Safety Recall Code: 69BV – Incorrect Air Bag Module Parameters/FMVSS 208 – 2020-2021 Audi Q7

Overview – Introduction

The Immobilizer is a theft-deterrent device that adds a layer of security to VWGoA vehicles that include the following brands: Audi, Bentley, Lamborghini, and VW. Certain repairs such as replacing emission parts cannot be performed without resetting the immobilizer code for the vehicle. This is done by a technician using the VAS for PC software to synchronize the immobilizer code embedded in the ignition key with other codes resident on parts such as the Transmission Control Module, Engine Control Module, and Instrument Cluster.

Before you can replace an emission part

Whenever you replace an emission-related control module, the immobilizer must be reset using the VAS for PC software. This can only be done if you meet the following requirements:

• You have enrolled into the program (see step 1 – Complete Pass Thru Enrollment Forms)
• You have received an email from VWGoA that contains a Security ID and Password to access the immobilizer application hosted in Germany
• You have received an email from VWGoA that contains a certificate file (e.g. IndepeDeale.30001.300999.pfx)
• You have installed the certificate onto your PC
• You have obtained a J 2534-1 Pass Thru device (see recommended J 2534-1 Pass Thru devices)
• You have performed the steps outlined in VAS for PC Setup

Recommended J 2534-1 Pass Thru devices

Pass thru devices are available for purchase from a recommended Manufacturer for registered workshops to perform Immobilizer functions. The Pass Thru devices that have been tested to work with VAS for PC follow:

I+ME Pass-Thru+XS Available from ACTIA Corp. http://www.actiaus.com, http://www.passthruxs.com or (734) 266-2083
DrewTech CarDAQ2534 Available from Drew Technologies, Inc. http://www.drewtech.com or (734) 222-5228
Blue Streak iflash Global Programmer Available from Blue Streak Electronics http://www.bsecorp.com or (905) 669-4812 Email at [email protected]
DG-VSI-2534 Available from Dearborn Group Technology http://www.dgtech.com or (248) 488-2080 Email at [email protected]

Note: Currently, Pass Thru re-programming supports SAE J2534-1 version 4.04 only. Please ensure that you have installed the appropriate driver for your Pass Thru device. For details read the documentation shipped with your device or contact the manufacturer.

Immobilizer-Reprogramming-Instructions

https://erwin.vw.com

https://erwin.audiusa.com

Bestseller No. 1

VXDIAG VCX Nano Compatible For Ford/Mazda 2 in 1 Diagnostic Tool With IDS Programming Tool

• [Vehicle Coverage] One device Compatible for Ford and Compatible for Mazda, Support vehicle till 2018 year. (Can't Support Ford F-150 ). Support Automatic Vehicle Recognition.
• [ECU Functions] Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.). Live Data-stream with Recording & Playback Functions for Main ECUs. New Software Re-flash for Existing ECUs.
• [Functional] Connect via USB. Support Read & Clear Diagnostic Trouble Codes (DTCs); Set, Adjust or Remove Speed Governors; Steering Angle Resets, Guided Fault Finding&All Other Dealer Functions.
• [Update] Update by CD with Unlocked Firmware. ★Please Note: If you have any problem when you install the software, please feel free to contact us, our technology team will provide customers service to help you solve the problem. Multilingual: Support English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/Norwegian/Portuguese(European)/Portuguese(Brazil).
• 🚩Firmware support update online. If you have any problem, please fell free contact to us, we will help you fix it by TeamViewer or message support.

$99.00

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 2

Autel MaxiIM IM608 [with GBOX2 & APB112 ] with XP400 Key Programmer and J2534, IMMO Key Programming Scan Tool No IP Restriction Free 1 Year Update 2021 Newest All Systems Diagnosis

• 【XP400 Programmer 】XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc. Please send VIN number to▲Autelonline @ outlook . com▲ to check compatibility before purchasing.
• 【KEY PROGRAMMING Function】The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly.
• 【IMMO & J2534 Reprogrammer】The Wireless Diagnostic Interface supports two communication methods with the tablet: BT and USB. The working range for BT communication is about 210 feet (70 m). You can perform key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlash.【 Note: J2534 can't program ECU with the IM608】
• 【ECU CODING & ACTIVE TEST & 23 Services Function】Bi-directional control of the ECM is useful in determining whetherthe ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc.
• 【No IP Lock & 1 Year Free Update + Life-long time tech-support】More langauage are available such as French, German, Italian, Polish, Dutch, Swedish, Korean, Japanese, Russian. Please contact by providing SN if needing authorized.

$3,599.00

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 3

Autel MaxiCOM MK908P Automotive Diagnostic Scan Tool with J2534 ECU Programming and ECU Coding Advanced Full System Scanner 30+ Service Functions, MS908P Upgraded, With TS401 TPMS Service Tool

• OE-Level OBD Scanner: The diagnostic tool serves as the most advanced automotive diagnostic tool, comes with a J2534 ECU programming device that helps Benz and BMW users replace the existing software/firmware in the ECU, program new ECUs and fix software-controlled driving performance and emission issues. Welcom to contact [email protected] or ask through Q&A for your specific need and to ensure the vehicle compatibility
• All-system Diagnose & Active Test: Provided with full-systems diagnosis(ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.). The diagnostic tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in Component Test enables the MK908P to transmit control commands to operate the vehicle systems
• 30+ Service Functions: As the advanced version of MS908P,MS908S,MS908E, MS908PS PRO, MK908P also offers another 30+ service functions to help your repairing work faster, easier, and more professional, These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more
• Broad Compatibility: The software of MK908P has a wide range of compatibility and can be used to diagnose vehicles from over 80 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service. The MaxiFix provides you with an online troubleshooter database, and Remote Desk allows you to get help from others via TeamViewer software
• With TS401 TPMS Relearn Tool: Since MK908P only supports basic detection functions for TPMS, so it is equipped with TS401, a powerful TPMS tire pressure reset tool, which can help you to program a sensor and do the Relearn procedure

$2,529.00

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 4

Autel MaxiSys Pro MK908P Automotive Diagnostic Tool (Same Functions as MaxiSys Elite) with WiFi Bluetooth Jbox J2534 VCI ECUs BCM PCM Reprogramming and Coding

• Advanced Diagnostic Scanner for ECU Programming : MK908P has been designed to perform some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz. With the jbox/J2534 VCI or BMW Ethernet Cable, you can edit the cars performance data, like adjusting RPM, fuel injection, etc. A professional car diagnostics scanner to save time/effort on repairs. Form some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz
• Comprehensive Features : Besides Coding and ECU programming functions, the scan tool supports reprogram keys, Bi-directional control, active test, ABS bleeding, complete capabilities for codes, live data, actuation tests, adaptations, prints out recorded data with Wi-Fi. Warm tips Benz-14 & Chang'an-3 Adapters only for UK version, not US version
• User Friendly : The live data stream displayed the real time PID data from ECU and the displayed data included analog inputs and outputs, digital inputs and outputs and system status information broadcast. The graphic display greatly improved the readability and understandability of above parameters. This is definitely a perfect scan tool for enthusiasts interested in knowing how their car is running
• Easy to Operate : The hardware can equal to a best rank android tablet in the market and that made the whole diagnostic procedure more quickly and precisely. Maxisys platform, cloud-based Maxisys provide a large amount of data about the diagnosis and repair advices, that’s really helpful, whenever you encounter problems, you can find solutions from it
• Compatible with Some Add-ons : Combination with Oscilloscope Maxi Scope MP408 and Digital Inspection Cameras MV108, the power of this tool is amazing and the detail you receive about every component of the vehicle makes pinpointing a problem painless. Affordable combination of MS908P and TS601 supports TPMS programming, which turns into a powerful diagnostic tool.

$2,399.00

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 5

Autel IM608 Automotive Key Fob Programming Tool - MaxiIM IM608 Car Diagnostic Scanner ECU Coding/Programming Device with J2534 XP400 for Oil Reset/EPB/TPMS/BMS/SAS/DPF/IMMO Function & More Service

• 【XP400 Key Programmer for IMMO & VCI-J2534 Programming】: The XP400 is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, Freescale 9S12 MCUs. The J2534 is a fully compliant SAE J2534-1/J2534-2 device, specially designed to provide users with PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus and offer the most significant features by OEM Customers.
• 【Reliable Key Programmer & ECU Programming Tools】: Equipped with XP400 key programmer and MaxiFlash ECU re-programmer, this Autel scanner performs IMMO Add Key, All Key Lost and Key Learning for 3rd generation Benz. Besides convenient PC communication and ECU reprogramming capabilities from the MaxiFlash tool, it can read transponder data (including Mercedes Benz infrared smart key), clone/generate exclusive keys, etc. by working with the XP400 key programmer.
• 【All System Diagnostic & Advanced Maintenance Services】: Autel Diagnostics application can access the ECM of various vehicle control systems after VCI connection. The Maintenance Service covers Oil Reset/EPB/TPMS(sensor activate)/BMS/ABS(brake bleeding)/Aftertreatment/IMMO(advanced IMMO & key programming)/Injector/SAS/Suspension/Throttle/Win Dr Roof/Seats/Odometer/Lang Change/Headlamp/CHG tire size/TEC learn/SRS/Cylinder/VGT learn/Speed&PTO/Clutch/Trans adaption/Airbad reset/AF setting ...more
• 【Active Test & ECU Coding】: During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, betweentwo operating states. After repairs or replacements of vehicle parts, Autel IM608 can reprogram adaptive data for certain components of the test vehicle through ECU Coding.
• 【1 Year Warranty with 45Days Replacement & Free Software Updated】: One Year Free updated through Autel Update Application. The IM608 Tablet automatically searches for available updates for all of the MaxiIM components when it's connected to the Internet. 7*24hours Local Technical Support & Satisfaction Guarantee. So Click“Buy it now”and enjoy a high-quality product with confidence. (If you need to confirm your car model, pls message us: )

$3,299.00

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 6

Autel Maxisys Elite Diagnostic Tool (Upgraded Version of MS908P Pro) with WiFi BT Full OBD2 Automotive Scanner with J2534 ECU Programming and 2 Years Update

• 【ADVANCED ECU PROGRAMMING】 This pro-level scan tool features Autel’s Powerful Complete Diagnostic System with easy-to-go workflow of ECU Coding: / for customer individual customization of the car (to improve vehicle performance, or stimulate high-end car functions); / for the configuration alteration (when a component is replaced); / and for multiple car systems’ recognition of each other etc. , with optimal efficiency.
• 【36+ SERVICE FUNCTIONS】This OE-Level diagnostic scanner offers more than 36 service functions as Oil Reset, Injector Coding, EPB, TPMS, BMS, Brake Bleed, DPF, Immo Keys, SAS, Suspension, Throttle etc. It also gains full access of all available vehicle modules to Retrieve ECU information, Read & Erase DTCs, and View Live Data of each parameter item, with Bi-Directional Control (Active Test) to check the operating conditions of various car systems and components.
• 【J2534 PROGRAMMING】Autel MaxiSys Elite features J2534 ECU Programming for BMW & Benz, to access, update, replace and program the existing software/firmware in ECUs, without the need of a dealer-only tool, to troubleshoot and deal with complex vehicle problems like Driveability, Fuel Efficiency, Power Loss, Fault Codes, and Durability of mechanical parts etc. , with easy step-by-step instructions. This ultimate Autel scanner is made for perfection.
• 【DISCOVER OUR 24/7】2 years FREE software update + 1 year . This diagnostic tool is backed by Autel’s professional tech team and service team, to offer the top quality product and service in the industry. Autel MaxiSys Elite comes a way in easing up and increasing efficiency in your professional diagnostics from all the features mentioned above. The returns are a . *The tool is only available to sell in the U. S. Region.
• 【STATE-OF-THE-ART HARDWARE】This Android 4. 4. 4 KitKat OS-based, tablet-style diagnostic scanner incorporates the world’s fastest mobile processor NVIDIA’s Tegra 4, with internal 2GB RAM (32GB SSD), for boosted performance (boot-up time < 20 sec). Also, Elite comes with a visually stunning sharp Retina display of 9. 7”, with an 8. 0-megapixel rear camera with flashlight and auto focus. This scan tool is bound to work as fast and effective as possible.

$2,950.00

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 7

VXDIAG VCX Nano Diagnose and Programming Tool Compatible with J2534

• VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
• VXDIAG VCX Nano support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
• OS support Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
• Please download the latest vxmanager from vxdiag official website. Use new vxmanager to update firmware and driver and then update your device authorization.
• We provide full time online support, if you have any questions about our device, please feel free to contact us online via ask us a question or send us email

$79.99

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 8

Autel Maxisys Pro MK908P, Top OBD2 Diagnostic Scanner with J2534 Reprogramming, ECU Coding, Active Test, 30+ Service Functions, Same as Maxisys Elite, MS908P, Free Video Inspection MV108 is Given

• 👍【OE-LEVEL】The hottest-selling comprehensive diagnostic scanner Autel Maxisys Pro MK908P in US & UK is made for the perfection with perfection, sharing the same OE-level features as expensive factory tools including ECU programming, coding, active test, 30+ service functions, and many more, for 98% vehicle models on the market, but with a much more attractive price tag. The scan tool is an ideal one-stop ultimate solution for large repair shops doing effective automotive diagnostics.
• 👍【ECU PROGRAMMING】As the upgraded version of MS908P and Maxisys Elite, Autel scanner MK908P allows ECU online programming on Benz/BMW, which were previously “dealership” only, to update the existing ECU software for fixing software-controlled issues. Its ECU online coding helps simulate high-end car functions, recognize the new actuators, and more, for better car performance.
• 👍【30+ SERVICE FUNCTIONS】 Oil Reset, EPB, TPMS, BMS, Brake Bleed, DPF, Immo Keys, Injector, SAS, Suspension, Throttle, WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Cylinder, Trans Adaption, Airbag Reset, etc., and still growing. Designed for Professional and locksmiths, MK908P is really a all-in-one top auto scanner.
• 👍【ADVANCED FUNCTIONS】As an added benefit, the J2534 reprogramming box is available for ECU programming on more car models (OEM software required). Advanced functions as Guided Functions (VAG group); Personalization (BMW, Porsche, Toyota); Programmable Module Installation (Ford, Mazda); Power Balance (Chrysler, GM, Ford); Component Matching; Online Parameterization; and Online Account Login Service (VW, Audi, Skoda, Seat) are all packed being a perfect fit for modern automotive maintenance.
• 👍【FREE AUTEL MV108】Autel MaxiVideo MV108, originally pried at 59$, is specially designed to connect with Autel MaxiSys to get the optical image evaluation, detection, and diagnosis. This video scope can perfectly access the desired point of difficult-to-reach car interiors, helping you a lot in repair work with its 640480 Pixel, 8.5mm Diameter, LED Illumination.

$2,409.00

Buy on Amazon Price incl. tax, excl. shipping

Bestseller No. 9

Autel Maxisys CV MS908CV Heavy Duty Diagnostic Tool with J-2534 ECU Programming, BT, WiFi Connection

• Designed for CV ➤ Autel MaxiSys MS908CV boasts the pro-level diagnostics for Commercial Vehicles (Expert, Buses & Trucks), to get all module access for ECU Coding, Active Test (Bi-directional Control), 23 Adaptation Services, 25 Service Functions, Read/Erase Codes and Live Data, etc., being compatible with multiple supported protocols: SAE J1939, SAEJ1708, Manufacture-defined protocol J1939, Manufacture-defined J1708, KWP, VPW, UDS-CAN, CDL.
• ECU Coding ➤ This Heavy Duty diagnostic tool allows you to re-flash the commercial vehicles’ control modules, and write in adaptive data for certain components after making repairs or replacements, to fix the issues as: Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts, etc. (Note: Coding only changes preprogrammed options already existent in the software.)
• 23 Adaption Functions ➤ This commercial vehicle scanner provides various 23 component adaptation services, to calibrate or reset certain components after repair or replacement as: DOC/DPF Instant Replacement Reset, Fuel Pressure Adaptation Accurate Reset, After Treatment Maintenance, Calibration of Rack Sensor, Calibration of Injector Trim, and others, with fast navigation for optimal efficiency.
• 25 Service Functions ➤ This automotive diagnostic tool can Read/Clear codes, view graphic Live Data, and features an array of 25 guided maintenance services as: Oil Reset, Injector Coding, DPF, EPB, ABS/SRS, Suspension, Throttle, Odometer, Lang Change, Headlamp, CHG Tire Size, Airbag Reset, Cylinder, Turbocharging, Limit, Clutch, WIN DR ROOF, TEC Learn, Trans Adaption, Immo Keys, TPMS, BMS, Brake Bleed, Seats etc.
• Ultimate Scanner ➤ Autel MS908CV gives you all necessary functionalities, while still remaining easy to use with boosted multitasking performance: Android 4.0 operating system, Quad-Core Processor, 2GM RAM & 32GB SSD, 9.7" 1024*768 IPS Screen, 11000 mAh Battery (8hrs non-stop operation), 5.0M AF Rear Camera, etc..This scanner is entitled to 1-year warranty with 1-year FREE software update. Welcome to contact us for your vehicle’s compatibility check, 24/7.

$2,820.00

Buy on Amazon Price incl. tax, excl. shipping

SaleBestseller No. 10

Autel MaxiFlash Elite J2534 Pass-Thru ECU Programming Accessory Tool Original for Autel MK908, MS908, MS908S, MK908P, MS908S Pro, MaxiSys Elite

• 👍【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook.com🚘 !
• 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
• 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
• 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures quickly reprogramming even the newest controllers & Internet upgradable and updatable.
• 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility before your order.

$1,099.00

Buy on Amazon Price incl. tax, excl. shipping