interior, leather furniture, briefcases, shoes, jackets, baseball gloves, and softball gloves
Last update on 2024-04-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.