September 16, 2020 NHTSA CAMPAIGN NUMBER: 20V561000
Modifications to Vehicles Made Them Noncompliant
Vehicles that do not meet all regulatory requirements may have an increased risk of a crash or injury to vehicle occupants.
NHTSA Campaign Number: 20V561
Manufacturer Volkswagen Group of America, Inc.
Components UNKNOWN OR OTHER
Potential Number of Units Affected 23
Summary
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2018 Volkswagen Golf R and Atlas, 2017 Golf Alltrack and E-Golf and 2016-2018 Passat vehicles. These internal use vehicles were sold without confirmation that they were built to all applicable regulatory requirements and may have been modified prior to sale. As such, these vehicles may fail to comply with the requirements of various Federal Motor Vehicle Safety Standards.
Remedy
Volkswagen will notify owners and will repurchase the vehicles. The recall began October 6, 2020. Owners may contact Volkswagen customer service at 1-800-893-5298. Volkswagen’s number for this recall is 01E9.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Volkswagen has a Recall
Compliance Recall – USA
Code: 01E9
| Subject | Vehicle Build Status | ||||||||||||||||||||||||||||||
| Release Date | October 01, 2020 | ||||||||||||||||||||||||||||||
| Affected Vehicles |
Check Campaigns/Actions screen in ELSA on the day of repair to verify that a VIN qualifies for repair under this action. ELSA is the only valid campaign inquiry & verification source.
| ||||||||||||||||||||||||||||||
| Problem Description | Volkswagen has determined that certain internal use vehicles were sold without confirmation that they were built to Volkswagen’s series production standards and applicable regulatory requirements, and that documentation about their build status may be incomplete or could not be verified. It is also possible that modification(s) were made to these vehicles during their internal use period for which documentation may be incomplete or could not be verified. Volkswagen is not aware of any accidents or injuries as a result of this issue. | ||||||||||||||||||||||||||||||
| Recall Information |
| ||||||||||||||||||||||||||||||
| Additional Information | Please alert everyone in your dealership about this action, including Sales, Service, Parts and Accounting personnel. Contact Warranty if you have any questions.
IMPORTANT REMINDER ON VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. Dealers must ensure that every affected inventory vehicle has this campaign completed before delivery to consumers. Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete. Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com. |
Customer Letter Example (USA)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
NHTSA: 20V561
Subject: Compliance Recall 01E9 – Vehicle Build Status
Dear Volkswagen Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Volkswagen has decided that certain 2016-2018 model year Volkswagen vehicles potentially fail to conform to Federal Motor Vehicle Safety Standards. Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
Volkswagen has determined that certain internal use vehicles were sold without confirmation that they were built to Volkswagen’s series production standards and applicable regulatory requirements, and that documentation about their build status may be incomplete or could not be verified. It is also possible that modification(s) were made to these vehicles during their internal use period for which documentation may be incomplete or could not be verified.
Due to the potential inclusion of non-standard components, missing documentation of the actual build status and unknown potential for modifications made during internal use, Volkswagen cannot specifically identify a safety risk. However, if a vehicle does not meet all regulatory requirements, there could be an increased risk of a crash, fire, or injury.
What we will do, and what you need to do.
The recall remedy available to you is vehicle repurchase (buy back). Volkswagen will work directly with you to complete the vehicle repurchase process, FREE of charge.
Please contact Volkswagen Customer CARE at 800-893-5298 or reach out to us at www.vw.com/contact as soon as possible for more information and to begin the vehicle repurchase process.
Lease vehicles and address changes
If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card and mail it to us so we can update our records.
Can we assist you further?
If Volkswagen fails or is unable to complete vehicle repurchase (buy back) free of charge within a reasonable time, or if you should have any questions about this communication, please reach out to us using your preferred method of communication at www.vw.com/contact or by calling us at 800-893-5298.
Checking your vehicle for open Recalls and Service Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit www.vw.com/owners/recalls and enter your Vehicle Identification Number (VIN) into the Recall/Service Campaign Lookup tool.
If you still cannot obtain satisfaction, you may file a complaint with: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Volkswagen Customer Protection
SEOCONTENT-START
<MES AÑO>
<NOMBRE DEL CLIENTE>
<DIRECCIÓN DEL CLIENTE>
<CIUDAD ESTADO CÓDIGO POSTAL DEL CLIENTE>
El presente aviso corresponde a su vehículo: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
NHTSA: 20V561
Asunto: Campaña de llamada a revisión por motivos de cumplimiento 01E9: estado de
fabricación del vehículo
Estimado(a) propietario(a) de un vehículo Volkswagen:
El presente aviso se le envía de acuerdo con la Ley Nacional de Tráfico y Seguridad con Vehículos
Motorizados de EE. UU. Volkswagen detectó que ciertos vehículos Volkswagen modelos 2016 a
2018 podrían no cumplir con las normas federales de seguridad de vehículos motorizados. Nuestros
registros indican que usted es propietario(a) de uno de los vehículos afectados por esta medida.
Descripción del
problema
Volkswagen ha determinado que ciertos vehículos de uso interno se
vendieron sin confirmación de que se construyeron según las normas
de producción en serie de Volkswagen y los requisitos regulatorios
aplicables, y que la documentación sobre su estado de fabricación
puede estar incompleta o no se pudo verificar. También es posible que
se hayan realizado modificaciones a estos vehículos durante su período
de uso interno y que su documentación pueda estar incompleta o no se
haya podido verificar.
Debido a la posible inclusión de componentes no estándares, la falta de
documentación del estado real de fabricación y el desconocimiento
acerca de las modificaciones realizadas durante el uso interno,
Volkswagen no puede identificar de manera específica un riesgo de
seguridad. Sin embargo, si un vehículo no cumple con todos los
requisitos reglamentarios, podría haber un mayor riesgo de choques,
incendios o lesiones.
Lo que haremos y lo
que usted debe hacer
La solución de la campaña de llamada a revisión disponible para usted
es la recompra de vehículos (modalidad de rescate). Volkswagen
trabajará directamente con usted para completar el proceso de
recompra del vehículo de forma GRATUITA.
Llame al Centro de atención al cliente de Volkswagen al 800-893-5298
o escríbanos en www.vw.com/contact tan pronto como pueda para
solicitar más información e iniciar el proceso de recompra del vehículo.
Formulario No. F_3.4_AHQ-CP-C_060 Rev.2.0 01E9 EE. UU.
CAMPAÑA DE LLAMADA A REVISIÓN IMPORTANTE
Vehículos rentados y
cambios de dirección
Si usted es el arrendador y propietario registrado del vehículo
identificado en esta campaña, la ley exige que reenvíe esta carta de
inmediato al arrendatario por correo de primera clase en el plazo de
diez (10) días a partir de su recepción. Si cambió de dirección o vendió
el vehículo, complete la tarjeta prepagada de respuesta del propietario
adjunta y envíenosla para que podamos actualizar nuestros registros.
¿De qué otra forma
podemos ayudarlo?
Si Volkswagen no puede o no está en condiciones de completar la
recompra (rescate) del vehículo de manera gratuita y dentro de un plazo
razonable o si tiene alguna pregunta sobre esta notificación, póngase
en contacto con nosotros utilizando su medio de comunicación preferido
en www.vw.com/contact o por teléfono al 800-893-5298.
Verificación de
campañas de llamada a
revisión o de servicio
vigentes para su
vehículo
Si desea comprobar la elegibilidad de su vehículo para una reparación
en el marco de esta o de cualquier otra campaña de llamada a revisión
o de servicio, visite www.vw.com/owners/recalls e ingrese el número de
identificación del vehículo (VIN) en la herramienta Recall/Service
Campaign Lookup (Búsqueda de campañas de llamada a revisión o de
servicio).
Si aún no está satisfecho, puede presentar una queja a la siguiente dirección: The Administrator,
National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC
20590. También puede llamar a la línea directa y gratuita de seguridad de vehículos al 1-888-327-
4236 (TTY: 1-800-424-9153), o ingresar a https://www.safercar.gov.
Le pedimos disculpas por cualquier inconveniente que esto pueda haberle ocasionado; no obstante,
hemos tomado medidas para garantizar su seguridad y su continua satisfacción con el vehículo.
Atentamente,
Defensa del Consumidor de Volkswagen
*************************************************************************************************************
VOLKSWAGEN DEALER COMMUNICATION – USA
Ensure all dealership personnel are aware of this notice so they are able to address customer questions. Contact Warranty if you require
additional assistance. Direct press inquiries to Volkswagen Public Relations.
Volkswagen Customer Protection 01E9_DLR_LAUNCH
Repair Available – Compliance Recall 01E9 / Vehicle Build Status
This notice is for: Dealer Principal
General Manager
Sales Managers
Service Manager
Parts Manager
Service Consultant
Warranty Administrator
Technicians
Date: September 30, 2020
Issue: Volkswagen has determined that certain internal use vehicles were sold without confirmation
that they were built to Volkswagen’s series production standards and applicable regulatory
requirements, and that documentation about their build status may be incomplete or could
not be verified. It is also possible that modification(s) were made to these vehicles during
their internal use period for which documentation may be incomplete or could not be verified.
Volkswagen is not aware of any accidents or injuries as a result of this issue.
Repair: REMEDY AVAILABLE – October 01, 2020 / Vehicle repurchase (buy back) program.
See ELSA/ServiceNet for complete repair & claiming instructions
Check both the daily Campaign Open Inventory report and OMD for affected vehicles
in inventory. Verify OPEN status in ELSA on the day of repair.
Parts Department: No parts required – vehicle repurchase (buy back) program only.
Affected Vehicles Country Beginning
Model Year
Ending Model
Year Vehicle Vehicle
Count
USA 2018 2018 ATLAS 6
USA 2017 2017 E‐GOLF 2
USA 2018 2018 GOLF 1
USA 2017 2017 GOLF ALLTRACK 2
USA 2016 2018 PASSAT 12
*Counts reflect overall population; some vehicles may have already been repaired. Check Campaigns/Actions screen
in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign
inquiry & verification source.
Notes: Owner mailing – October 2020
U.S.A.: Loaner/rental coverage cannot be claimed under this action. However, loaner/rental may
be covered under the Alternate Transportation Program. Please refer to the Volkswagen
Warranty Policy and Procedures Manual for loaner claims information and reimbursement
details.
IMPORTANT REMINDER: VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS
New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor
vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this
notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers
must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable
Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety.
Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in
their inventory which are involved in a safety or compliance recall until the defect has been
remedied.
-END OF MESSAGE
SEOCONTENT-END
7 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| VOLKSWAGEN | ATLAS | 2018 |
| VOLKSWAGEN | EGOLF | 2017 |
| VOLKSWAGEN | GOLF ALLTRACK | 2017 |
| VOLKSWAGEN | GOLF R | 2018 |
| VOLKSWAGEN | PASSAT | 2016-2018 |
10 Associated Documents
ISSUED Owner Notification Letter(Part 577) – 01E9_VW Customer
RCONL-20V561-6575.pdf 97.207KB
ISSUED Owner Notification Letter(Part 577) – 01E9_VW Customer PRI
RCONL-20V561-8339.pdf 108.77KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V561-9572.PDF 211.248KB
Manufacturer Notices(to Dealers,etc) – Date: September 30, 2020 Repair Available – Compliance Recall 01E9 / Vehicle Build Status
RCMN-20V561-9556.pdf 196.157KB
Remedy Instructions and TSB
RCRIT-20V561-4668.pdf 241.003KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20V561-4237.PDF 211.147KB
Noncompliance Notice 573 Report
RCLRPT-20V561-9785.PDF 217.82KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V561-7903.PDF 211.322KB
Recall Acknowledgement
RCAK-20V561-5694.pdf 244.035KB
Recall Quarterly Report #4, 2021-3
RCLQRT-20V561-7525.PDF 211.428KB
Latest Recalls Documents
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Reset ABS/SRS/Transmission/Engine Lights】 More than an check engine code reader, OBDMATE OM901 obd2 scanner performs comprehensive diagnostics for the 4 most-used systems (ABS/SRS/Engine/Transmission). It quickly clears fault codes, turns off warning lights, read data stream and auto VIN.
- 【3.5" Handheld Scanner with 4 System Diagnose】 3.5" Super large TFT screen equipped displays an intuitive menu and clear readings of various sensors from ABS, SRS, ECM and TCM systems. It arrived with a silicone protective case and hard-shell carrying case, ensuring long-lived durability and drop resistance. The car diagnostic tool is plug-to-play designed, plug it and get diagnosis started without any batteries or updates required.
- 【One-Click I/M Readines&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether various emissions-related systems on the vehicle are operating properly. Help you get smog-check ready quickly. OM901 car scanner supports all essential OBD2 functions you need: read & clear codes, view freeze frame, read I/M readiness, retrieve VIN, live data stream (with graphing display), O2 sensor test, onboard monitoring mode, and EVAP leak test.
- 【Battery Voltage Check&DLC Pin Test】 It allows you to monitor battery health by testing current battery voltage. Plus, this obd2 diagnostic tool features DLC 16-PIN test to check current voltage of every pin.
- 【Automotive Scanner Diagnostic Kit】 The package comes with 1 car scanner, 1 USB-type c cable, 1 hard storage bag and 1 user manual(en). Free to update without any hidden fees. 5 languanges available in setting including English, French, Italian, German and Espanish. Valuable and Portable, making it a great tool kit for car owners, DIY enthusiasts, and professional mechanics.
- OBD2 SCANNER FOR ALL SYSTEMS – The INNOVA SD35 is a tablet-based OBD2 scanner designed for advanced diagnostics. Read and clear check engine light, ABS, SRS, and TPMS codes, plus test your car battery and alternator to prevent unexpected failures. Vehicle coverage may vary. Please use Innova’s Coverage Checker to verify compatibility.
- ALL-SYSTEM DIAGNOSTICS & LIVE DATA – Unlike basic code readers, this OBD2 scanner for all vehicles scans engine, transmission, ABS, SRS, and more. Get real-time live data, including RPM, fuel trims, temperature readings, and oxygen sensor performance.
- OBD2 TABLET WITH USER-FRIENDLY INTERFACE – This automotive scan tool features a high-resolution display, making vehicle diagnostics faster and easier.
- ADVANCED TPMS, OIL RESET & SERVICE FUNCTIONS – Perform TPMS sensor checks, oil light reset, and other service resets with ease This professional diagnostic tool provides comprehensive vehicle maintenance capabilities in one device.
- WIDE VEHICLE COVERAGE (1996 & NEWER CARS & TRUCKS) – This OBD2 scanner Bluetooth tablet is compatible with Toyota, Ford, Honda, Chevrolet, Nissan, Dodge, and more. However, feature coverage may vary. Please use Innova's Coverage Checker to verify coverage.
- ✔️【Professional SRS Reset for 1994-2003 BMW】 Designed specifically for classic BMW models (1994-2003). This B800 scanner reads & clears SRS airbag fault codes, turns off the warning light, and saves you a costly dealer visit. Confirmed compatible with: E36, E46 (EXCEPT 2001 330i), E34, E38, E39, Z3, and X5 (E53). NOT compatible with any BMW built before 1994 or after 2003.
- ✔️【Important: Two Different Connection Ports – Read Before Use】 To avoid “not working” issues, please note: For 1994–2000 BMWs (most E36, E34, Z3, early E39), the SRS diagnostic port is a round 20-pin connector under the hood. You MUST use the included 16-pin to 20-pin adapter cable. For 2000–2003 models (late E46, E39, X5), use the standard OBD-II port inside the cabin. Incorrect connection is the #1 reason for “incompatibility” reports.
- ✔️【Read & Clear Fault Codes in Minutes】 Quickly diagnose why your SRS light is on. The scanner accurately reads fault codes from airbag and seatbelt pretensioner systems. With one button press, clear the codes and reset the SRS warning light in seconds. No expensive dealer tools needed.
- ✔️【User-Friendly for DIYers – No Mechanic Required】 Easy operation with an intuitive button layout: ‘Enter’ to confirm, ‘Scroll’ to navigate. The clear LCD screen shows results instantly. Includes a step-by-step manual (revised for clarity) to guide you through the entire reset process.
- ✔️【Reliable Support with 1-Year Warranty】 We stand behind the quality of our B800 scanner. It comes with a 1-Year Hassle-Free Warranty. If you have any questions or need support, please contact us with your Order ID, and our dedicated team will assist you promptly.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
This product presentation was made with AAWP plugin.





