“This site contains affiliate links for which OEMDTC may be compensated” |
December 9, 2020 NHTSA CAMPAIGN NUMBER: 20V760000
Terminal Cover Can Compromise 12-Volt Power Supply
In the event of a rear crash, the incorrect cover can cause the 12-volt power supply to be compromised, preventing the vehicle doors from being opened from the outside, or the hazard warning lights from functioning, increasing risk of injury.
NHTSA Campaign Number: 20V760
Manufacturer Volkswagen Group of America, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 2,355
Summary
Volkswagen Group of America, Inc. (Audi) is recalling certain 2018-2019 Audi RS5 Coupe vehicles. An incorrect positive battery terminal cover was installed.
Remedy
Audi will notify owners, and dealers will replace the positive terminal cover, free of charge. The recall began January 19, 2021. Owners may contact Audi customer service at 1-800-253-2834. Audi’s number for this recall is 27i6.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Audi has a Recall
Problem Description
The affected vehicles were erroneously equipped with a plus (positive) terminal cover that might be less capable of assuring 12 V-power supply in a rear crash according to FMVSS and CMVSS 301 (Fuel system integrity) at 80 km/h (approximately 50 mph). In case of a rear crash (according to FMVSS/CMVSS 301 at 80 km/h (approximately 50 mph)) it may be possible for the 12-volt power supply of the vehicle to become compromised.
While there is no noncompliance with FMVSS/CMVSS 301, this could result in not being possible to open the vehicle doors from the outside, or the hazard warning lights may not function due to a compromised electric power supply. This may lead to an increased risk of injury to vehicle occupants in a rear crash if the power supply is affected.
Corrective Action
Replace the plus (positive) terminal cover.
Code Visibility
On or about January 12, 2021, the campaign code will be applied to affected vehicles.
Owner Notification
Owner notification will take place in January 2021. Owner letter examples are included in this bulletin for your reference.
Repair Overview
Replace positive battery terminal cover.
Repair Procedure
- Access the battery.
- Remove positive battery terminal cover <1>.
- Install new positive battery terminal cover <arrow>.
- Ensure the cover is clipped in and secured.
SEOCONTENT-START
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 1 of 9
Safety Recall
Code: 27i6
Subject
Terminal Cover
Release Date
January 12, 2021
Affected Vehicles
Country
Beginning Model Year
Ending Model Year
Vehicle
Vehicle Count
USA
2018
2019
RS5 COUPE
2,355
CAN
2018
2019
RS5 COUPE
447
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign inquiry & verification source.
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at the same time the vehicle is in the workshop for this campaign.
Problem Description
The affected vehicles were erroneously equipped with a plus (positive) terminal cover that might be less capable of assuring 12 V-power supply in a rear crash according to FMVSS and CMVSS 301 (Fuel system integrity) at 80 km/h (approximately 50 mph). In case of a rear crash (according to FMVSS/CMVSS 301 at 80 km/h (approximately 50 mph)) it may be possible for the 12-volt power supply of the vehicle to become compromised.
While there is no noncompliance with FMVSS/CMVSS 301, this could result in not being possible to open the vehicle doors from the outside, or the hazard warning lights may not function due to a compromised electric power supply. This may lead to an increased risk of injury to vehicle occupants in a rear crash if the power supply is affected.
Corrective Action
Replace the plus (positive) terminal cover.
Code Visibility
On or about January 12, 2021, the campaign code will be applied to affected vehicles.
Owner Notification
Owner notification will take place in January 2021. Owner letter examples are included in this bulletin for your reference.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts and Accounting personnel. Contact Warranty if you have any questions.
IMPORTANT REMINDER ON VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS
New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety.
Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied.
Dealers must ensure that every affected inventory vehicle has this campaign completed before delivery to consumers.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Audi dealer. 2021 Audi Group of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 2 of 9
Parts Information
Parts Control Type:
VIN to Order
If parts are needed to support a vehicle repair:
• US Dealers – use AVA
• CAN Dealers – contact the Parts Specialists via phone (800-767-6552), email (VWoAPartsSpecialists@vw.com), or chat/text with the VIN to order
Initial Allocation:
YES
Dealers will be sent an initial allocation prior to customer notification. If no initial allocation was received, please reference the Repair Projection Tool (below) to view your potential VIN population.
Repair Projection Tool:
(right click to open)
Criteria
Quantity
Part Number
P.O.C. Part Description
Ordering Method
01
1
8W7-915-429
Cap
VIN to Order
NOTE
The specified part numbers reflect the status at the start of this action. Interim updates made in ETKA can cause a listed part number to become unavailable. In this case, the new part number specified in ETKA should be used.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 3 of 9
Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit the request through Audi Warranty Online under the Campaigns/Update option.
Canada dealers: Upload the repair order [signed by customer] to Audi WIN/Operations/Campaign Closure.
Service Number
27i6
Damage Code
0099
Parts Vendor Code
002
Claim Type
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Mark cap* as causal part
Vehicle Wash/Loaner
Do not claim wash/loaner under this action
Criteria I.D.
01
LABOR
Labor Op
Time Units
Description
2706 49 99
30
Replace positive battery terminal cover
PARTS
Quantity
Part Number
Description
1.00
8W7915429
Cap*
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 4 of 9
Customer Letter Example (USA)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
NHTSA: 20V760
Subject: Safety Recall 27i6 – Terminal Cover
Dear Audi Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Audi has decided that a defect, which relates to motor vehicle safety, exists in certain 2018-2019 model year Audi RS5 Coupe vehicles. Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
The affected vehicles were erroneously equipped with a plus (positive) terminal cover that might be less capable of assuring 12 V-power supply in a rear crash at approximately 50 mph. In case of a rear crash, it may be possible for the 12-volt power supply of the vehicle to become compromised.
This could result in not being possible to open the vehicle doors from the outside, or the hazard warning lights may not function due to a compromised electric power supply. This may lead to an increased risk of injury to vehicle occupants in a rear crash.
What will we do?
To correct this defect, your authorized Audi dealer will replace the plus (positive) terminal cover. This work will take about half an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule.
What should you do?
Please contact your authorized Audi dealer without delay to schedule this recall repair. For your convenience, you can also visit www.audiusa.com and click on the “Find a Dealer” link to locate a dealer near you and schedule this service.
Lease vehicles and address changes
If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card and mail it to us so we can update our records.
Can we assist you further?
If your authorized Audi dealer fails or is unable to complete this work free of charge within a reasonable time, please contact Audi Customer Experience at 1-800-253-2834 or via our “Contact Us” page at www.audiusa.com.
Checking your vehicle for open Recalls and Service Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit the Recall/Service Campaign Lookup tool at www.audiusa.com and enter your Vehicle Identification Number (VIN).
If you still cannot obtain satisfaction, you may file a complaint with: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 5 of 9
Customer Letter Example (Canada)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
Transport Canada Recall: 2020-604
Subject: Safety Recall 27i6 – Terminal Cover
Dear Audi Owner,
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
The affected vehicles were erroneously equipped with a plus (positive) terminal cover that might be less capable of assuring 12 V-power supply in a rear crash according to Canadian Motor Vehicle Safety Standard (CMVSS) 301 Fuel System Integrity at 80 km/h. In case of a rear crash (according to CMVSS 301 at 80 km/h) it may be possible for the 12-volt power supply of the vehicle to become compromised.
While there is no noncompliance with CMVSS 301, this could result in not being possible to open the vehicle doors from the outside, or the hazard warning lights may not function due to a compromised electric power supply. This may lead to an increased risk of injury to vehicle occupants in a rear crash if the power supply is affected.
What will we do?
To correct this defect, your authorized Audi dealer will replace the plus (positive) terminal cover. This work will take about half an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule.
What should you do?
Please contact your authorized Audi dealer without delay to schedule this recall repair.
Lease vehicles and address changes
If you are the lessor and registered owner of the vehicle identified in this letter, you shall forward this letter (and any subsequent notice, if applicable) to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle identified in this letter, please fill out the enclosed prepaid Owner Reply Card and mail it to us so we can update our records.
Can we assist you further?
If your authorized Audi dealer fails or is unable to complete this work free of charge within a reasonable time, please contact Audi Customer Relations Monday through Friday from 8AM to 8PM EST at 1-800-822-2834 or via our “Contact Audi Canada” page at www.audi.ca.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 6 of 9
Repair Overview
• Replace positive battery terminal cover.
NOTE
• These repair instructions may differ from the labor operations and labor times listed in ELSA.
• Damages resulting from improper repair or failure to follow these work instructions are the dealer’s responsibility and are not eligible for reimbursement under this action.
• This procedure must be read in its entirety prior to performing the repair.
• Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not identically match all affected vehicles.
• Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
• When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate inside the shop to avoid temperature-related component damage/breakage.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 7 of 9
Repair Instruction
Section A – Check for Previous Repair
• Enter the VIN in Elsa and proceed to the “Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a copy with the repair order.
• Confirm the Campaign/Action is open <arrow 1>. If the status is closed, no further work is required.
• Note the Applicable Criteria ID <arrow 2> for use in determining the correct work to be done and corresponding parts associated.
CRITICAL REPAIR STEP
STOP!
If multiple software update Campaign/Actions are open, they must be performed in order of the Start date <arrow 3>. The oldest should be performed first.
• All Safety Recalls must be completed prior to completing this campaign.
• Proceed to Section B.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 8 of 9
Section B – Repair Procedure
• Access the battery.
• Remove positive battery terminal cover <1>.
• Install new positive battery terminal cover <arrow>.
• Ensure the cover is clipped in and secured.
Proceed to Section C
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2021 Audi of America, Inc. and Audi Canada. All Rights Reserved.
January 2021 27i6 Page 9 of 9
Section C – Campaign Completion Stamp
Item#: AUD4927ENG
-OR-
Item # AUD4927FRE
• Once the campaign has been completed, the technician should stamp the repair order.
• Stamps are available for ordering through the Compliance Label Ordering Portal.
Proceed to Section D
Section D – Parts Return/Disposal
Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S. and the Part Destruction and Core Disposition Report for Canada.
***************************************************************************************************************
AUDI DEALER COMMUNICATION
Ensure all dealership personnel are aware of this notice so they are able to address customer questions. Contact Warranty if you require
additional assistance. Direct press inquiries to Audi Public Relations.
Audi Customer Protection 27i6_DLR_ADV
Advance Notice – Safety Recall 27i6 / Terminal Cover
This notice is for: Dealer Principal
General Manager
Sales Managers
Service Manager
Parts Manager
Service Advisor
Warranty Administrator
Technicians
Date: December 17, 2020
Issue: The affected vehicles were erroneously equipped with a plus (positive) terminal cover
that might be less capable of assuring 12 V-power supply in a rear crash according to
FMVSS and CMVSS 301 (Fuel system integrity) at 80 km/h (approximately 50 mph). In
case of a rear crash (according to FMVSS/CMVSS 301 at 80 km/h (approximately 50
mph)) it may be possible for the 12-volt power supply of the vehicle to become
compromised.
While there is no noncompliance with FMVSS/CMVSS 301, this could result in not being
possible to open the vehicle doors from the outside, or the hazard warning lights may not
function due to a compromised electric power supply. This may lead to an increased risk
of injury to vehicle occupants in a rear crash if the power supply is affected.
Repair: REPAIR NOT YET AVAILABLE – December 18, 2020
Check daily campaign open inventory report or OMD for affected vehicles in
inventory
Affected Vehicles Country Beginning
Model Year
Ending
Model Year Vehicle Vehicle
Count
USA 2018 2019 RS5 COUPE 2,355
CAN 2018 2019 RS5 COUPE 447
*Counts reflect overall population; some vehicles may have already been repaired. Check Campaigns/Actions
screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid
campaign inquiry & verification source.
Notes:
IMPORTANT REMINDER: VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS
New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new
motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by
this notification under a sale or lease until the defect or noncompliance is remedied. By law,
dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an
applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor
vehicle safety.
Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in
their inventory which are involved in a safety or compliance recall until the defect has been
remedied.
-END OF MESSAGE
***************************************************************************************************************
AUDI DEALER COMMUNICATION
Ensure all dealership personnel are aware of this notice so they are able to address customer questions. Contact Warranty if you require
additional assistance. Direct press inquiries to Audi Public Relations.
Audi Customer Protection 27i6_DLR_LAUNCH
Form No. F_3.4_AHQ-CP-C_029 Rev. 1.0
Repair Available – Safety Recall 27i6 / Terminal Cover
This notice is for: Dealer Principal
General Manager
Sales Managers
Service Manager
Parts Manager
Service Advisor
Warranty Administrator
Technicians
Date: January 11, 2021
Issue: The affected vehicles were erroneously equipped with a plus (positive) terminal cover
that might be less capable of assuring 12 V-power supply in a rear crash according to
FMVSS and CMVSS 301 (Fuel system integrity) at 80 km/h (approximately 50 mph). In
case of a rear crash (according to FMVSS/CMVSS 301 at 80 km/h (approximately 50
mph)) it may be possible for the 12-volt power supply of the vehicle to become
compromised.
While there is no noncompliance with FMVSS/CMVSS 301, this could result in not being
possible to open the vehicle doors from the outside, or the hazard warning lights may not
function due to a compromised electric power supply. This may lead to an increased risk
of injury to vehicle occupants in a rear crash if the power supply is affected.
Repair: REPAIR AVAILABLE – January 12, 2021 – Replace the plus (positive) terminal
cover.
See ELSA/ServiceNet for complete repair & claiming instructions
Check daily campaign open inventory report or OMD for affected vehicles in
inventory
Repair every affected inventory vehicle before delivery to consumers.
Parts Department: Dealers will be sent an initial allocation prior to customer notification. If no initial
allocation was received, please reference the Repair Projection Tool to view your
potential VIN population.
Affected Vehicles Country Beginning
Model Year
Ending
Model Year Vehicle Vehicle
Count
USA 2018 2019 RS5 COUPE 2,355
CAN 2018 2019 RS5 COUPE 447
*Counts reflect overall population; some vehicles may have already been repaired. Check Campaigns/Actions
screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid
campaign inquiry & verification source.
Notes: Schedule owner repairs immediately
Owner mailing – January 2021
IMPORTANT REMINDER: VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS
New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new
motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by
this notification under a sale or lease until the defect or noncompliance is remedied. By law,
dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an
applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor
vehicle safety.
Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in
their inventory which are involved in a safety or compliance recall until the defect has been
remedied.
-END OF MESSAGE
***************************************************************************************************************
***************************************************************************************************************
SEOCONTENT-END
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
AUDI | RS5 | 2018-2019 |
10 Associated Documents
Remedy Instructions and TSB
RCRIT-20V760-3567.pdf 568.557KB
Manufacturer Notices(to Dealers,etc) – AUDI Date: December 17, 2020 Advance Notice – Safety Recall 27i6 / Terminal Cover
RCMN-20V760-6553.pdf 700.343KB
ISSUED Owner Notification Letter(Part 577) – 27i6 Audi Customer PRI
RCONL-20V760-3190.pdf 155.482KB
Recall Acknowledgement
RCAK-20V760-4160.pdf 243.972KB
Defect Notice 573 Report
RCLRPT-20V760-2755.PDF 216.126KB
ISSUED Owner Notification Letter(Part 577) – 27i6 Audi Customer
RCONL-20V760-0609.pdf 140.22KB
Recall Quarterly Report #1, 2021-1
RCLQRT-20V760-0458.PDF 211.158KB
Manufacturer Notices(to Dealers,etc) – Date: January 11, 2021 Repair Available – Safety Recall 27i6 / Terminal Cover
RCMN-20V760-1412.pdf 703.513KB
Recall Quarterly Report #2, 2021-2
RCLQRT-20V760-8292.PDF 211.26KB
Recall Quarterly Report #3, 2021-3
RCLQRT-20V760-3788.PDF 211.347KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V760&docType=RCL
- Start Dead Batteries - Safely jump start a dead battery in seconds with this compact, yet powerful, 1000-amp lithium battery jump starter - up to 20 jump starts on a single charge - and rated for gasoline engines up to 6.0-liters and diesel engines up to 3.0-liters.
- UltraSafe - Safe and easy-to-use car jumper starter and jump pack without worrying about incorrect connections or sparks. Safely connect to any 12-volt vehicle with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
- Multi-Function - It's a car jump starter, portable power bank, and LED flashlight. Recharge smartphones, tablets, and other USB devices. It's easily rechargeable from any powered USB port in 3-hours at 2.1-amps. Plus, an integrated 100-lumen LED flashlight with seven light modes, including emergency strobe and SOS.
- Advanced Design - Our most advanced car battery charger jump starter ever. Featuring high-discharge lithium technology for safe operation in any climate. A rugged and water-resistant enclosure rated at IP65. A rubberized over-molded casing to prevent scratching or marring of surfaces. And an ultra-compact and lightweight design weighing just 2.4 pounds.
- In The Box - GB40 UltraSafe Portable Car Jump Starter, Heavy Duty Booster Clamps, 12-Volt Car Charger, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, 1-Year Warranty, and Designed in the USA.
- 【 2000A CAR JUMP STARTER 】 With 2000A peak current, the car battery jump starter can easily start 12V vehicles (up to 7.0L petrol or 5.5L diesel engines) in seconds, this powerful jump start battery pack can achieve to jump car, truck, and motorcycle and SUVs in extreme temperatures (-4°F~140°F)
- 【 MORE THAN A JUMP STARTER】 Featuring a capacity of 12000mAh, the battery jumper starter portable can work as a portable power bank charging your phones, tablets, cameras, or other devices quickly during your travels
- 【 A LIFESAVER IN THE DARK 】 YR200 car jumper starter portable has 3 LED light modes (Flashlight, SOS, Strobe). In emergency, this car battery charger jump starter portable is a lifesaver in the low light when camping, picnicking, or breakdown on an adventure trip.
- 【 ROBUST COVER & IP66 WATERPROOF 】 Thanks to the robust cover, the portable car jump starter can be protected from bumps or dust. What's more, the jump box for car battery is IP66 waterproof and can even be used in rainy weather
- 【 COMPACT & EASY CARRY 】 This emergency portable jump starter adopts compact and lightweight design, measures only 5.52 *3.35*1.06in, only weighs 0.72Ib, is easy to carry on
- 【More Powerful Booster】: With a 1500A peak current, the Q10S car jump starter can start the 12V vehicles up to 7.0L Gas/5.5L Diesel engines . The battery starter is equipped with a high-performance force start function that helps you start depleted car batteries. even in extreme temperatures, The powerful lithium battery booster - up to 20 jump starts on a single charge . Suitable for car, truck, motorcycle, boat, RV or tractor and so on.
- 【Upgraded Protections】: Safe and easy-to-use jump starter battery pack without the worry of incorrect connections or sparks. Particularly spark-proof, reverse polarity protection, low-temperature protection, high-temperature protection, over-load protection. Safely connect to any 12-volt automotive car battery. The car battery jump box/jump cable indicator notifies you of incorrect use with an audible buzz and flashing lights.
- 【A Backup Power Pack】: Q10S Car Starter designed with 2 USB outputs (5V/3A)and (5V/2.1A), the quick charge 3.0 USB port can fully charge your cellphones, tablets, and other mobile devices at the fastest (up to 75% faster than a standard charger). And can power your other car accessories by using a 12V-16V/10A DC port. like tire inflators, inverters, and more.
- 【LED Flashlight 】: The battery starter has 3 LED lights modes: Flash Light, Strobe Light, and SOS Light. This multi-purpose flashlight and which comes in handy in case of an emergency and outdoor adventures.
- 【What You Get】: Portable Lithium Car Battery Jump Starter x1, Smart Jump Cable x1, USB Type-C Charging Cable x1, User Manual x1. 2-Years Technical Support. Please feel free to contact us for help if any questions.
- Start Dead Batteries - Safely jump start a dead battery in seconds with this compact, yet powerful, 2000-amp lithium battery jump starter - up to 40 jump starts on a single charge - and rated for gasoline engines up to 8.0-liters and diesel engines up to 6.0-liters.
- UltraSafe - Safe and easy-to-use car jumper starter and jump pack without worrying about incorrect connections or sparks. Safely connect to any 12-volt vehicle with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
- Multi-Function - It's a car jump starter, portable power bank, and LED flashlight. Recharge smartphones, tablets, and other USB devices. It's easily rechargeable from any powered USB port in 6-hours at 2.1-amps. An integrated 400-lumen LED flashlight with seven light modes, including emergency strobe and SOS. Plus, a 12-volt, 15-amp outport port for powering any 12VDC devices, like tire inflators, inverters and more.
- Advanced Design - Our most advanced car battery charger jump starter ever. Featuring high-discharge lithium technology for safe operation in any climate. A rugged and water-resistant enclosure rated at IP65. A rubberized over-molded casing to prevent scratching or marring of surfaces. And an ultra-compact and lightweight design weighing just 5.0 pounds.
- In The Box - GB70 UltraSafe Portable Car Jump Starter, Heavy Duty Booster Clamps, XGC Male and Female Connectors, XGC Cable, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, 1-Year Warranty, and Designed in the USA.
- X for Extreme - An all-new design with extreme jump starting power for powerful engines starts. Rated at 4250-amps, this portable lithium car battery jump starter releases maximum energy at every start. This isn't an upgrade. It's a whole new series - the Extreme Series.
- Turbo Chargeable - Boost X is equipped with USB-C technology that, combined with power delivery, gives you lightning-fast recharges. Completely recharges in just 2.7-hours, or go from 0% to jump starting in just 5-minutes of charge.
- Charge Everything - With USB-C Power Delivery, you have the power to charge almost everything. Its internal power bank provides 60-watts of power - both in and out - to effortlessly power your favorite USB-C devices, like phones, tablets, laptops, wearables, and more.
- UltraSafe 2.0 - We took our UltraSafe technology and made it better. It's still our simple, mistake-free design featuring spark-proof technology and reverse polarity protection, but with enhanced thermal efficiency and power management to provide better performance and longer battery life.
- Maximum Versatility - Boost X is one of the most versatile lithium jump starters ever. Jump start all vehicle types, including cars, motorcycles, trucks, ATVs, boats, RVs, vans, SUVs, tractors, and more for up to 10.0-liter gasoline and 8.0-liter diesel engines.
- 🚗【Powerful Battery 𝐣𝐮𝐦𝐩 𝐬𝐭𝐚𝐫𝐭𝐞𝐫s】 - With a 1600A peak current, the 59.2Wh car battery 𝐣𝐮𝐦𝐩 𝐬𝐭𝐚𝐫𝐭𝐞𝐫s can jump start most 12V vehicles up to 7.2L Gas/5.5L Diesel engines in seconds. even at -4ºF~149ºF, The powerful lithium motorcycle booster pack - up to 20 jump starts on a single charge (just over 25% of power is enough to start your car). Suitable for car, trucks, van, riding mower, motorcycle, boat, snowmobiling, ATV, RV, SUV, watercraft, yachts or tractor and so on.
- 🚗【Intelligent Protection】 - Product status is intuitively shown on a 1.3 x 0.6 inch smart screen, so you can start your car easily, Smart jumper clamps of 12v battery jump packs with safety protection including Short Circuit Protection, Over-current Protection, Reverse Polarity Protection, Over-voltage Protection, Overcharge Protection, Spark-proof Protection, Overload Protection, Over-temperature Protection, can effectively keep your battery and vehicles away from danger.
- 🚗【More than a Portable Battery 𝐣𝐮𝐦𝐩 𝐬𝐭𝐚𝐫𝐭𝐞𝐫s】 - It’s also a 16000mAh battery bank for charging cellphones , tablets, and other mobile devices at the fastest (up to 75% faster than a standard charger) and a flashlight with 3 modes: Flash Light, Strobe Light, and SOS Light. This multi-purpose flashlight and which comes in handy in case of an emergency and outdoor adventures.
- 🚗【3-IN-1 LED Flashlight】 - The portable battery jumper starters has a built-in LED flashlight with 3 modes (Lighting/Strobe/SOS) for emergency and outdoor adventures.
- 🚗【What You Get】 - Portable Lithium Car Battery 𝐣𝐮𝐦𝐩 𝐬𝐭𝐚𝐫𝐭𝐞𝐫s automotive x1, Portable Car Jumper Cable x1, Adapter x1, USB A to USB C cable x1, User Manual x1, Hard carrying case x1. Power adapter for charging x1, One year of hassle-free warranty and lifetime technical support for BOOKOO power booster 𝐣𝐮𝐦𝐩 𝐬𝐭𝐚𝐫𝐭𝐞𝐫s. Contact us anytime with any questions
- POWERFUL BOOST FUNCTION - With 2000Amp peak current this jump starter can start the car with a dead battery in seconds, up to 25 times with a single charge. Even if the battery voltage is too low (below 9V), pressing the “BOOST” button will help the engine to restart. Powrun jump starter battery pack can start up to 6.5-liter diesel and 8.0-liter gasoline engines, it is suitable for trucks, motorcycles, snowmobiles, ATVs, UTVs, and lawnmowers.
- INTELLIGENT SAFETY SYSTEM - The Powrun battery jump starter has 8 types of protection systems, it comes with excellent conductivity and heavy-duty jump cables. It will work even in extreme temperatures from -4°F to 140°F. The P-ONE car starter has an intelligent indicator and a buzzer to remind you of wrong or correct operation.
- 3 IN 1 ROAD TRIP KIT - P-ONE is not only a portable jump box for car battery, but also an 18000mAh portable power bank and LED emergency lamp. Designed with two USB outputs (5V/3A) and (5V/2.1A), the quick charge 3.0 USB port can fully charge your cell phones tablets, and other mobile devices at a fast speed. Upgraded Type-C input port makes the device can be charged faster. The built-in LED light has 4 modes: Flash Light, Strobe Light, SOS Light, and Red Light. It will be a good friend for camping, outdoors, emergencies, and travel.
- HUMANIZATION DESIGN - Powrun battery jump box is equipped with a digital LCD screen to show the battery status. Compared with other devices without LCD screens but only indicators, you can view the battery status and remaining power more visually. The rubber-covered molded case is waterproof (IP65), dust-proof, and shatter-proof which is durable enough for outdoor use. The device is always ready to work.
- WHAT YOU GET - Powrun P-ONE Jump Starter, Intelligent Jumper Cables, USB-C Cable, EVA Storage Case, User Manual, Two years warranty, Excellent after-sales service. Please email us for help if you have any questions, we will answer in 12 hours.
- 【3000A Powerful Jump Starter】GREPRO car jump starter can start most 12V cars, vans, trucks, motorcycles, snowmobiles, lawn mowers, and heavy-duty vehicles up to more times on a full charge (up to 10.0L Gas / 8.0L Diesel). Every driver must have a jump starter battery pack in case of an emergency situation.
- 【Upgrade Intelligent Jump Cable】Smart Jump cables with audible alarms, visual alerts, and 10 built-in protections make it totally safe for anyone to use. Our car jump starter power bank has excellent performance even in extreme temperatures (-4°F-140°F). You can use it with peace of mind.
- 【Dual Quick Charge and DC 12V Output】Big capacity with dual quick charge USB Ports (5V/9V, 5V/2.1A) for up to 3 times faster charging of phones, tablets, cameras, kindles, and other devices. The 15V/10A output can power car air pumps, car vacuum cleaners, and other car accessories through the cigarette lighter adapter (included).
- 【LED Flashlight and Compass】Our car battery charger and jump starter is not only a power bank but also a life-saver that has a built-in super-bright LED flashlight (3 modes: normal/steady mode, flashing strobe, and SOS modes) and a compass to help you in any case, especially for camping, adventure, outdoor, daily, emergency, or travel.
- 【7 Pieces You Can Get】1 × Jump starter, 1 × Carry Bag, 1 × Cigarette Lighter Adapter, 2 × Tyep-C USB Cable, 1 × Smart Jumper Cables, 1 × User Manual. Don't forget, you get lifetime technical support! GREPRO Car jump starter is also the best gift.
- 🚗🚗【HIGH-PERFORMANCE JUMP STARTER】With a peak current of 2000A, this powerful UTRAI T1 car jump starter can quickly start 12V vehicles in a matter of seconds, making it suitable for a wide range of engines including cars, trucks, motorcycles, SUVs, ATVs, UTVs, dirt bikes, snowmobiles, boats, lawn mowers, trailers, RVs, tractors, and more.The T1 lithium battery booster - up to 30 jump starts on a single charge.
- 🚗🚗【COMPACT SIZE AND LARGE CAPACITY】13200mAh T1 Jump Starter designed with USB outputs(5V/2.1A), the quick charge 3.0 USB port can fully charge your cellphones, tablets, and other mobile devices at the fastest (up to 66% faster than a standard charger).The UTRAI T1(6.02*3.19*1.02Inch, 0.3Kg) portable car starter has a simple design and is easy to carry, making it the perfect companion for your outdoor adventures.
- 🚗🚗【3-IN-1 LED FLASHLIGHT】Be prepared for any situation with T1 jump box's built-in LED flashlight. With three modes (Strobe Light/SOS Light/Strobe Light), you have maximum convenience and flexibility at your fingertips. Whether it's for roadside assistance or outdoor adventures, this versatile flashlight is a must-have.
- 🚗🚗【UPGRADED PROTECTIONS】 Safe and easy-to-use jump starter battery pack without the worry of incorrect connections or sparks. The T1 trickle charger system includes eight types of protection, including anti-spark, reverse polarity, low temperature, high temperature and overload protection, among others.Safely connect to any 12-volt automotive car battery. The car battery jump box/jump cable indicator notifies you of incorrect use with an audible buzz and flashing lights.
- 🚗🚗【DURABLE MATERIAL】 Built to withstand the toughest conditions, the UTRAI T1 portable starter battery pack features a new and upgraded shell material. Its combination of PC+ABS ensures exceptional durability, making it fireproof, waterproof, dustproof, and dropproof. You can count on the T1 jump pack to start dead car batteries even in extreme temperatures, ranging from -4°F to 140°F (-20°C to 60°C).
Last update on 2024-03-31 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.