| “This site contains affiliate links for which OEMDTC may be compensated” |
March 6, 2020 NHTSA CAMPAIGN NUMBER: 20V135000
Brake Booster Pressure Rod Incorrectly Installed
An increased actuating force or a disconnected input rod may affect braking, increasing the risk of a crash.
NHTSA Campaign Number: 20V135
Manufacturer Volkswagen
Group of America, Inc.
Components SERVICE BRAKES
Potential Number of Units Affected 732
Summary
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2019 Arteon vehicles. The electronic brake booster pressure input rod may be installed incorrectly, possibly causing an increased actuating force or a disconnected input rod. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 135, “Light Vehicle Brake Systems.”
Remedy
Volkswagen will notify owners, and dealers will inspect and correct the mounting of the pressure rod only or replace the electronic brake booster and mounting of the pressure rod, depending of the inspection results, free of charge. The recall began April 3, 2020. Owners may contact Volkswagen customer service at 1-800-893-5298. Volkswagen’s number for this recall is 47P8.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Volkswagen has a Recall
Advance Notice – Safety Recall 47P8 / Electronic Brake Booster Input Rod
| This notice is for: |
| |||||||||||||||
| Date: | March 16, 2020 | |||||||||||||||
| Issue: | Due to a possible manufacturing error, the electronic brake booster pressure input rod may not be correctly attached to the brake pedal. This may lead to a reduced pedal ratio and to an increased actuating force or to a disconnection of the pressure input rod. Additionally, in the event of a failure of the 12V power supply, the brake performance may be impaired due to the reduced pedal ratio and the resulting increased actuation force. An increased actuating force or a disconnected input rod may lead to abnormal brake behavior and may increase the risk for a crash. | |||||||||||||||
| Repair: |
| |||||||||||||||
| Affected Vehicles |
*Counts reflect overall population; some vehicles may have already been repaired. Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign inquiry & verification source. | |||||||||||||||
| Notes: |
New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied.
|
-END OF MESSAGE-
Ensure all dealership personnel are aware of this notice so they are able to address customer questions. Contact Warranty if you require additional assistance. Direct press inquiries to Volkswagen Public Relations.
Volkswagen Customer Protection
47P8_DLR_ADV
Repair Available – Safety Recall 47P8 / Electronic Brake Booster Input Rod
| This notice is for: |
| |||||||||||||||
| Date: | March 23, 2020 | |||||||||||||||
| Issue: | Due to a possible manufacturing error, the electronic brake booster pressure input rod may not be correctly attached to the brake pedal. This may lead to a reduced pedal ratio and to an increased actuating force or to a disconnection of the pressure input rod. Additionally, in the event of a failure of the 12V power supply, the brake performance may be impaired due to the reduced pedal ratio and the resulting increased actuation force. An increased actuating force or a disconnected input rod may lead to abnormal brake behavior and may increase the risk for a crash. | |||||||||||||||
| Repair: |
| |||||||||||||||
| Parts Allocation: | There will be no parts allocation
DO NOT ORDER FOR STOCK!
| |||||||||||||||
| Affected Vehicles |
*Counts reflect overall population; some vehicles may have already been repaired. Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign inquiry & verification source. | |||||||||||||||
| Notes: |
U.S.A.: Loaner/rental coverage cannot be claimed under this action. However, loaner/rental may be covered under the mobility program. Please refer to the Volkswagen Canada: Loaner/rental coverage cannot be claimed under this action. Please refer to the Volkswagen Ensure all dealership personnel are aware of this notice so they are able to address customer questions. Contact Warranty if you require additional assistance. Direct press inquiries to Volkswagen
New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. |
-END OF MESSAGE-
Volkswagen Customer Protection
47P8_DLR_LAUNCH
Safety Recall
Code: 47P8
| Subject | Electronic Brake Booster Input Rod | |||||||||||||||
| Release Date | March 24, 2020 | |||||||||||||||
| Affected Vehicles |
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this action. Elsa is the only valid campaign inquiry & verification source.
| |||||||||||||||
| Problem Description | Due to a possible manufacturing error, the electronic brake booster pressure input rod may not be correctly attached to the brake pedal. This may lead to a reduced pedal ratio and to an increased actuating force or to a disconnection of the pressure input rod. Additionally, in the event of a failure of the 12V power supply, the brake performance may be impaired due to the reduced pedal ratio and the resulting increased actuation force. An increased actuating force or a disconnected input rod may lead to abnormal brake behavior and may increase the risk for a crash. | |||||||||||||||
| Corrective Action | Inspect and, if necessary, replace the electronic brake booster and mounting of the pressure rod OR the mounting of the pressure rod only, depending on the inspection results. | |||||||||||||||
| Code Visibility | On or about March 24, 2020, the campaign code will be applied to affected vehicles. | |||||||||||||||
| Owner Notification | Owner notification will take place in April 2020. Owner letter examples are included in this bulletin for your reference. | |||||||||||||||
| Additional Information | Please alert everyone in your dealership about this action, including Sales, Service, Parts and Accounting personnel. Contact Warranty if you have any questions.
IMPORTANT REMINDER ON VEHICLES AFFECTED BY SAFETY & COMPLIANCE RECALLS New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied. By law, dealers must correct, prior to delivery for sale or lease, any vehicle that fails to comply with an applicable Federal Motor Vehicle Safety Standard or that contains a defect relating to motor vehicle safety. Pre-Owned Vehicles in Dealer Inventory: Dealers should not deliver any pre-owned vehicles in their inventory which are involved in a safety or compliance recall until the defect has been remedied. Dealers must ensure that every affected inventory vehicle has this campaign completed before delivery to consumers. Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete. Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com. |
Parts Information (if required)
| IMPORTANT PARTS INFORMATION |
DO NOT ORDER FOR STOCK!
Dealers are required to e-mail a clear photo of a damaged brake booster push rod mount or misinstalled brake booster push rod when placing a parts order. |
| Part Number | Parts Control Type | Instructions |
| 5Q0-721-165-C
3Q1-614-105-AM | E-mail to Order | US and Canadian Dealers: Email the VIN and a picture of the damaged/mis-installed component to Parts Specialists at VWoAPartsSpecialists@vw.com to order |
| N -907-611-03 | Free Order | Parts will be managed by Free Order |
| Initial Allocation:
NO | Due to the small number of affected vehicles there will be no parts allocation. Please reference the Repair Projection Tool (below) to view your potential VIN population. |
| Repair Projection Tool: (right click to open) |
| Criteria | Quantity | Part Number | P.O.C. Part Description | Ordering Method |
| 02 | 1 | 5Q0-721-165-C | Mounting | E-mail to Order |
| 4 | N -907-611-03 | Nut | Free Order | |
| 1 | 3Q1-614-105-AM | Brake servo (if necessary) | E-mail to Order | |
| Up to 1L | SEE ETKA | Brake Fluid (if necessary) | Free Order |
| IMPORTANT PARTS INFORMATION |
Brake Fluid Ordering Information
|
| NOTE |
| The specified part numbers reflect the status at the start of this service action. Interim updates made in ETKA can cause a listed part number to become unavailable. In this case, the new part number specified in ETKA should be used. |
Claim Entry Instructions
| The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order. If customer refused campaign work:
| |||
| Service Number | 47P8 | ||
| Damage Code | 0099 | ||
| Parts Vendor Code | WWO | ||
| Claim Type | Sold vehicle: 7 10
Unsold vehicle: 7 90 | ||
| Causal Indicator | Mark labor as causal | ||
| Vehicle Wash/Loaner | Do not claim wash/loaner under this action
U.S.A.: Loaner/rental coverage cannot be claimed under this action. However, loaner/rental may be covered under the mobility program. Please refer to the Volkswagen Canada: Loaner/rental coverage cannot be claimed under this action. Please refer to t Volkswagen | ||
| Criteria I.D. | 02 | ||
| Inspect brake booster push rod installation, push rod is installed correctly and the mount is not damaged. | |||
| LABOR | |||
| Labor Op | Time Units | Description | |
| 0183 00 99 | 20 | Inspect brake booster push rod, no further work required | |
| -OR- | Inspect brake booster push rod installation, push rod is installed correctly but the mount is damaged, replace brake booster push rod mount. | ||
| LABOR | |||
| Labor Op | Time Units | Description | |
| 4605 41 99 | 130 | Replace brake booster push rod mount | |
| PARTS | |||
| Quantity | Part Number | Description | |
| 1.00 | 5Q0721165C | Mounting | |
| 4.00 | N 90761103 | Nut | |
| -OR- | Inspect brake booster push rod installation, push rod is not installed correctly, replace brake booster, replace brake booster push rod mount, bleed brake system and perform GFF operations | ||
| LABOR | |||
| Labor Op | Time Units | Description | |
| 4605 41 99 | 130 | Replace brake booster push rod mount | |
| 4770 55 99 | 150 | Replace brake booster | |
| 4770 25 99 | Time stated on diagnostic protocol | Perform GFF operations for new brake booster | |
| PARTS | |||
| Quantity | Part Number | Description | |
| 1.00 | 5Q0721165C | Mounting | |
| 1.00 | 3Q1614105AM | Brake serv (brake booster) | |
| 2.00 | B 000750M2 | Brake Fluid (one bottle = 0.5 liter) NOTE: Part number is for claiming only | |
| 4.00 | N 90761103 | Shouldered hex. nut | |
Customer Letter Example (USA)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
NHTSA: 20V135
Subject: Safety Recall 47P8 – Electronic Brake Booster Input Rod
Dear Volkswagen Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Volkswagen has decided that a defect, which relates to motor vehicle safety, exists in certain 2019 model year Volkswagen Arteon vehicles. Our records show that you are the owner of a vehicle affected by this action.
| What is the issue? | Due to a possible manufacturing error, the electronic brake booster pressure input rod may not be correctly attached to the brake pedal. This may lead to a reduced pedal ratio and to an increased actuating force or to a disconnection of the pressure input rod. Additionally, in the event of a failure of the 12V power supply, the brake performance may be impaired due to the reduced pedal ratio and the resulting increased actuation force. An increased actuating force or a disconnected input rod may lead to abnormal brake behavior and may increase the risk for a crash. |
| What will we do? | To correct this defect, your authorized Volkswagen dealer will inspect and, if necessary, replace the electronic brake booster and mounting of the pressure rod OR the mounting of the pressure rod only, depending on the inspection results. In most cases this work will take about an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule. |
| What should you do? | Please contact your authorized Volkswagen dealer without delay to schedule this recall repair. To set up an appointment online, please visit www.vw.com/find–adealer. |
| Lease vehicles and address changes | If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card and mail it to us so we can update our records. |
| Can we assist you further? | If your authorized Volkswagen dealer fails or is unable to complete this work free of charge within a reasonable time, or if you should have any questions about this communication, please reach out to us using your preferred method of communication at www.vw.com/contact or by calling us at 800-893-5298. |
| Checking your vehicle for open Recalls and Service Campaigns | To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit www.vw.com/owners/recalls and enter your Vehicle Identification Number (VIN) into the Recall/Service Campaign Lookup tool. |
If you still cannot obtain satisfaction, you may file a complaint with: The Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Volkswagen Customer Protection
Customer Letter Example (Canada)
<MONTH YEAR>
<CUSTOMER NAME>
<CUSTOMER ADDRESS>
<CUSTOMER CITY STATE ZIPCODE>
This notice applies to your vehicle: <MODEL YEAR> <BRAND> <CARLINE>, <VIN>
Transport Canada Recall: 2020-092
Subject: Safety Recall 47P8 – Electronic Brake Booster Input Rod
Dear Volkswagen Owner,
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Our records show that you are the owner of a vehicle affected by this action.
| What is the issue? | Due to a possible manufacturing error, the electronic brake booster pressure input rod may not be correctly attached to the brake pedal. This may lead to a reduced pedal ratio and to an increased actuating force or to a disconnection of the pressure input rod. Additionally, in the event of a failure of the 12V power supply, the brake performance may be impaired due to the reduced pedal ratio and the resulting increased actuation force. An increased actuating force or a disconnected input rod may lead to abnormal brake behavior and may increase the risk for a crash. |
| What will we do? | To correct this defect, your authorized Volkswagen dealer will inspect and, if necessary, replace the electronic brake booster and mounting of the pressure rod OR the mounting of the pressure rod only, depending on the inspection results. In most cases this work will take about an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need additional time for the preparation of the repair, as well as to accommodate their daily workshop schedule. |
| What should you do? | Please contact your authorized Volkswagen dealer without delay to schedule this recall repair. |
| Lease vehicles and address changes | If you are the lessor and registered owner of the vehicle identified in this letter, you shall forward this letter (and any subsequent notice, if applicable) to the lessee within ten (10) days of receipt. If you have changed your address or sold the vehicle identified in this letter, please fill out the enclosed prepaid Owner Reply Card and mail it to us so we can update our records. |
| Can we assist you further? | If your authorized Volkswagen dealer fails or is unable to complete this work free of charge within a reasonable time, please contact Customer Relations, Monday through Friday from 8AM to 8PM EST by phone at 1-800-822-8987 or via our “Contact Us” page at www.vw.ca. |
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Sincerely,
Volkswagen Customer Protection
SEOCONTENT-START
Repair Overview
Inspect brake booster push rod installation.
NOTE
These repair instructions may differ from the labor operations and labor times listed in ELSA.
Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.
This procedure must be read in its entirety prior to performing the repair.
Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not
identically match all affected vehicles.
Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate
inside the shop to avoid temperature-related component damage/breakage.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2020 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2020 47P8 Page 8 of 14
Required Tools (only if brake booster and/or push rod mount requires replacement)
Release Tool
-T10159B-
(NOT required for
inspection, may only be
required for push rod
mount replacement)
Brake Filling and Bleeding
Equipment
-VAS6860-
(or equivalent)
(Required for booster
replacement only)
Battery Tester/Charger
– GRX3000VAS-
(or equivalent)
(Required for booster
replacement only)
Diagnostic Tester
-VAS6150X-
(or equivalent)
(Required for booster
replacement only)
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2020 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2020 47P8 Page 9 of 14
Repair Instruction
Section A – Check for Previous Repair
TIP
If Campaign Completion label is present, no further work is required.
Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a copy
with the repair order.
Confirm the Campaign/Action is open <arrow 1>.
If the status is closed, no further work is required.
Note the Applicable Criteria ID <arrow 2> for use
in determining the correct work to be done and
corresponding parts associated.
Proceed to Section B
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2020 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2020 47P8 Page 10 of 14
Section B – Brake Booster Push Rod Inspection
Inspect brake booster push rod installation:
Use an inspection mirror to inspect the
installation of the brake booster push rod on
the back side of the brake pedal.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2020 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2020 47P8 Page 11 of 14
If the brake booster push rod is installed
correctly (as shown) and none of the locking
tabs are broken:
o No further work is required.
o Proceed to Section E.
If the brake booster push rod is installed in the
incorrect position (as shown):
o Take a clear photo of the condition for
documentation purposes.
o The brake booster must be replaced
(See Section C).
o The push rod mount must be replaced
(See Section D).
o After all work is complete, Proceed to
Section E.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2020 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2020 47P8 Page 12 of 14
If the brake booster push rod is installed in the
correct position, but any of the brake booster
push rod tabs are broken (as shown):
o Take a clear photo of the condition for
documentation purposes.
o The push rod mount must be
replaced.
o Proceed to Section D.
o After all work is complete, Proceed to
Section E.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2020 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2020 47P8 Page 13 of 14
Section C – e-BKV Brake Booster Replacement
Replace the e-BKV Brake Booster:
WARNING
Refer to all warning and cautions published in the
ELSA Repair Manual.
See ELSA Repair Manual: Repair Manual >
Chassis > Brake System > 47 Hydraulic
Components > Brake Booster/Brake Master
Cylinder > Brake Booster, Removing and
Installing > e-BKV, Removing and Installing
Part Number Part Description
3Q1-614-105-AM e-BKV Brake Booster
SEE ETKA Brake Fluid
Section D – Brake Booster Push Rod Mount Replacement
WARNING
Refer to all warning and cautions published in the
ELSA Repair Manual.
Remove the brake pedal with the mounting
bracket:
The brake pedal does not require separation
from the mounting bracket.
See ELSA Repair Manual: Repair Manual >
Chassis > Brake System > 46 Mechanical
Components > Brake Pedal > Mounting
Bracket, Removing and Installing
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen dealer. 2020 Volkswagen Group of America, Inc. and Volkswagen Canada. All Rights Reserved.
March 2020 47P8 Page 14 of 14
Replace the brake booster push rod mount:
Press the locks in the direction <arrows> and
remove the mount from the brake pedal.
Install the new mount in the brake pedal in the
opposite direction of removal.
Ensure that the latches snap into place
audibly.
Install the brake pedal with mounting bracket
in opposite direction of removal.
The brake pedal mounting bracket nuts and
brake booster mounting nuts must be
replaced.
Part Number Part Description
5Q0-721-165-C Mount
N -907-611-03 Nut
Section E – Campaign Completion Label
Install Campaign Completion Label
Fill out and affix Campaign Completion
Label, part number CAMP 010 000, next to
the vehicle emission control information
label.
TIP
Ensure Campaign Completion Label does not cover
any existing label(s).
Proceed to Section F.
Section F – Parts Return/Disposal
Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local
requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S. and
the Part Destruction and Core Disposition Report for Canada.
SEOCONTENT-END
Safety Recall 47P8
What vehicles are included in Safety Recall 47P8?
| Country | Beginning Model Year | Ending Model Year | Vehicle | Vehicle Count |
| USA | 2019 | 2019 | ARTEON | 732 |
What is the safety concern for Safety Recall 47P8?
Due to a possible manufacturing error, the electronic brake booster pressure input rod may not be correctly attached to the brake pedal. This may lead to a reduced pedal ratio and to an increased actuating force or to a disconnection of the pressure input rod. Additionally, in the event of a failure of the 12V power supply, the brake performance may be impaired due to the reduced pedal ratio and the resulting increased actuation force. An increased actuating force or a disconnected input rod may lead to abnormal brake behavior and may increase the risk for a crash.
What is the repair for Safety Recall 47P8?
To correct this defect, dealers will inspect and, if necessary, replace the electronic brake booster and mounting of the pressure rod OR the mounting of the pressure rod only, depending on the inspection results.
When will the repair for Safety Recall 47P8 be available?
To remove the safety defect, dealers will inspect and, if necessary, replace the electronic brake booster and mounting of the pressure rod OR the mounting of the pressure rod only, depending on the inspection results. This repair can be scheduled now with an authorized Volkswagen dealer. To schedule an appointment, click here.
Volkswagen will notify all affected owners via first-class mail to let them know the recall repair is available.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| VOLKSWAGEN | ARTEON | 2019 |
11 Associated Documents
Recall Acknowledgement
RCAK-20V135-4920.pdf 244.259KB
Loading...
Reload document 
Open in new tab
Owner Notification Letter(Part 577)
RCONL-20V135-0642.pdf 130.038KB
Loading...
Miscellaneous Document-47P8 Recall FAQ
RMISC-20V135-9503.pdf 129.411KB
Loading...
Defect Notice 573 Report
RCLRPT-20V135-9139.PDF 215.122KB
Loading...
Owner Notification Letter(Part 577)
RCONL-20V135-8733.pdf 109.136KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V135-3051.pdf 200.375KB
Loading...
Remedy Instructions and TSB
RCRIT-20V135-6521.pdf 693.605KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V135-7360.pdf 193.039KB
Loading...
Recall Quarterly Report
RCLQRT-20V135-0857.pdf 211.154KB
Loading...
Recall Quarterly Report #2, 2020-3
RCLQRT-20V135-4505.PDF 211.254KB
Loading...
Recall Quarterly Report #3, 2020-4
RCLQRT-20V135-9521.PDF 211.337KB
Loading...
Latest Recalls Documents
- High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
- Extended Service Interval (ESI): Lasts 100 percent longer than DOT 3, 50 percent longer than DOT 4, and 10 percent longer than DOT 5. 1
- Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
- Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
- Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
- Helps provide protection against brake failure from vapor lock
- Helps prevent corrosion in brake system
- Works with all brake system requiring DOT 3 fluids
- Exceeds federal motor vehicle safety standard No. 116
- Meets SAE spec. J1703.
- The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
- Provides corrosion protection in brake components
- Matches needs of all DOT 4 manufacturer recommendations
- Compatible with all DOT 3 and DOT 4 applications
- Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
- Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
- Mixes with all DOT 3 approved brake fluids
- Designed for use in disc, drum and ABS brake systems
- Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
- High boiling point to minimize brake fluid boiling and vapor lock
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- Synthetic quality brake fluid
- Contains special ingredients to guard against vapor lock and moisture absorption
- Exceeds requirements for both DOT 3 and DOT 4 brake fluids
- Specially formulated for DOT 4 brake fluid applications
- Designed for use in disc, drum and ABS brake systems
- An exclusive European formula with an exceptionally high boiling point and superior anti-vapor lock characteristics
- Superior braking during arduous conditions like racing and rallying
- Typical wet boiling point is 270deg. C
- Minimal decrease of boiling point due to excellent water locking properties
- Non-foaming when filling and bleeding the brake system
- Excellent corrosion protection due to selected additives
- High safety tolerance against steam bubbles
- Makes brake fluid changing intervals of up to 3 years possible
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.