“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161706
Manufacturer Communication Number: A3019252053597_3
Summary
This bulletin contains repair instructions for when there is a leak from the lower bellhousing.
9 Affected Products
Vehicles
MAKE | MODEL | YEAR |
AUDI | A4 | 2018-2019 |
AUDI | A5 | 2018-2019 |
AUDI | A6 | 2019 |
AUDI | A7 | 2019 |
AUDI | ALLROAD | 2018-2019 |
AUDI | Q5 | 2018 |
Customer states:
- Oil is leaking from the vehicle.
Or
- There are transmission operation issues due to the lack of oil.
Workshop findings:
- ATF leaking from the service opening of the lower bellhousing.
Technical Background
Leaking through the bolt holes of the clutch cover.
Production Solution
Not applicable.
Service
Make sure that the oil leak definitely occurs in the bellhousing (clean transmission and apply talcum spray/leak detection spray to locate the concern on the service opening of the bellhousing).
If the oil leak is limited to the service opening in the bellhousing:
- Remove the transmission according to the repair manual.
- Remove the dual-mass flywheel from the bellhousing according to the repair manual.
- After removing the dual-mass flywheel clean the transmission housing and locate with talcum spray/leak detection spray the oil leak location on the clutch cover.
SEOCONTENT-START
Page 1 of 4
© 2019 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
30 Transmission leak from service opening of the lower bellhousing
30 19 25 2053597/3 June 25, 2019. Supersedes Technical Service Bulletin Group 30 number 19-24 dated May 15, 2019 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A5
2018
N000001 – N022333
Or
A000001 – A134620
0CL/0CJ Transmission
A5
2019
A000001 – A011778
0CL/0CJ Transmission
Q5
2018
000001 – 224450
0CJ Transmission
A4, A4 allroad
2018
N000001 – N018803
Or
A000001 – A999999
0CK/0CL/0CJ Transmission
A4, A4 allroad
2019
A000001 – A011041
0CK/0CL/0CJ Transmission
A6, A7
2019
000001 – 018158
0HL Transmission
Condition
REVISION HISTORY
Revision
Date
Purpose
3
–
Revised Warranty (Updated Labor Operations)
2
05/15/2019
Revised title
Revised Warranty (Updated Labor Operations)
1
01/18/2019
Initial publication
Customer states:
Oil is leaking from the vehicle.
Or
There are transmission operation issues due to the lack of oil.
Workshop findings:
ATF leaking from the service opening of the lower bellhousing.
Page 2 of 4
© 2019 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Background
Leaking through the bolt holes of the clutch cover.
Production Solution
Not applicable.
Service
Make sure that the oil leak definitely occurs in the bellhousing (clean transmission and apply talcum spray/leak
detection spray to locate the concern on the service opening of the bellhousing).
If the oil leak is limited to the service opening in the bellhousing:
Remove the transmission according to the repair manual.
Remove the dual-mass flywheel from the bellhousing according to the repair manual.
After removing the dual-mass flywheel clean the transmission housing and locate with talcum spray/leak
detection spray the oil leak location on the clutch cover.
If the leak cannot be precisely located with the previous check, perform the following steps:
1. Remove the lower bolt of the cover on the passenger’s
side of the plastic cover (Figure 1 and Figure 2).
Figure 1. Bolt location.
Figure 2. Leak location.
Page 3 of 4
© 2019 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
2.
If there is oil residue in the bolt hole, continue with this TSB repair. If there is no oil residue in the bolt hole, create an Audi Technical Assistance Center contact with pictures of the leak and a diagnosis log attached. Then contact Audi Technical Assistance Center for diagnosis assistance.
If the leak is from the bolt of the clutch cover with the transmission housing, proceed as follows:
1.
Remove all bolts of the clutch cover.
2.
Clean the bolt holes.
3.
Install 12 new bolts for the clutch cover with the part number WHT 002 459 C:
Tightening torque: 12Nm + 90°.
The tightening sequence is a diagonal pattern as described in the repair manual.
4.
Reinstall the dual mass flywheel into the transmission per the repair manual.
5.
Reinstall the transmission into the vehicle per the repair manual.
6.
Check and adjust the transmission ATF level.
7.
Road test for proper operation.
Warranty
Claim Type:
110 up to 48 Months/50,000 Miles.
If the vehicle is outside any warranty, this Technical Service Bulletin is informational only.
Service Number:
3059
Damage Code:
0050
Labor Operations:
Check transmission (locate oil leak)
3435 0199
30 TU
Remove and install transmission
3435 19XX
See SRT
Remove and install the dual-mass flywheel
1362 19XX
See SRT
Clean and powder check the transmission
3435 2999
20 TU
Remove and Replace bolts for clutch cover (replace bolts, clean holes)
3059 0999
40 TU
Diagnostic Time:
GFF
0150 0000
Time as stated on diagnostic
Page 4 of 4
© 2019 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
protocol (Max 50 TU)
Road test prior to service procedure
0121 0002
10 TU
Road test after service procedure
0121 0004
10 TU
Claim Comment:
As per TSB #2053597/3
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Always check with your Parts Department and/or ETKA for the latest information and parts bulletins.
Part Number
Part Description
Quantity
WHT002459C
Hexagon Socket Bolt
12
See ETKA
Fasteners, Bolts, Nuts, and Screws as needed per the Repair Manual
See ETKA/ELSA
Additional Information
All parts and service references provided in this TSB (2053597) are subject to change and/or removal.
©2019 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
SEOCONTENT-END
2053597/3
June 25, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161706
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161706-0001.pdf
- SUITABLE FOR USE IN 95% of ATF VEHICLES in operation with US registered light duty applications.
- HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
- IMPROVE DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs, Superior anti-shudder performance
- ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations
- FULL SYNTHETIC FORMULA protects against engine breakdown better than conventional fluids
- Main Usage: As a connector for car oil pan ATF filling tool;
- Compatibility: for VW transmission DSG, Thread M24 x 1.5;
- Material: Aluminum alloy with anodized, Silica gel;
- Fitment: For VW DSG trans Beetle/CC/Eos/Golf Alltrack/GTI/Golf R/Jetta/Passat/R32 2004-2020 some models, and for Audi DSG trans A3/S3/TT/TT Quattro 2004-2019 some models. For details, please refer to the description below;
- Specifications: Please refer to the picture of the upper left corner for detail size.
- Main Usage: As a connector for car oil pan ATF filling tool;
- Compatibility: for VW and for Mini Cooper transmission AISIN 09G, Thread M10 x 1.0;
- Material: Aluminium Alloy, Surface anodized;
- Fitment: for VW Golf 2.5L 2004-2014, Jetta 2.0L/2.5L 2005-2014, Beetle 2.5L 1998-2014, Passat 2.5L/3.6L 2005-2015, for MINI Cooper 1.6L (6 Speed trans GA6F21WA/TF60-SN) 2007-2016. For details, please refer to the description below;
- Specifications: Black, Please refer to the picture of the upper left corner for detail size.
- Trusted formulations that surpass all major Dual Clutch (DCT) OEM requirements; compatible with all DCT transmissions including the German DSG for VW/Audi, Mercedes Benz, Porsche, BMW; exceeds requirements for and is compatible with very advanced Ferrari, Bugatti transmissions
- Specifically formulated for and compatible with use in the DPS6 power shift twin dry-clutch transmission requiring Ford WSS-M2C200-D2/ XT-11-QDC specifications; Ford BMW, Audi/VW DSG, Mercedes Benz, and many others
- Exceptional gear grip and frictional stability; optimal frictional coefficient and fluidity for super-fast, flawless shifting; exceptionally low gear wear and improved transmission performance across the board
- Extremely long fluid life (300,000 miles or more) and qualifies for lifetime fill unless otherwise specified by OEM
- Flawless shifting characteristics and zero slippage; total compatibility with all types of seal materials; remains fluid down to -60F temperatures
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Free to Use: The sealed body and pump design create a pressurized filling system for fast and safe fluid delivery. ATF fluid pump tool transfers 70ml per stroke, holds up to 7.5L oil to meet multiple refueling needs at once. This manual transmission fluid pump tool can be used anywhere you need especially outdoors, no place limitation or reliance on air compressors. For engine oil, gearbox oil, lubricating oil, power steering fluid, brake fluid, etc.
- Portable & Removable: Manual transmission oil change pump is composed of pump body, press handle and round base, convenient for easy carry and quick organization. Ball shape protects container from deformation. Lever adopts ergonomic design for untiring labor-saving grip and has blue soft pads wrapped for added friction and anti-slip use. Built-in transparent delivery hose came with quick coupler to get connected easily and adjustable shut-off valve allowing On / Off 90 degree rotation.
- One-man Manual Operation: Transmission fluid transfer pump features long-lasting leakproof sealing performance, offering you a smoother, easier hand operated pumping action. Efficient and cost-effective; Reusable and reliable. Unscrew the drain plug to let waste oil out(Best to prepare a recycling container in advance) and refill transmission fluid fill pump, continuously press the lever to transfer oil into the ATF system after connection. No leaks or splashes.
- ATF Adapters: There are 15 specific ATF adapters included in this ATF fluid pump kit, work as connectors for car oil pan ATF filling tool and perform transmission fluid refill service for the ATF filler system. Multiple adapters constructed from hardened steel for maximum strength and longevity. Black electrophoretic finish for rust and corrosion resistance. Kit is suitable for Ford, BMW, Nissan, VW, Audi, Toyota, Volvo, Porsche, Benz, Hyundai, Infiniti, Lexus and etc.
- Thoughtful Service: We are always trying hard as we can to provide customers with better quality products and services. Help you to complete the satisfactory shopping experience and tool selection. The item will be packed well to prevent the breakage along the way. If you have any questions, please feel free to contact us. Goods purchased in this store is refundable within 30 days as long as it's intact, and we provide 12-month after-sales quality support.
- 【Compatibility】Transmission fluid ATF fill adapter Compatible with Volkswagen Audi CVT, replacement part number: VAS5162-1, thread: M22 x 1.5.
- 【Function】Transmission fluid fill adapter is used as the connector for the ATF filling tool of the automobile oil pan. For use with ATF filling systems.
- 【Easy Installation】Screws the transmission filler tool into the oil drain plug hole, just push the hose to the end to pump the transmission oil in. No quick release is required, the engine should be running while the transmission fluid is being filled
- 【Premium Quality】 This the automatic transmission service fluid oil filling filler adapter is mainly made of high quality aluminium alloy and is 100% brand new, never used or installed. The materials used are not prone to rust or oil corrosion. The threads fit the transmission drain perfectly without any leaks.
- 【Warranty Service】We provide 1 year warranty. If you have any questions, please feel free to contact us, we will reply within 24 hours.
- [HIGH QUALITY]: TOP quality oil filler adapter, constructed of hard steel for long lasting durability and reliability. Direct replacement for a proper fit and easy installation, meets or exceeds OEM standards, 100% tested before shipping.
- [REFERENCE PART NUMBER] VAS6262-1 VAS6262-2 VAG1924/1 VAS5162-1 722.9.
- [FITMENT] These filler filling transmission adapter replacement for VW Audi 09G 01J 722.9 CVT DSG ATF Benz 722.9.
- [PACKAGE INCLUDES] 5Pcs Transmission Fluid Oil Filler Adapter kit (1Pc* Hook Tube + 1 Pc 09G Transmission Adapter + 1Pc 01J CVT Adapter +1Pc 722.9 Adapter + 1PC DSG Transmission Adapter).
- [SERVICE GURANTEE] Order transmission fluid fill adapter from gohantee, we offer 12 months warranty, if you have any problems or concerns, please kindly send us mail any time, we are always here to provide you 100% satisfied after-sale service.
- 5PCS ATF Adaptor Set Automatic Transmission Fluid Oil Filling Filler Adapter Replacement Tool Compatible with VW Audi 09G 01J 722.9 CVT DSG ATF Benz 722.9
- The transmission oil fill adapter kit is used to connect the automobile oil pan & the ATF filling tool, and is used in conjunction with the ATF filling system.
- [REFERENCE PART NUMBER] VAS6262-1 VAS6262-2 VAG1924/1 VAS5162-1 722.9.
- ATF104 VAG1924 For VW AUDI PORSCHE
- ATF105 VAS6262-2 For VW AUDI MINI COOPER. Size:M10X1.0
Last update on 2024-06-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.