NHTSA ID Number: 10161638
Manufacturer Communication Number: TT871101
Summary
Directions to assist in performing basic settings for the ac control module
27 Affected Products
Vehicles
MAKE | MODEL | YEAR |
VOLKSWAGEN | BEETLE | 2011-2019 |
VOLKSWAGEN | BEETLE CONVERTIBLE | 2011-2019 |
VOLKSWAGEN | JETTA | 2011-2019 |
Technical Background
After manual –J301– A/C Control Module is replaced, fault 00898-005 “Activation A/C Compressor No or Incorrect Basic Settings” may be stored. The GFF test plan does not perform Activation A/C Compressor Basic Settings.
Service
To perform Basic Settings follow steps below:
2011- 2015 Vehicles:
With the engine OFF and the Ignition Key removed:
- Set the Blower on position 1 or 2.
- Set Airflow direction to “Vent”.
- Set Temperature to “Full Cold”.
- Start the engine.
- Press and Hold the Defrost and A/C buttons at the same time for 5-10 seconds until the Defrost, A/C, and Recirc buttons are illuminated.
- Switch the engine OFF and remove the Ignition Key.
- Restart the Vehicle and Recheck all functions before returning the vehicle to the customer.
2016-2019 Vehicles:
Using the scan tool navigate to:
- Control Module OBD, Address 08, Adaptation, enter 9 for the Channel, and enter Value 1.
- Select apply and retest operation.
SEOCONTENT-START
Technical Tip Transaction No: 2030606/13
87-11-01TT – Manual A/C Control Module Basic Release date: 6/21/2019
1
Condition
ATTENTION:
THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN.
TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING.
Applicable Vehicles
Model(s)
Year
Eng. Code
Trans. Code
VIN Range From
VIN Range To
Jetta, Beetle, Beetle Convertible
2011-2019
All
All
All
All
Revision Table
Instance Number
Published Date
Version Number
Reason For Update
2030606/13
6/21/19
87-11-01TT
Add additional model year applicability.
2030606/1
3/18/11
87-11-01TT
Original publication.
Technical Background
After manual -J301- A/C Control Module is replaced, fault 00898-005 “Activation A/C Compressor No or Incorrect Basic Settings” may be stored. The GFF test plan does not perform Activation A/C Compressor Basic Settings.
Service
To perform Basic Settings follow steps below:
2011- 2015 Vehicles:
With the engine OFF and the Ignition Key removed:
Set the Blower on position 1 or 2.
Set Airflow direction to “Vent”.
Set Temperature to “Full Cold”.
Start the engine.
Press and Hold the Defrost and A/C buttons at the same time for 5-10 seconds until the Defrost, A/C, andRecirc buttons are illuminated.
Switch the engine OFF and remove the Ignition Key.
Restart the Vehicle and Recheck all functions before returning the vehicle to the customer.
Technical Tip Transaction No: 2030606/13
87-11-01TT – A/C Control Module Basic Release date: 6/21/2019
2
2016-2019 Vehicles:
Using the scan tool navigate to:
Control Module OBD, Address 08, Adaptation, enter 9 for the Channel, and enter Value 1.
Select apply and retest operation.
Additional Information
© 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on
the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make
changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
SEOCONTENT-END
Transaction No: 2030606/13
Release date: 6/21/2019
https://www.nhtsa.gov/recalls?nhtsaId=10161638
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161638-0001.pdf
MC-10161638-0001
- 👍➤2023 New Upgraded All-in-one Scanner, Upgraded Ver. of XTOOL D7➤ As XTOOL 2023 new upgraded automotive scanner targeted for professional mechanics, D8 upgraded with ✅Bi-Directional Control✅OE All Systems Diagnosis, ✅38+ Special Functions, ✅Up to 8-In-1 Graphing & Export Data as CSV file, ✅CAN FD, ✅New launched PMI function for Ford, Lincoln, Mazda, ✅Advanced ECU Coding for VW, Audi, Skoda, ✅ADAS Calibration(software unlocked), ✅ECU Configurations, etc. Note: Please check compatibility before order.
- 👍➤Advanced ECU Coding & Personalized Settings ➤ XTOOL scanner D8 equipped with ECU Coding(for VW/AUDI/SKODA ONLY) and custom configurations are designed to unleash the hidden functions for BMW, for Ford, for Mazda, for VW/Audi/Skoda, for Toyota/Lexus/Scion, for Lincoln. You can activate the higher-level car functions and disable any annoying features like disable the seat belt buzzer, customize extra options such as winding the windows down with the remote fob. ✅New launched PMI function for Ford, Lincoln, Mazda supports copy data into new modules.
- 👍➤OE-Level All Systems Diagnostic & Bi-Directional Control ➤XTOOL D8 professional diagnostic scan tool can access all available vehicle modules for read/clean DTCs, view live data, freeze frame, ECU info and perform bi-directional control to command the components to pinpoint faults, such as Fuel Trim Reset, Fuel Composition Reset, VGT Turbo Calibration, Window/Mirror/Door Lock Test, Turn on/off the radiator fan, Modulate the throttle, Turn on/off the lights, sound horn, etc.
- 👍➤ 38+ Special Functions for Mechanics/Workshop ➤ XTOOL D8 diagnostic tool cover almost all available Services including Oil Reset, EPB, SAS, BMS Reset, ABS bleed, Throttle Reset, VGT Learn, Air Suspension, Injector Coding, Key Programming, Power Balance, Headlight, Transmission Adaptation, Fuel Trim Learn, HVAC Control Module Calibrate, Zero Point Calibration, Language Change, A/F Settings, Stop/Start Reset, Crankshaft Sensor Relearn, TPMS, PMI function and etc. NOTE: Services do NOT work on all cars.
- 👍➤ Powerful Hardware Configuration ➤ D8 auto scan tool possess with Android system, Quad-Core 1.8GHz CPU Processor, 2GB RAM & 64GB ROM, which greatly increased the speed of running multiple task. With 10,000mAh stronger rechargeable battery, 2.4GHz&5GHz Dual-Frequency Wi-Fi, 4X faster transmission rate, 8MP Camera and built-In Speaker, Microphone, supports external sound playback. Perfect choice for advance DIY, auto repair shop, garage, car dealer and home mechanic.
- 🎁【Free TPMS Activation Tool】: Just click " Contact seller " to get a FREE TPMS Activation Tool which works for GM cars. Best useful gift idea for your grandfather, father, husband, brother or boyfriend. 👍We are proud to tell that LAUNCH x431 PROS V+ has been recommended as " Best Overall Car Diagnostic Scanner " by Amazon editors, and also highly recommended by YouTube machinists. 2 YEARS Free WiFi Upgrade. 5 Years Warranty. Any problem,please reach us via 📩 launch-aftersales @ outlook. com.
- 👍【2023 Top Professional Car Scanner Diagnostic for All Cars】LAUNCH X431 PRO V+ obd2 scanner add more functions,No Extra Software Fee➤Free VAG Guided Function➤Supports AutoAuth for FCA SGW➤Online Coding➤Nox Sensor Reset➤Setting & Changeover (adblue reset, unlock the engine after a collision, cancel ABS driving test, and more) for Benz➤Modification for BMW➤Flash Hidden Functions ➤Anti-theft IMMO Service➤Power Balance➤Customization➤ Parameterization,for worldwide vehicles,and keep growing.
- 👍【Bi-Directional(Active Test)+Online Coding+Over 35 Reset Services+ALLSystem Diagnosis+Adaptation+Initialization+ Matching】LAUNCH Scanner X431 PROS V+scan tool Elite also support: KEY programming, Gear/ SAS/ EPB/ TPMS/ IMMO/ BMS/ ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.➤You can get 100+ advanced special functions under the"vehicle brand"menu>"system" > "special functions".
- 👍【2023 Better Hardware +25 Languages Free to Use】Launch X431 PROS V+ car scanner Updated and Optimized hardware ➤Android 9.0 System➤2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version➤32+128gb (EXTENDABLE) storage➤CPU Processor Updated from 1.4GHz to 2.0 GHz quard-core. greatly increased the speed of running multiple task➤8XFAST AUTO VIN technology➤25 language: English, French,Spanish,German,Russian,Korean,Japanese,Portuguese, Italian,Polish,Dutch,Chinese etc.
- 👍【200000+ Vehicles Coverage + 5 Years Warranty + 2YEARS Free Update】LAUNCH scanner X431 PROS V+ car scanner supports full OBD1 and OBD2 protocols, covering Asian, European, American, Russia, Malaysia, India vehicles.🚩provides 5 YEAR 100% worry-free after-sale service with professional supporter 24H/7D online.90-days-money-back if has any problem.🚩Conact seller to get Free Gift 🚩Send VIN number to 🚘 launch-aftersales @ outlook. com 🚘 to check compatibility before purchase !
- [J2534 COMPLIANT] - The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications
- [FULLY VALIDATED BY TOP 6 OEMS] - Mastertech II has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus
- [PRE-CONFIGURED] - The pre-configured wireless and wired connections make it quick and easy to connect to a vehicle from your PC (requires PC compliant with OE specifications and software)
- [RIGHT TO REPAIR] - Supports 'Right to Repair' (R2R) initiatives
- [COMPREHENSIVE KIT] - Kit includes: VCI, WiFi adapters (wireless PC to VCI), J1962 Cable (connect to vehicle), USB cable (connect to PC for firmware updates and setup), and Quick Start Guide
- 【WARM NOTICE】👉👉LAUNCH Tech. USA is one of the dealers located in America, but they won't provide after-sale service for online products. Please contact us via aftersale-launchdirect@outlook. com for any after-sales issues if you buy it from us. 👉For now, LAUNCH X431 PAD VII only supports online programming for BENZ & BMW in the U.S. Region, but you can download the manufacturer’s programming software to program other car brands using Smartlink C J2534 tool.
- 🥇【LAUNCH X431 PAD VII, 2023 Top Diagnostic Scanner】 The latest all-around scan tool, upgraded from LAUNCH X431 PRO5/PADIII/V+ 4.0 and rival OEM car scanners. High-end ECU programming backup/restore for 30+ car brands (the most on market), ECU/SCN coding, J2534/RP1210/D-PDU/Do-IP/CANFD, topology mapping, 50+ service functions, guided functions, highest hardware configuration … with 99.99% worldwide car coverage. LAUNCH X431 PAD VII is a worthwhile investment for repair shops and mechanics.
- 【Huge-Upgraded ECU Programming & Coding】 Beyond the reach of most competitors, LAUNCH X431 PAD VII features ECU Programming working on upmost 30+ car brands: 1) Backup/Restore data from original ECUs, you won't find this in any other tools; 2) Programming offline or online, manual or automatic to meet more needs; 3) R-etrofit, e.g. replace halogen lamp. 4) ECU Upgrade, e.g for Fuel quality d efect firmware. Coding features: Recode ECU Data, Personalization, and loads of more.
- 【LAUNCH X431 PAD VII, 50+ Services & Topology】 LAUNCH X431 PAD VII bidirectional scan tool has 50+ service functions, like Oil Reset/ABS Bleeding/Injector Coding/AdBlue Reset … to win more business. Topology mapping checks DTCs and all-system communication status visually in LAUNCH X431 PAD VII top obd2 scanner. The actuation test detects problems 5X faster than tearing autoparts apart. Multiple protocols: J2534, RP1210/D-PDU (for HD cars), Do-IP (BMWs E/F, Land Rover/Jaguar), CANFD (new GM).
- 【Intelligent Diagnose & Guided Functions】LAUNCH X431 PAD VII scan tool has Intelligent Diagnose to free you from tedious works: easily get VIN data, guide you to vehicle information page without menu selection, and display all diagnostic records. Guided Function (for V.A.G) allows on-screen prompts for proper diagnostics, simple & convenient. Pin Detection allows detecting DLC pins voltage and accessing protocol types to troubleshoot your DLC port.
- 🔔【Easy to Use--Work out of box】+【FOXWELL 2023 New Version】 FOXWELL NT604 Elite scan tool is the 2023 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🍎【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your lovely cars and pinpoint the problem for you, which saves time and money for you. It will t-urn off the warning light for you after you fix the problem, making you to know more about your cars and do your own repair.
- 🥑【2 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100 USD), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🍓【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🥝【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 👍👍【More Versatile & POWERFUL ,2023 ADDED ADVANCED OE-LEVEL FUNCTIONS】In 2023, LAUNCH X431 PRO3S+ adds more OE-Level features to meet your expectations, such as ✔️ECU Online Coding (compatible with VW, Audi, Skoda, Seat) ✔️ADAS Calibration (calibrate camera-based & radar-based driver assistance systems) ✔️VAG Guided Functions (compatible with VW,SKODA,SEAT) ✔️AutoAuth for FCA SGW (compatible with Jeep, Alfa Romeo &Fiat after 2017)✔️Diesel Repair (use with LAUNCH X431 Heavy Duty).
- 👍👍【Support Wifi Printer/ Videoscope/ TSGUN/ X431 PROG3/ ADAS Moblie】In 2023, LAUNCH X431 PRO3S+ has been upgraded to support extended modules, to give your car more comprehensive inspections. ✅Videoscope (Check unseen parts of engine, fuel tank system, etc) ✅X431 TSGUN(activate all sensors, tpms relearn, the program only Launch Sensors); ✅X431 PROG3(VAG Group Above 3.5 IMMO); ✅X431 Printer (Print out diagnostic data/ reports) ✅X431 ADAS Moblie/ADAS PRO.
- 👍👍【Optimized Hardware Configuration+25 Languages+OBDI&OBDII Connectors and Cables 】LAUNCH X431 PRO3S+ scanner with 9.0 Android-based with large 10.1 HD IPS(1920 * 1200),7000mAh rechargeable battery(up to 20+ hours battery)2.4GHz&5GHz dual-band Wi-Fi, the transmission rate is 4 times faster than the old version. 32+128gb(expandable)storage to save more vehicle documents and customer data. CPU processor updated from 1.4GHz to 1.8GHz eight-core to perform diagnostics quickly and efficiently
- 👍👍【Best Gift Idea】【Bidirection Control+Online Coding+Over 35 service Functions+Active Test】Perfect gift choice for your father, husband, son or brother. LAUNCH X431 PRO3S+ support Key programming, Matching, SAS/TPMS/GEAR/EVAP/IMMO/EDB/AFS/BRAKE/INJECTOR,Gives you the ability to use professional level relearn procedures to complete repairs or maintenance. It supports Remote Diagnostic, diagnostic feedback and respond, Data Stream record and playback, Vehicle Health Report.
- 👍👍【All System Diagnostics for 10000+ Vehicle Coverage+User-friendly 25 Languages Design】Support diagnosis functions such as reading fault codes, clearing fault codes, reading data streams, action testing, special functions, coding, matching,etc,which can be realized Car fault diagnosis for almost models and all systems. ✅Full localized 25 Languages free to use to choose your native language without encountering any sort of language barrier.
- Featured with a brand-new upgrade system, X-431 PRO5 is newly designed for All Makes, All Models, and Full system diagnosis and assists the technician to make the vehicle diagnosis and repair easier at all skill levels.
- [J2534 ECU Reprogramming Tool, No IP Limitation]: LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 V+, PROS V1.0, PAD3. With the SmartBox3.0 can download the OEM software from the manufacturer’s server for free.
- [3 IN-1 FREE J2534 ECU Programming Device: LAUNCH X431 PRO5 support all new J2534/DOIP/CANFD protocols to access data and OE programming downloads for most Car; Support DC9-36V for HD Vehicle ( No NEED buy HD Module, SAVING $900+.)
- [ One-stop Intelligent Tools]: Workshop level scan tool X431 PRO5 with the repair fix solutions database, Code Assist, Repair Tips,Component Measurement, TSB, Relevant Cases,DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair.
- [50+ Reset, Continuously Updated Reset Functions]: 50 resets reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to regeneration, initiation, matching, etc.
- 🏆【2023 Most Worth Buying Bluetooth Automotive Scanner Diagnostic Tool 】ANCEL V6 PRO+ obd2 scanner is the most powerful Bluetooth car diagnostic scanner for its affordable price! support🔥Bi-Directional Control🔥25+ Service Functions🔥key programmer🔥OE-Level Full Systems Diagnosis🔥2 Years Free Update🔥Bluetooth Wireless Connection 🔥Auto VIN&Auto Scan🔥Regularly Updated New Features&Fixed Issues🎁Extra Savings Free 'Add both to Cart' Gifts. 📣All Special function above is car-specific.
- 🏆【Full Bi-Directional Control 】Whether you're a professional auto technician, home mechanic or DIY car enthusiast, an accurate and fast bi-directional scanner is a must! ANCEL V6 PRO+ bidirectional scan tool can send commands and receive info from the vehicle’s control modules, run tons of actuation tests, save money on car repairs and save time when performing complex maintenance and repairs. V6 PRO+ will be the most trustworthy bidirectional scanner you can't miss.
- 🏆【 25+ Special Service Functions】ANCEL V6 PRO+ bluetooth car service reset tool covers almost all commonly used services include Active Test, key programmer, Oil Reset, ABS Brake Bleeding, EPB Service, SAS, DPF, BMS Reset, Throttle Reset, Injector Coding, Headlight, Transmission,A/F Settings, GEAR, NOX Set, PUMP, Seat Set, Stop/Start Reset, Tire Set, UREA Set,Sunroof, etc. ANCEL V6 PRO+ scanner automotriz is your best investments as it can save you much maintanence fee, ast least $300/YEAR.
- 🏆【Car Key Programmers】If your car key is lost or the key fob is broken, getting a replacement can be a hassle and cost you much money. ANCEL V6 PRO+ Bluetooth key fob programming tool allows you to Add a key/ new key programming, All keys replaced, Read keys from IMMO memory, Key cloning, etc., no subscription fees, save you both time and money. ❗Only some specific vhicles available now, pls confirm before purchase. more cars with key programmer coming soon later, get just by FREE UPDATE!
- 👍【All Systems Diagnostics+AUTO VIN + AUTO SCAN 】ANCEL V6 PRO+ Bluetooth car scanner diagnostic for all cars features with AutoVIN & Auto Scan functions to quick and accurate identify your vehicles, perform a comprehensive scan of all available systems, such as the abs/srs/engine/transmission/BCM/BMS/TPMS/ECM/TCM systems, etc., to perform dealer level diagnosis: read/clear DTCs, retrieving ECU info. show various live stream datas. ❗AutoVIN is car-specific, not available for all vehicles.
- 🌻【Accurate & Intuitive All System Diagnosis】This obd scanner diagnostic tool checks not only the basic system like ABS/SRS/Engine/Transmission, but also diagnose thoroughly on all available systems to read/clear codes, turn off flashing warning lights on dashboard like EPB/SAS/ESP/Suspension/Headlamp/Car radio/Center lock etc.. This foxwell scanner is easy to use and friendly to novice and amateur mechanic, even for those who are not familiar with car diagnostic field.
- 🔥【Powerful 5 RESET FUNCTIONS】+【Get Work Done Efficiently】New Ver. obd2 scanner NT624 Elite ADDS NEW SPECIAL FUNCTIONS--ABS Bleeding/SAS Calibration/Throttle Matching at the base of EPB&Oil Reset. Before the trip to mechanic, the vehicle code reader can do deeper diagnosis for ABS/SAS/Throttle/Oil/EPB system and react with accurate data in minutes. Compared with auto repair, the vehicle scanner nt624e can save some unnecessary repair fee and long repair time.
- 🌈【EPB Reset & Oil Light Reset】NT624elite scanner for car provides the most commonly-used functions---Oil Light Reset for 49 car makes, Electronic Park Brake(EPB) service for 42 car makes. The nt624elite car diagnostic tool for all cars performs service and maintenance including reset oil light, deactivation and activation of brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, ect.
- 🍁【Comprehensive Applicable People Range】 +【No Subscription fee】The obd2 scanner diagnostic tool takes the user-oriented and hot keys design, so the foxwell nt 624e code reader is easy to operate and do quick scan for home mechanic, DIYER, novice, amateur mechanic, dealer and auto repair shop. Besides, this car scanner is free to update lifetime, no need to pay extra 200+$ software fee every year. It can help you save time & thousands of dollars in diagnosis and auto repair!
- ✅【Wide Car Compatibility + Fantastic Auto VIN】The NT624elite diagnostic scan tool for all vehicles can diagnose over 60(1000+vehicles)worldwide mainstream car makes(USA/ASIA/EUROPE) of their available car systems, find the root cause of warning light and reset it via 5 popular reset service. With the featured auto VIN scan, the car code reader can read accurate vehicle info and help you resolve compatibility issues. Easily, so you don’t need to put the VIN manually.
- 🎁 Conact Seller to Get Free Gift 🎁 Same Function as LAUNCH CRP123E 🎁 Fast Delivery by Amazon🎁 Lifetime Free Update🎁 5 YEARS Warranty.
- [Engine/ABS/SRS/Transmission Diagnostic Tool]----The crp123 obd2 scanner is perfect balance of power and affordability, providing the ability to view preset, or user defined, live data streams for ENGINE, AT, ABS and SRS data, the ability to graph, record, replay and print data, read and resets codes for engine/abs/srs/transmission system.
- [Full OBDII Functions Code Reader]----LAUNCH CRP123 scan tool supports all 10 modes of OBDII standard to ensure complete, accurate, system diagnosis. Read and Clear DTCs, do smog tests , I/M readiness and O2 sensor tests, Mode 06 EVAP system test, Mode 08 on-board test component test. And OBDII Code lookup tool and acronym database to assist and speed diagnosis and repair time.
- [Live Data Graphing + Read/Record/Playback Data stream + Lifetime Free Update] Live Data Graphing ,more intuitive to know your vehicle’s problem. Large size Color Screen; Print Function; Print the diagnose result easily; With user manual and register & update tutorial video uploaded in the link by us, you can look up it anytime by ONE-CLICK. Lifetime free update by windows.
- [Extensive Vehicle Coverage + 9 Languages]----The LAUNCH CRP123 reads data from ENGINE, TRANSMISSION, ABS and SRS systems from Asian, US and European manufacturers. Coverage includes Suzuki, Honda, Mitsubishi, Nissan, Toyota, Mazda, Hyundai, Kia, Subaru, Infiniti, Lexus, Acura, Isuzu, Ford, GM, Chrysler, Benz, BMW, VW, Opel, Volvo, Fiat, Land Rover, Seat, Skoda, Audi, Porsche, Saab, Jaguar and many others. Support 9 different languages.
Last update on 2023-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.