December 16, 2020 NHTSA CAMPAIGN NUMBER: 20V786000
Brake Pedal Plate Can Bend or Detach
A bent or detached brake pedal plate decreases the contact area for the driver’s foot and increases the risk of a crash.
NHTSA Campaign Number: 20V786
Manufacturer Volkswagen Group of America, Inc.
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 313
Summary
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2020 Audi Q3 vehicles. The brake pedal plate can bend or detach under the pressure applied during sudden stopping.
Remedy
Audi will notify owners, and dealers will inspect the weld between the brake pedal and the brake pedal plate and, as necessary, replace the entire brake pedal, free of charge. The recall is expected to begin January 31, 2021. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen’s number for this recall is 46i7.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Audi has a Recall
Safety Recall
Code: 46i7
| Subject | Brake Pedal | |||||||||||||||
| Release Date | December 18, 2020 | |||||||||||||||
| Affected Vehicles |
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign inquiry & verification source.
|
|||||||||||||||
| Problem Description | The brake pedal may not have been manufactured according to the required specifications. In unfavorable conditions, the brake pedal plate may deform in case of an emergency brake situation with full impact loading onto the brake pedal and full detachment of the brake pedal plate cannot be completely ruled out. If the brake pedal plate detaches, the driver would still be able to operate the brake pedal, however the contact area for the driver’s foot would be reduced in size, increasing the risk of a crash. | |||||||||||||||
| Corrective Action | Inspect for a correct weld at the joint connection between the brake pedal and the brake pedal plate. If the weld is insufficient, the entire brake pedal will be replaced.
Dealers should NOT order parts ahead of actually identifying a vehicle that requires a brake pedal replacement due to the very small number of vehicles expected to need it. |
|||||||||||||||
| Code Visibility | On or about December 18, 2020, the campaign code will be applied to affected vehicles. | |||||||||||||||
| Owner Notification | Owner notification will take place in January 2021. Owner letter examples are included in this bulletin for your reference. | |||||||||||||||
| Additional Information | Please alert everyone in your dealership about this action, including Sales, Service, Parts and Accounting personnel. Contact Warranty if you have any questions.
IMPORTANT REMINDER ON VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. Dealers must ensure that every affected inventory vehicle has this campaign completed before delivery to consumers. |
Parts Information (if necessary)
| CRITICAL PARTS INFORMATION |
| STOP!
Dealers should NOT order parts ahead of actually identifying a vehicle that requires a brake pedal replacement due to the very small number of vehicles expected to need it. It’s expected that less than 1% of vehicles will need a brake pedal. |
| Parts Control Type:
VIN to Order
|
If parts are needed to support a vehicle repair:
|
| Initial Allocation:
NO |
Due to the small number of affected vehicles there will be no parts allocation. |
| Criteria | Quantity | Part Number | P.O.C. Part Description | Ordering Method |
| 01 | 1 | 5Q1-723-143-C | Pedal | VIN to Order |
| 2 | 5Q0-721-153-B | Bushing | VIN to Order | |
| 1 | 5Q0-721-165-C | Mounting | VIN to Order | |
| 1 | 5Q0-721-170-A | Clip | VIN to Order | |
| 1 | 5Q1-721-325-A | Pin | VIN to Order | |
| 1 | N -010-335-13 | Screw | VIN to Order |
| NOTE |
| The specified part numbers reflect the status at the start of this action. Interim updates made in ETKA can cause a listed part number to become unavailable. In this case, the new part number specified in ETKA should be used. |
Claim Entry Instructions
| The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order. If customer refused campaign work: |
|||
| Service Number | 46i7 | ||
| Damage Code | 0099 | ||
| Parts Vendor Code | 002 | ||
| Claim Type | Sold vehicle: 7 10
Unsold vehicle: 7 90 |
||
| Causal Indicator | Mark labor as causal | ||
| Vehicle Wash/Loaner | Do not claim wash/loaner under this action | ||
| Criteria I.D. | 01 | ||
| Inspect brake pedal stampings; all stampings are ok, no further work required | |||
| LABOR | |||
| Labor Op | Time Units | Description | |
| 0183 00 99 | 20 | Inspect brake pedal, no further work required | |
| OR | Inspect brake pedal stampings; stampings are not ok, replace brake pedal | ||
| LABOR | |||
| Labor Op | Time Units | Description | |
| 4605 19 99 | 80 | Replace brake pedal | |
| PARTS | |||
| Quantity | Part Number | Description | |
| 1.00 | 5Q1723143C | Pedal | |
| 2.00 | 5Q0721153B | Bushing | |
| 1.00 | 5Q0721165C | Mounting | |
| 1.00 | 5Q0721170A | Clip | |
| 1.00 | 5Q1721325A | Pin | |
| 1.00 | N 01033513 | Screw Hex. Hd. | |
Customer Letter Example (USA)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
NHTSA: 20V786
Subject: Safety Recall 46i7 – Brake Pedal
Dear Audi Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Audi has decided that a defect, which relates to motor vehicle safety, exists in certain 2020 model year Audi Q3 vehicles. Our records show that you are the owner of a vehicle affected by this action.
| What is the issue? | The brake pedal may not have been manufactured according to the required specifications. In unfavorable conditions, the brake pedal plate may deform in case of an emergency brake situation with full impact loading onto the brake pedal and full detachment of the brake pedal plate cannot be completely ruled out. If the brake pedal plate detaches, the driver would still be able to operate the brake pedal, however the contact area for the driver’s foot would be reduced in size, increasing the risk of a crash. |
| What will we do? | To correct this defect, your authorized Audi dealer will inspect for a correct weld at the joint connection between the brake pedal and the brake pedal plate. If the weld is insufficient, the entire brake pedal will be replaced. The inspection will take about half an hour, and brake pedal replacement (if needed) will take about an hour to complete. Both the inspection and replacement (if needed) and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule. |
| What should you do? | Please contact your authorized Audi dealer without delay to schedule this recall repair. For your convenience, you can also visit www.audiusa.com and click on the “Find a Dealer” link to locate a dealer near you and schedule this service. |
| Lease vehicles and address changes | If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card and mail it to us so we can update our records. |
| Can we assist you further? | If your authorized Audi dealer fails or is unable to complete this work free of charge within a reasonable time, please contact Audi Customer Experience at 1-800-253-2834 or via our “Contact Us” page at www.audiusa.com. |
| Checking your vehicle for open Recalls and Service Campaigns | To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit the Recall/Service Campaign Lookup tool at www.audiusa.com and enter your Vehicle Identification Number (VIN). |
If you still cannot obtain satisfaction, you may file a complaint with: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Audi Customer Protection
Customer Letter Example (Canada)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
Transport Canada Recall: Pending
Subject: Safety Recall 46i7 – Brake Pedal
Dear Audi Owner,
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Our records show that you are the owner of a vehicle affected by this action.
| What is the issue? | The brake pedal may not have been manufactured according to the required specifications. In unfavorable conditions, the brake pedal plate may deform in case of an emergency brake situation with full impact loading onto the brake pedal and full detachment of the brake pedal plate cannot be completely ruled out. If the brake pedal plate detaches, the driver would still be able to operate the brake pedal, however the contact area for the driver’s foot would be reduced in size, increasing the risk of a crash. |
| What will we do? | To correct this defect, your authorized Audi dealer will inspect for a correct weld at the joint connection between the brake pedal and the brake pedal plate. If the weld is insufficient, the entire brake pedal will be replaced. The inspection will take about half an hour, and brake pedal replacement (if needed) will take about an hour to complete. Both the inspection and replacement (if needed) and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule. |
| What should you do? | Please contact your authorized Audi dealer without delay to schedule this recall repair. |
| Lease vehicles and address changes | If you are the lessor and registered owner of the vehicle identified in this letter, you shall forward this letter (and any subsequent notice, if applicable) to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle identified in this letter, please fill out the enclosed prepaid Owner Reply Card and mail it to us so we can update our records. |
| Can we assist you further? | If your authorized Audi dealer fails or is unable to complete this work free of charge within a reasonable time, please contact Audi Customer Relations Monday through Friday from 8AM to 8PM EST at 1-800-822-2834 or via our “Contact Audi Canada” page at www.audi.ca. |
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Audi Customer Protection
Repair Overview
• Inspect stampings on brake pedal and replace brake pedal if necessary.
NOTE
• These repair instructions may differ from the labor operations and labor times listed in ELSA.
• Damages resulting from improper repair or failure to follow these work instructions are the dealer’s responsibility and are not eligible for reimbursement under this action.
• This procedure must be read in its entirety prior to performing the repair.
• Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not identically match all affected vehicles.
• Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
• When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate inside the shop to avoid temperature-related component damage/breakage.
Required Tools (if brake pedal requires replacement)
Trim Removal Wedge
-3409-
(or equivalent)
Release Tool
-T10159B-
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 7 of 14
Repair Instruction
Section A – Check for Previous Repair
• Enter the VIN in Elsa and proceed to the “Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a copy with the repair order.
• Confirm the Campaign/Action is open <arrow 1>. If the status is closed, no further work is required.
• Note the Applicable Criteria ID <arrow 2> for use in determining the correct work to be done and corresponding parts associated.
CRITICAL REPAIR STEP
STOP!
If multiple software update Campaign/Actions are open, they must be performed in order of the Start date <arrow 3>. The oldest should be performed first.
• All Safety Recalls must be completed prior to completing this campaign.
• Proceed to Section B.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 8 of 14
Section B – Brake Pedal Inspection
• Inspect the underside of the footpad on the brake pedal using an inspection mirror.
• Inspect the five stampings <arrows> on the brake pedal.
• The stampings should be well defined, deep and complete.
• All five stampings must be complete.
• A defective part has weldings but the impressions are not stamped into the metal (as shown) <arrows>.
• If the brake pedal is ok (all five stampings are complete):
o No further work is required.
o Proceed to Section D.
• If the brake pedal is not ok (any of the five stampings are not complete):
o The vehicle MUST NOT be driven.
o The brake pedal must be replaced.
o Proceed to Section C.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 9 of 14
Section C – Brake Pedal Replacement
Remove instrument panel cover:
• Remove driver side instrument panel side cover (not shown).
• Remove the screws <A arrows>.
• Disengage the instrument panel cover on the side at the pin <2>.
• Unclip the driver side instrument panel cover <1> by hand from the instrument panel in direction of <B arrows> and remove.
• Disconnect the connector for the footwell lamp (if equipped).
Remove driver side footwell vent:
• Remove the expanding clip <1> and remove the driver side footwell vent <2>.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 10 of 14
Disconnect the brake pedal from the brake booster:
• Press and hold the brake pedal <1> in the direction of the brake booster.
• Insert the -T10159B- <A> and pull in the direction of the driver seat. While doing so, counterhold at the brake pedal so that it does not move toward the rear. While doing so, the mount retaining tabs <3> will be pushed out of the pushrod ball head <2>.
• Pull the -T10159B- and brake pedal together toward the driver seat. As a result, the brake pedal is removed from the pushrod ball head.
Access steering column bolt:
• Remove the buttons/nuts <arrows>.
• Free up the carpet in the area of the universal joint and push it slightly rearward.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 11 of 14
Remove steering column bolt:
• Remove the bolt <1> for the universal joint <2> and then remove the universal joint from the steering gear in direction of <arrow>.
CAUTION
The steering column orientation must remain as it was when the steering column is disconnected from the steering rack.
NOTE
Disconnecting the steering column allows for complete removal of the brake pedal pin.
Remove brake pedal:
• Remove the clamp <2>.
• Remove the mounting pin <1> and remove the brake pedal <3> from the mounting bracket.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 12 of 14
Pos.
Part Number
Part Description
1
5Q0-721-165-C
Mounting Parts
2
5Q1-723-143-C
Brake Pedal
4
5Q0-721-153-B
Bushing (x2)
5
5Q1-721-325-A
Mounting Pin
6
5Q0-721-170-A
Clip
Install new brake pedal:
• Install new mounting kit pieces <1> into new brake pedal <2>.
• Transfer rubber pad <3> from old brake pedal to new brake pedal.
• Install new bushings <4> onto brake pedal <2>.
• Install new brake pedal <2> in the reverse order of removal with a new mounting pin <5>:
o Do not lubricate or grease the mounting pin.
o Both bearing bushings must be located in the brake pedal bearing so that the brake pedal is securely guided into the mounting bracket.
Install clip <6>:
• Pin shown removed for clarity.
STEP 1
• Place clip against the edge of the pin on a 45° angle.
• Keep pressure against the end of the clip and rotate the clip down in direction of <arrow>.
STEP 2
• Once clip is properly aligned, push clip in direction of <arrow> until it is fully seated.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 13 of 14
Attach brake pedal to brake booster pushrod:
• Hold the pushrod ball head in front of the mount and push the brake pedal toward the brake booster in direction of <arrow> until the ball head engages audibly.
WARNING
Faulty brakes increase the risk of an accident.
Make sure the brakes are working correctly before driving the vehicle for the first time.
Vehicle reassembly:
• Assembly is the reverse order of removal.
• Clean the threads in the steering column universal joint with a tap.
• Install new steering column bolt and torque to 20 Nm + 90°.
Part Number
Part Description
N -010-335-13
Steering Column Bolt
• Torque instrument panel bolts to 3 Nm.
Proceed to Section D
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
December 2020 46i7 Page 14 of 14
Section D – Campaign Completion Stamp
Item#: AUD4927ENG
-OR-
Item # AUD4927FRE
• Once the campaign has been completed, the technician should stamp the repair order.
• Stamps are available for ordering through the Compliance Label Ordering Portal.
Proceed to Section E
Section E – Parts Return/Disposal
Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S. and the Part Destruction and Core Disposition Report for Canada.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| AUDI | Q3 | 2020 |
3 Associated Documents
Recall Acknowledgement
RCAK-20V786-9499.pdf 243.975KB
Loading...
Reload document 
Open in new tab Defect Notice 573 Report
RCLRPT-20V786-1744.PDF 215.752KB
Loading...
Remedy Instructions and TSB
RCRIT-20V786-0657.pdf 1444.568KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V786&docType=RCL
For the most up to date documents from NHTSA for this Recall, click the lick above
- 【Accurate ABS/SRS Diagnostics Functions】The ABS/SRS diagnostic function is used to retrieve and clear codes from the vehicle’s ABS/SRS systems. It also provides the definition of each code to help diagnose problem areas within the systems that may cause the Malfunction Indicator Light (MIL) to turn on. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. To get real-time tech-support, please email: ❤Autelonline @outlook.com❤
- 【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Component Test, Viewing Vehicle Information, Modules Present, DTC Lookup.
- 【Easy to Perform AbsSrs】Please follow these steps to finish ABS/SRS system diagnostic testing procedure: 1. Turn the ignition on but do not start the engine. 2. Turn on the scan tool and wait for the Main Screen to appear. 3. Select AbsSrs icon in the Main Screen. 4. Select a specific vehicle manufacture’s regional coverage. From the vehicle make screen, select a specific vehicle manufacture and press OK button.
- 【Wide Vehicle Coverage】AL619 supports more than 80 US, Asian and European vehicles, including Acura, Audi, Bentley, Benz, BMW, Bugatti, Chrysler, Ford, EU Ford, GM, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Land Rover, Lexus, Maybach, Mazda, Mini, Mitsubishi, Nissan, Opel, Porsche, Saab, Scion, Seat, Skoda, Smart, Sprinter, Suzuki, Toyota, Vauxhall, Volvo. Check compatibility, please send VIN to ❤Autelonline @outlook.com ❤
- 【Free Life-time Updates & Print Data】Get AL619, it will comes with Free lifetime software update online. You can download the newest software anytime. The Print Data function allows printing out diagnostic data recorded by the scan tool or customized test reports by connecting the scan tool to a PC or laptop with the USB cable supplied.
- 🚘【ABS, SRS, Engine, Transmission Diagnosis】Autel ML629 OBD2 scanner can acccess and scan ABS, SRS, Engine, Transmission and OBDII systems on various European, American, and Asian vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights, get your vehicle ready for the annual test. With its budget-friendly cost, ML629 is ideal car diagnostic tool for DIYers and home mechanics. NOTE: Please send VIN number to [email protected] to check compatibility before purchase.
- 🚘【All 10 Modes of OBD2 Tests】Autel MaxiLink ML629 check engine code reader can perform all 10 modes of OBD2 tests, including read & erase codes, view live data in text or graph, freeze frame, retrieve I/M readiness status, O2 monitor test, On-Board monitor test, component test, view vehicle information and module present. This engine analyzer can pinpoint the fault cause of the engine system to turn off check engine light.
- 🚘【DTC Definitions Lookup】As an upgraded version of AL619, ML619, Autel ML629 is designed to come with built-in DTC library of 7000 DTC definitions. ML629 OBDII code reader can quickly retrieve generic (P0, P2, P3, and U0) codes, manufacturer specific (P1, P3, and U1) codes and pending codes and access the complete library of DTC definitions.
- 🚘【Data Review, Printing & Lifetime Free Updates】MaxiLink ML629 auto diagnostic scanner has data review function that enables DIYers to review the data recorded. And you can print out the diagnostic report for further analysis. NOTE: ML629 comes with LIFETIME FREE software updates. Update the scanner using a card reader before use to cover more vehicles.
- 🚘【Risk-Free Purchase & 24/7 Support】Autel MaxiLink ML629 ABS, SRS scanner is backed by 30 Day NEW REPLACEMENT & FULL REFUND policy and comes with 1(One) Year Warranty. With 24/7 tech & sales support, your purchase is 100% risk-free. NOTE: To change menu language, please send 12 digits Serial Number to [email protected] to get authorization.
- 1⃣【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 2⃣【 Error Fault Code Reader 】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your vehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 3⃣【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world like ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
- ⃣【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】※Live Data Graphing ,more intuitive to know your vehicle’s problem . ※ Large size Color Screen ;※ Print Function:Print the diagnose result easily; ※ with user manual and register & update tutorial video uploaded in the link by us, you can Look up it anytime by ONE-CLICK.
- 👉👉【We Always Got your BACK ! 】This original Launch scanner is backed up by Launch official after-sale services with 5-year warranty, available 60-days return & replacement policy, and 24/7 thoughtful support. We, the authorized Launch seller, provide you with 2021 newest original Launch CRP123 with reliable quality. ([email protected])
- 【POWERFUL FUNCTIONS】 The code reader LAUNCH Creader 8021 supports reading/ clearing DTCs, reading data stream for ABS and SRS system. In addition, oil reset helps reset the mileage to reduce the unnecessary problems; EPB reset helps users with Brake cable/ Brake pad replacement. SAS helps clear the faulty steering angle sensor memories and calibrate the steering angle sensor. BMS reset performs a reset on the vehicle battery for clearing the fault information and re-match the battery.
- 【EXTENSIVE COVERAGE】 The ABS/SRS diagnoses of this scan tool works on 46 vehicle brands from 2006-2016. Oil reset and EPB reset work on 40 car brands. Full OBD2 functions are suitable for most 1996 US-Based, 2001 EU-Based and newer vehicles. It reads common protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
- 【FULL OBD2 FUNCTIONS】 This obd2 scanner has full OBD2 functions, including: Read & Clear DTCs, read freeze frame data, turn off MIL, I/M readiness status, O2 sensor test, Evap Systems Test, on-board monitor test, read vehicle information.
- 【DIAGNOSE, RECORD, REVIEW】 You can do real-time DTC and datastream testing, and you can also record all the scanner testing and review all the data with this obd2 scanner. You can even print out the results on your computer printer so you can talk about the results later with your friends or fellow mechanics.
- 【WARRANTY & LANGUAGES】 This LAUNCH scan tool provides 12-month warranty and offers free internet update (Mini USB). Multiple languages: English, Spanish, French, Russian, German, Portuguese, Japanese.
- 🌲【ABS&SAS&SRS SCANNER】FOXWELL NT630 Plus ABS & Airbag OBD2 scanner does not only provides accurate and professional diagnosis of ABS/SRS/SAS faults , but also removes air from the internal brake fluid chambers after servicing the brakes. 👉TIPS: It can not remove airbag crash data or collision data.
- 🌲【ABS BLEEDING SCAN TOOL】Anytime the brake system is opened to replace components such as calipers, wheel cylinders, the master cylinder, or brake lines or hoses, air gets inside. The air has to be removed by bleeding the brakes if you want a firm brake pedal. You can use this diagnostic scanner to help bleed the brake, cycling the pump and valves during the bleeding process.
- 🌲【ACTIVE TEST】The OBD scan tool temporarily allow you to active or control ABS/Airbag system and component, including switches, sensors, relays& actuators. It saving your time and labor costs.
- 🌲【PERFECT COMPATIBILITY】The diagnostic scanner for automobiles is compatible with almost all OBDII cars, SUVs, minivans, light-duty trucks sold worldwide, Which makes it suitable for both mechanic and DIYers. ABS and SRS Coverage for 60+ Vehicle Makes. SAS calibration is on 30+ selected make.
- 🌲【UPGRADE AND NO WORRIES】The update tool FoxAssist allows you update& uninstall software, save & print data, gaining more available vehicle models and language on the original basis free lifetime. And there is a technical assistance for timely and effectively solving the quality problem within 24 Hours.
- 👍【ABS SRS DIAGNOSIS】: Autel AL609P OBDII Scanner can perform comprehensive diagnosis on ABS and SRS systems of OBD2/CAN compliant vehicles. This pro car diagnostic scanner reads and clears ABS, SRS codes and turns off ABS Airbag warning lights and reset monitors. NOTE: ABS SRS scan for AL609P is NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook.com🚘 to check compatibility.
- 👍【AUTO VIN AND DEEPLY DIAGNOSIS FOR SPECIFIC VEHICLES】: Autel AL609P Pro scan tool ONLY support following specific vehicles - Ford, GM, Chrysler, BMW, BENZ, VW, Land Rover, Jaguar, Volvo, Toyota, Honda, Nissan, KIA, HYUNDAI.
- 👍【COMPLETE OBD2 FUNCTIONS AND MORE】: AL609P OBD2 scanner supports all 10 modes of OBD diagnostic functions including read and clear fault codes, view freeze frame data, retrieve I/M readiness to pass smog check, view live PID data of multiple sensors in text or graph, O2 Monitor Test, On-Board Monitor Test(Mode 6), Component Test to check EVAP system, Module Present and view vehicle information(VIN, CIN and CVN). Autel AL609P comes with Auto VIN acquisition function for quick car diagnosis.
- 👍【TURN OFF CHECK ENGINE LIGHT】: Autel AL609P Auto Diagnostic Scanner helps you determine why the Malfunction Indicator Light is on. With the DTC lookup and Code Breaker function of this car code reader, you can quickly figure out where and how bad is the problem and get tips about how to fix it. Never get ripped off by dealership again!
- 👍【DATA PRINTING AND FREE LIFETIME UPDATES】: AL609P pro check engine code reader can read, record and playback diagnostic data and print data via windows-based PC. The car diagnostic tool comes with LIFETIME software updates and protected free from defects for 12 Months. If there are any questions or concerns, please contact 🚘auteldirect @ outlook.com🚘 for REPLACEMENT or FULL REFUND within 30 Days. Purchase now and go fix something!
- [ENHANCED 4 SYSTEMS DIAGNOSIS] - Not only diagnose the engine system but also performs full detection on vehicle's other 3 main ECU systems (Transmission, ABS, Airbag(SRS)). Reads & erases fault codes, turns off warning lights, and reads live PCM datastream on these 4 systems.
- [FULL OBDII DIAGNOSIS] - Read/clear error codes, DTC look-up, do smog tests including I/M readiness, O2 sensor test, etc. will keep your mind from worrying about whether the data about emission exceeds the standard values. It also reads freeze frame data, does EVAP system test, retrieves vehicle info, and more.
- [ADVANCED DATASTREAM GRAPH] - Reads and displays live data stream in one graph for the 4 systems (Engine, AT, ABS, SRS), allows you to add 4 parameters in the meantime to show the live data, which is intended to help you quickly find potential problems of the vehicle.
- [WIDE VEHICLE COVERAGE] - Compatible with over 46 vehicle makers for a complete car diagnosis. Works on most from 1996 US-based, 2002 EU-based, 2005 Asian-based or newer OBD II & CAN domestic or import vehicles. Supports English, French, Spanish, German, Russian, Italian, Polish, and Portuguese.
- [USER-FRIENDLY DESIGN] - Equipped with an intuitive interface, 4-inch TFT color backlit large screen, 2 cutouts in the back for holding easily, strong rugged anti-slip rubber housing. Supports lifetime free update and print online via an update software tool downloaded from ANCEL website.
- 【UPGRADED VERSION OF CRP129/VIII+ 2021 NEWEST LAUNCH SCANNER + ENHANCED HARDWARE】Based on LAUNCH CRP129 and VIII, LAUNCH CRP129X scan tool adds two more reset services (TPMS reset, throttle adaptation), AutoVIN scan, 4 in1 graphing parameter, Automatic Health Report, Lifetime Free one-click Update, Online Google Search, Battery Voltage Test, navigation & hot keys. We also upgraded the hardware: Larger 5” touch screen, Fast 7.0 Android, 16G RAM, 6100mah BAT, to give you better user experience.
- 【5 SERVICE FUNCTIONS + AUTOVIN SCAN + DIAGNOSTIC REPORT GENERATION】This CRP129X obd2 scanner features 5 most used reset service: Oil Reset, Steering Angle Calibration, Electronic Parking Brake, TPMS Reset, Throttle Adaptation. The Auto VIN technology can identify vehicle make, model, and year information to shorten the vehicle navigation process. You can generate a vehicle health report by one-click and share to your email via Wifi which can help avoid blind maintenance, save time and money.
- 【ABS/SRS/AT/ENG SYSTEMS DIAGNOSTIC + LIVE DATD STREAM IN GRAPHIC+ DATA RECORD AND PLAYBACK】LAUNCH CRP129X scan tool reads graphic data streams for Engine/Transmission/ABS/SRS systems, and turn off the warning light related. Auto record diagnostic data, recorded data can be played back in text & graph format, helps to quick analysis and diagnosis. Playback supports 2 graphs or 4 PID's graphed. 9 Languages Support: English, Spanish, French, German, Italian, Russian, Portuguese, Japanese, Korean.
- 【LIFETIME FREE ONE-CLICK UPDATE + OVER 10000+ VEHICLE MODELS + FULL OBD2 COMPLIANT + BATTERY VOLTAGE TEST】One-click free update via Wi-Fi, fixed bugs, and Upgrade new make up to 2020 models. The LAUNCH CRP129X obd2 scanner works on 57 vehicle brands, Cover OBD1/OBD2/EOBD/JOBD vehicle, mostly manufactured after 1996. Reset DTC, I/M Readiness Status,O2 Sensor Test, EVAP Test etc. Realtime battery voltage graphing helps to Judge the state of the battery.
- 【TECH SUPPORT + WORKS FOR YOU!!!】LaunchDirect and Launch provide 5 YRS Warranty and 60 days unconditional return!!! ➤Any problem, you can freely contact us via our Customer service email or Amazon message. This OBD2 scanner fits for Technician, advance DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechanic, retired mechanic, weekend DIY, individual.
- 👍【ABS&SRS SYSTEM DIAGNOSIS + BMS&OIL&EPB RESET】 The OBD2 scanner supports reading/ clearing DTC, reading data stream for ABS and SRS system. In addition,BMS Reset can Effectively replacing the vehicle battery without visits to mechanics; oil reset helps reset the mileage to reduce the unnecessary problems; EPB reset helps users with Brake cable/ Brake pad replacement.【3 years reliable after-sales service.】
- 👍【ENHANCED 10 OBDII SCANNER FUNCTION】This scan tool can Read/Erase codes, retrieve I/M Readiness and freeze frame data, Patented One-Click Smog Check, show live data in the text and graph format, Auto VIN acquisition, O2 Sensor, EVAP Test (Mode 8), advanced On-board Monitoring (Mode 6). This code reader is suitable for DIYers to efficiently troubleshoot Check Engine Light and diagnostic trouble codes, fastly find out what problem is and perhaps fix it.
- 👍【WIDE RANGE DIAGNOSE SCANNER】 The ABS/SRS diagnoses of code scanner works on 46 vehicle brands from 2006-2016. Oil reset and EPB reset work on 40 car brands. Full OBD2 functions are suitable for most 1996 US-Based, 2001 EU-Based and newer vehicles. It reads common protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4 and support for 7 languages: English, Spanish, French, Russian, German, Portuguese, Japanese, which make it easy to use for different countries people.
- 👍【EASY TO OPERATE】The abs scanner via true color LCD display screen to indicates the test results , with the silicone keypad you can easy to access the each of menu options, the I/M Readiness hot key can check the state emissions readiness check and drive cycle verification, the menu layout on the screen is easy to understand and you will no trouble to figuring out how to do what you needed
- 👍【WORRY-FREE SERVICE】This automotive code reader supports a lifetime free software update and Review&Print diagnostic reports, just connect to a computer via USB, and we offer 3 years after sale service, if you are not sure if your car is compatible, please feel free to contact us first.
- Read and clear your Check Engine Light and all other vehicle systems. Get your unlimited free vehicle specific Repair Reports, generated from our database of millions of fixes verified by Professional Automotive Technicians
- As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data)
- Officially licensed and certified for Apple and Android devices
- The BlueDriver App and BlueDriver Sensor work exclusively with each other to ensure quality
- BlueDriver is the Professional OBD2 Diagnostic Scan Tool trusted by mechanics and developed by Professional Engineers in North America
Last update on 2021-01-27 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-01-27 / Affiliate links / Images from Amazon Product Advertising API
