NHTSA ID Number: 10161607
Manufacturer Communication Number: A9119672055026_2
Summary
This bulletin contains a software update for when the rearview/overhead view camera and the optical parking aid are sporadically not switched on when moving into reverse.
10 Affected Products
Vehicles
Customer states:
For vehicles with < 0318 camera software (address word 006C):
- The rearview/overhead view camera and the optical parking aid are sporadically not switched on when moving into reverse. The previously adjusted menu (radio, navigation, etc.) stays the same (Figure 1).
- The parking aid button in the center console lights up and an acoustic obstacle warning is given.
For vehicles with camera software (address word 006C):
- The picture of the top view camera is black and no guide lines are shown (Figure 2).
Workshop findings:
- No relevant DTCs are stored.
Technical Background
The MIB2 High software needs to be updated.
Production Solution
New infotainment software introduced into MY19.
Service
Required equipment:
- ODIS Tester
- SVM code
- MIB2 High Software update on SD Card (See Required Parts and Tools or Download the software from MirrorServer using the SD Creator Program) Time to complete update:
- Approximately 30-60 minutes (includes 20-50 minutes for the software update and 10 minutes for the SVM work)
Service work:
Update the MIB2 High infotainment system using either Method 1 or Method 2 according to TSB 2047576: 91 MIB2 High Software Update Instructions (PR Code 7UG) and use SVM code indicated below:
| Vehicle | SD Creator Part number | SVM code |
| A4, A5, Q5, and Q7 | 4M0906961BN | MHI2QUS5087 |
| A3 | 4M0906961CB | MHI2US5107 |
Method 1: Automated update using ODIS
Method 2: Manual update due to SVM code or Server issues
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
- TSB 2047812, 00 SD Creator: how to setup and use the SD Creator for obtaining vehicle software updates via the MirrorServer.
- TSB 2047576, 91 MIB2 High Software Update Instructions (PR Code 7UG).
SEOCONTENT-START
Page 1 of 5
© 2019 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
91 MIB2 High: rearview camera/overhead view camera does not turn on
91 19 67 2055026/2 June 19, 2019. Supersedes Technical Service Bulletin Group 91 number 19-59 dated May 15, 2019 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A5
2017
All
MIB2 High
A5
2018
N900031 – N999999
Or
A900001 – A999999
MIB2 High
A3, A4, Q5, and Q7
2017 – 2018
All
MIB2 High
Condition
REVISION HISTORY
Revision
Date
Purpose
2
–
Revised Condition (Added new statement and photo)
1
05/15/2019
Initial publication
Page 2 of 5
© 2019 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Customer states:
For vehicles with < 0318 camera software
(address word 006C):
The rearview/overhead view camera and
the optical parking aid are sporadically
not switched on when moving into
reverse. The previously adjusted menu
(radio, navigation, etc.) stays the same
(Figure 1).
The parking aid button in the center
console lights up and an acoustic
obstacle warning is given.
For vehicles with camera software
(address word 006C):
The picture of the top view camera is
black and no guide lines are shown
(Figure 2).
Figure 1. Previously adjusted menu stays the same (vehicles
with camera software < 0318).
Figure 2. Camera picture without guidelines (vehicles with
camera software 0318).
Workshop findings:
No relevant DTCs are stored.
Page 3 of 5
© 2019 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Background
The MIB2 High software needs to be updated.
Production Solution
New infotainment software introduced into MY19.
Service
Required equipment:
ODIS Tester
SVM code
MIB2 High Software update on SD Card (See Required Parts and Tools or Download the software from
MirrorServer using the SD Creator Program)
Time to complete update:
Approximately 30-60 minutes (includes 20-50 minutes for the software update and 10 minutes for the SVM
work)
Service work:
Update the MIB2 High infotainment system using either Method 1 or Method 2 according to TSB 2047576: 91
MIB2 High Software Update Instructions (PR Code 7UG) and use SVM code indicated below:
Vehicle SD Creator Part number SVM code
A4, A5, Q5, and Q7 4M0906961BN MHI2QUS5087
A3 4M0906961CB MHI2US5107
Method 1: Automated update using ODIS
Method 2: Manual update due to SVM code or Server issues
Page 4 of 5
© 2019 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Warranty
Claim Type: 110 up to 48 Months/50,000 Miles.
G10 for CPO Covered Vehicles – Verify Owner.
If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number: 9196
Damage Code: 0039
Labor Operations: Software Update 0151 0000 According to
TSB #2047576
Diagnostic Time: GFF No allowance 0 TU
Road test prior to the service procedure No allowance 0 TU
Road test after the service procedure No allowance 0 TU
Claim Comment: As per TSB #2055026/2
All warranty claims submitted for payment must be in accordance with the Audi
Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi
Warranty.
Required Parts and Tools
Vehicle Part number SVM code
A4, A5, Q5, and Q7 4M0906961BN 01 (Shop tool)
A3 4M0906961CB 01 (Shop tool)
Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
TSB 2047812, 00 SD Creator: how to setup and use the SD Creator for obtaining vehicle software updates via
the MirrorServer.
TSB 2047576, 91 MIB2 High Software Update Instructions (PR Code 7UG).
Page 5 of 5
© 2019 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi
of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
All part and service references provided in this TSB (2055026) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2019 Audi
of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
SEOCONTENT-END
2055026/2
June 19, 2019
- 【Continuous Upgraded 1080P AHD Backup Camera】After launching three car backup cameras, PixelMan further upgrade and launch the new reversing camera PMD2A-S. This car camera use the latest chip special for reversing camera made in Japan, this chip not only has excellent image output, but also has stunning performance under strong light and dark light. Strict in details and only make the best products is what PixelMan pursues. It is also essential to you, isn't it?
- 【Support HD and AHD switching】This upgraded back up camera even supports HD and AHD switching. Each optimization improves the definition, signal stability, waterproof performance, durability, installation, etc. Our vehicle backup camera can be switched to AHD signal output to achieve 1080P display (Under the premise that the screen supports AHD signal).
- 【1/2.7in AHD 1080P Large Chip Adopted in This Reverse Cam】The chip size determines the amount of reversing camera output pixels, compared with 1/4in chip used in ordinary backup cam, the most apparent feature is the enhanced brightness and color saturation besides of the sufficient clarity. The colors become more vivid and true, the increased brightness makes the images more clearly, meanwhile, the night vision effect also be enhanced, you can back the car easily without extra light at night.
- 【170° Wide Angle Optical Glass HD Lens】The lens is the core component of the reverse camera for car. The HD lens used in PMD2A-S wide angle backup camera is very different from ordinary lens in appearance, it has a larger aperture and a stronger sense of technology. High transmittance glass, fish eye appearance, F1.4 aperture, all these features directly determine the wide angle, maximum output pixels and night vision performance of the license plate camera.
- 【Back Up The Car Easily】Whether it is day or night, you can see almost everything behind the car when reversing, PixelMan camera for car reverse will let your driving easier and safer. Isn’t it what you need?
- Backup camera with strong waterproof function. It designed with fully sealed glue filling craft, you no need to worry about water, fog or mist inside. Caution: please separately order a suitable harness to complete installation if connect it to a factory radio/screen
- Rear view camera with a latest HD 600TVL 1/2.7inch image sensor and horizontal 135 degree super wide viewing angle lens, that's great for you to check the invisible blind spot clearly and make parking safe and simple
- Reverse camera housing is metal,small size and OEM style design(OEM look). Also it is built in multifunctional switching loops function,you can switch it to be front view, also support guide line on/off switching and cut the purple loop to choose a vertical down-ward view from like a tailgate down view(tailgate mounting)
- Backup camera can fit most types of DC 12-24V different length vehicles. Such as Cars, Pickup Trucks, SUVs, Vans, RVs, etc. It with great low light performance (low illumination level: 0.01Lux)
- Customer satisfaction is our top priority. NATIKA offer 24 months replacement warranty,7 days-24 hours professional customer service and technical support
- 1 MINUTE MAGNETIC QUICK INSTALL: This backup camera for truck features a base with 6 powerful magnets made from "3rd generation rare earth permanent NdFeB magnets." It remains functional in extreme conditions, withstanding temperatures as low as -452°F and as high as 1166°F without demagnetizing or falling off. The wireless backup camera base is coated with a soft rubber layer, offering excellent wear resistance while protecting your vehicle's paintwork without compromising the magnetic strength
- SCREEN RESOLUTION & HD NIGHT VISION: Pemacom's self-developed algorithm can improve the clarity of the backup camera picture by about 80% compared to the original. The backup camera wireless is also equipped with the most unique CMOS image sensor and 1080P color chip, which can quickly analyze the picture, and also provide clearer picture at night or under low light environment, effectively suppress glare, restore the truest color, reduce safety hazards, and ensure safer driving
- POWERFUL DIGITAL SIGNAL: The back up camera systems for truck features a more powerful digital signal receiver with frequency hopping technology. It supports 2.4GHz WiFi transmission, offering enhanced anti-interference and stability, increasing performance by 70%. The image remains clear, without frame drops or delays. The magnetic backup camera's signal transmission distance reaches up to 33 feet, suitable for trucks, pickups, cars, trailers, campers, small RVs, and hitch trailers
- EXTRA LONG 24-HOUR BATTERY LIFE: This portable truck backup camera features a built-in 15,000mAh rechargeable lithium-ion battery with larger capacity. The solar backup camera also includes a 5W solar panel and a 5V-2A TYPE-C charger, ensuring longer battery life when power is low or sunlight is limited. A full 5-hour charge provides up to 24 hours of use, making it ideal for long-distance travel
- POWER-SAVING AUTO SLEEP MODE: When the wireless backup camera for trucks is not in use, you can turn off the monitor via the cigarette lighter or USB plug, and the rear view camera automatically enters energy-saving sleep mode. This feature unnecessary power consumption, extends battery life, and improves both safety and durability—without the need for manual shutdown
- Precise Fit for Your Vehicle: LCWRGS back up camera is compatible with 2011 2012 2013 2014 Dodge Charger, Chrysler 300 2011-2014 . Please double-check your exact model and year and OE number before purchasing to ensure a perfect fit.
- Replaces OE Part Number: 4672639AA, 56054058AD, 56054058AE, 56054058AF, 56054058AG, 56054157AG, 56054058AH. Designed as a direct OE replacement, this rear view backup camera offers a seamless fit and reliable HD parking assistance for your cars.
- Clear HD Image and Night Vision: Equipped with a high-resolution, wide-angle camera lens and infrared night vision technology, our rear view camera provides a sharp, expansive view behind your vehicle. It makes obstacles clearly visible in both daylight and low-light conditions for safer reversing.
- IP68 Waterproof & Reliable: Constructed with high-quality materials and superior electronics protection, this backup camera for truck is rated IP68 for complete waterproof and dust-proof performance. It works reliably in pouring rain, storms, and challenging environments, ensuring lasting durability.
- True Plug-and-Play Installation: Designed to seamlessly replace your original old or broken parking assistant camera. It is easy to install and just simply plug into the existing vehicle harness—no complex wiring or programming needed. If you have any issues or concerns with your reverse backup camera, please feel free to contact us anytime.
- Easy to Install: The backup camera for car takes only 15 minutes from start to finish installation, just 2 steps: ① First connect the camera and monitor through the 4-pin video power cable made of 3.0MM pure copper that comes with the camera. ② Then plug the backup camera system into the cigarette lighter, manual switch, plug and play. Or you can also connect it to the reversing lights only as a reversing use, automatically triggering the reversing image when reversing
- Stable Signal Transmission: The LeeKooLuu backup camera is superior in signal stability compared to other backup camera kit. It will automatically minimize energy loss during transmission, not only will there be no signal delays, interference, fluctuations or intermittent problems, but also realize the transmission of real-time data, providing you with clear picture and works great HD 1080P color images at all times, to ensure safer driving
- All-Weather Defender: The backup camera for truck housing is made of ABS-TC material and utilizes the latest nano-coating sealing technology with IP69 level waterproof performance, which is able to work reliably and perfectly to provide a crystal clear picture in extreme environments from -22°F to 176°F. It is like a brave guardian, not eroded by any water or fine particles, tenaciously resisting the baptism of wind/rain/dust/high and low temperatures, enhancing the safety index and service life
- Ultra HD Picture: This back up cameras integrate advanced optical anti-shake technology and the high-performance SC1346 color image sensor chip to counteract vibrations and eliminate motion blur on uneven roads. The intelligent stabilization ensures a great picture and very clear video in real time, so you can easily spot obstacles, pedestrians, and parking lines even on bumpy terrain. With this reliable rearview feed, reversing becomes safer and more precise, giving you peace of mind every time
- Adjustable Monitor, Easy to See: The backup camera with monitor is universally compatible with most vehicles, including cars, trucks, trailers, vans, SUVs, campers, and more. It effectively eliminates blind spots on your vehicle, enhancing safety. Additionally, you can adjust various settings such as brightness, contrast, and image flip to optimize the viewing experience for different lighting conditions and personal preferences
This product presentation was made with AAWP plugin.





